Construction of link road Mansoli to Maloti via Sasan Rainthal Lahar Dhanpur km 0/0 to 3/0

Amount

Preparation and consolidation of sub grade with power road roller of 8 to 12 (Eight to twelve) tonne capacity after excavating earth to an average of 22.5 cm (Twenty two point five centimetre) depth, dressing to camber and consolidating with road roller including making good the undulations etcetra and re-rolling the sub grade and disposal of surplus earth including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) (fifty three millimetre to zero point zero seven five millimetre) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne (eight to ten tonne) capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of roller compacted concrete pavement (RCCP) of M-25 (M-Twenty Five) grade design mix with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25mm (Twenty five millimetre) with minimum cement content not less than 400kg per cum (four hundred kilogram per cubic metre), aggregate gradation to be as per table 602.2 after blending, mixing the concrete mixer at optimum moisture content, transporting to site, laying with wheel barrows or steel pan or with mechanical paver, compacting with 80-100 KN (eighty-hundred) smooth wheel, tandem vibratory roller to achieve the designed flexural strength, finishing and curing as per MoRD drawing and technical specification clause 1502 including entire carriage of materials within all leads and lifts as per the direction of Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

RAJESH KUMAR GOVT CONT.