Furnishing Work Of Guest House at Nagar Untari District-Garhwa for the year-2023-24

Amount

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastersd wall surface to prepare the surface even and smooth complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.Mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate,suitable GI box etc. as required.

Wiring for twin control light point with 1.5 Sq.Mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch, modular plate,suitable GI box etc. as required.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor single core cable in surface/ recessed PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular Type Switch, connection, painting etc. as required.

Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection, painting etc. as required.

Supplying and fixing of following modular switch/ socket outlet on the existing Modular plate & switch including connection but excluding modular plate etc. as required.

5/6 amps switch

3 pin 5/6 amp socket outlet

15/16 amp switch

6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box Boxes alongwith modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (78mmX78mmX45mm)

6 Module (78mmX205mmX50mm)

8 /9Module (78mmX230mmX60mm)

12 Module (135mmX205mmX60mm)

SSupplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required

Telephone Socket outlet

TV Antenna socket outlet

Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required :

Supply and drawing co-axial TV cable RG-6 grade copper conductor PE insulated,with PVC sheath in the existing surface / recessed PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Supplying and fixing following way, three pole and neutral, sheet MCB distribution board 415 volts,on surface /recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, Phosphatized and powder painted including earthing etc. as required (But without MCB / RCCB / Isolators).

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing following 240 volts `C' series, miniature circuit breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps & regulator etc. ISI marked complete as required..

Installation, testing and commissioning of pre-wired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm.) with 1.5 sq. mm. FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (Plang Double Bed) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (Study Desk ) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (TV Stand ) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (TV Stand & Fridge Con) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (Wardrobe, ) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making LUGGAGE TABLE with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

S/F/F all height 6mm thik Mirror paneling of 19 mm thick water proof ply (centure panic Pine wood, ISI Mark,Termites) over 2"x1" aluminium section, 6 mm thick all side polished Mirror all complete including all taxes and royalty all complete as per building specification and direction E/I

Providing and fixing Door Frame with 19mm b.w.p block board & plywood CONFORMING TO IS:710 GRADE OF APPROVED MAKE & BRAND (green ply, century ply or equivalentand Pasting with 1 mm Laminate with material and labour all complete as per building specification and direction of E/I.

Repair of Flush Door with both side 6mm Ply Wood Century or ISI mark water proof ply grade and Pasting with 4 mm Veneer of Green Decor Make at both side with all material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Supply providing and fixing all height wall paneling of 19 mm thick water proof ply (centure panic Pine wood, ISI Mark,Termites) over 2"x1" aluminium section, 4 mm thick water proof veneer (green decor wood) finishing with malamine polished all complete including all taxes and royalty all complete as per building specification and direction E/I

Providingand Fixing Accoustic Fabric Head board Padding with 6mm Ply Wood Century or ISI mark water proof ply grade all material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Providing and fixing of 8 mm wooden laminate floor with 2 mm thick Kini Foam under layer (Make :- Action, Green, Deco foot or Equivalent.)

Supplying and Fixing & Fitting of Window Curtain in the direction of E/I.

Supplying and Fixing & Fitting of Carpet in main door, in the direction of E/I. (Size- 60x90CM)

Supplying and Fixing & Fitting of Footmat in the direction of E/I. (Size- 75cm X45cm)

Supplying and Fixing & Fitting of Towel in the direction of E/I. (Size- 60X40 cm)

Supplying and Fixing & Fitting of Hand Towel in the direction of E/I.

Supplying and Fixing & Fitting of Pillow in the direction of E/I.

Supplying and Fixing & Fitting of Quilt Double in the direction of E/I.

Supplying and Fixing & Fitting of Bedsheet Double Cover in the direction of E/I.

Supplying and Fixing & Fitting of Kaleen in the direction of E/I.

Supplying and Fixing & Fitting of Sleepwell Utsav 1.0, 78 x 72x 5(Mattress) in the direction of E/I.

Supply and installation of Mortice Lock as per specification and direction of E/I. (Make :- AKS, Godrej or Equivalent)

ROUND TABLE : Providing & Fixing of Round Table of 600mm Dia. & 450mm height Understructure & Legs made up of Teakwood Frame as per drawing & Top is made Up Of 12mm thick Glass Supported On Teakwood Frame. Teakwood member Finished With melamine polish.

SOFA CHAIR : Providing & Fixing of Chair Made Up of Teakwood Structure as per drawing. Seat Provided With 100mm thick Foam of 40 density & 50mm thick foam at Back covered with Tapestry.Teakwood Structure Finished to be With Mellamine Polish.

1 SEATER SOFA (Size- 750mmx750mmx seat height- 400mm & seat back height-750 mm)- S & F sofa frame work with 18mm plywood seat height 400mm high made of 100mm thk. foam (32 density) & 750mm high back in sloping form and arm rest on both side as per drawing shall be made of 40 mm thk. foam fixed in basic frame made of 18mm thick plywood. plywood ,seat and back and sides shall be be fully covered and cusioned with Fabric upholstry finish of approved pattern ,texture, color and shade including all fixtures, fasteners, nails, screw, adhesive, gunny cloth etc. complete up to the satisfaction of Engineer- in-charge Single Seater Sofa. (Each Seat Size- 750mmx750mmx seat height- 400mm & seat back height-750 mm). This job includes all Installation, Material & labour etc.complete.All work is to be executed as per the direction and approval of Engineer in charge .

2 SEATER SOFA (Size- 1350mmx750mmx seat height- 400mm & seat back height-750 mm)- S & F sofa frame work with 18mm plywood seat height 400mm high made of 100mm thk. foam (32 density) & 750mm high back in sloping form and arm rest on both side as per drawing shall be made of 40 mm thk. foam fixed in basic frame made of 18mm thick plywood. plywood ,seat and back and sides shall be be fully covered and cusioned with Fabric upholstry finish of approved pattern ,texture, color and shade including all fixtures, fasteners, nails, screw, adhesive, gunny cloth etc. complete up to the satisfaction of Engineer- in-charge Single Seater Sofa. (Each Seat Size- 750mmx750mmx seat height- 400mm & seat back height-750 mm). This job includes all Installation, Material & labour etc.complete.All work is to be executed as per the direction and approval of Engineer in charge .

Providing & Fixing of Chair Made Up of Teakwood Structure as per drawing. Seat & Back Covered With 12mm ply With 60mm Cushion. Teakwood Structure Finished to be With Mellamine Polish.

Supply and instalation of (Theme based Painting) with framing all complete as per specification and direction of E/I.

Dinning table2 seater : Providing & Fixing Of 2 Seater Dining Table Of Size 900mm x 900mm x 750mm. (Hexagon shape) Understructure to be made Up of Teakwood & marble top is to be provided supported on teakwood structure. Teakwood Structure Finished With Meallamine Polish.

RJ 45 socket for Lan cat 6

DND and CMR indicator panel - outside

Supplying, laying, testing and commissioning of following size anealed tinned copper conductor PVC insulated and sheathed copper conductor, unarmoured telephone cable in the existing surface / recessed steel/ PVC conduit with suitable clamps, saddles and including making terminal joints complete as required.

Supply of Recessed Mounting Round 9 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink,diffuser/reflector and driver set complete in all respect of Polycab Cat No COB LED DOWNLIGHT 9W ROUND 6500Kor equivalent

Supply installation testing and commissioning of LED COVE LIGHT STRIP Complete of Havells Cat No LHEHCPP7UN1W048 or equivalent.

Supply and Fixing Hanging Light

Supply and Fixing 2 Watt LED Bed Light

LED SAMSUNG UA50AU7500KLXL Television (1.25M) 4K Ultra HD

Supply nd Fixing Refrigeratot, Storage Volume 50 Liter. Brand Haier Model/ Year :- HR-65/2022

Voltas make Inverter Split Air Conditioner (5 Star ISEER)-100%- Copper) 1.5 TR

Voltas Make Automatic Voltage Stabilizer 4KVA HSN/SAC Code-9032

Refrigerant Copper Pipe HSN/SAC Code-7411

Bracket Angle for Outdoor Unit HSN/SAC Code-7301

Installation Charge of Air Conditioner HSN/SAC

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES