SPECIAL REPAIR OF BLDG NO T-08 (QTR GD) AND T-11 (GUN SHEDS) AT FARIDKOT MIL STN

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. All as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified by Engr in charge

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.by engr in charge

Dismantling un-framed work timber scantlings, purlins 40 sq. cm and over in section, in any position

M & L for (Fe 410W grade E-250 quality A) MS roof trusses (framed), trussed, purlins, crane gantries,gate rails and fastenings and heavy bracket framing (Beam, tee, angle, channel,Rectangular tubular Section or flat sections) including distance pieces, cleats etc.

Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:4

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames).

S&F Aluminium frame for doors, window with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements to fix guard bars and S&F of PVC sleeves for guard bars. Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge. Note : Guard Bars shall be measured and paid for separetely.

S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note : Only Glass and wiremesh will be measured and paid seperately.

S&F Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos) for each shutter, hinges type B-21 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note : Only Glass and wiremesh will be measured and paid seperately.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength 1800 N (face) & 900 N (edge), minimum compressive strength 50 N/mm2 and resistance to spread of flame of Class A category with prperty of being termite/borer prrof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of rquired size with necesary full body threaded counter sunk SS Screws, all as per direction of Engineer-in-Charge. Note : Stainless steel butt hinges shall be paid separately.

S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete.

S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) in Window Grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the Grill with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size as Specified and Directed by Engr-in -Charge

M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified.

S&F Stainless steel wire cloth 0.40 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc., complete all as specified

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not other wise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge

S&F 140 mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor all as specified.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.

S&F 7 to 8mm thick PVC laminated gypsum board as in ceiling fixed with screws as per manufacturer's instructions, including anodised aluminium snap grid frame work for false ceiling of grid 605x605mm, hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm and expansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed. Note : Quoted rate of the item deemed to be included for refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of ceiling.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for Cement concerete type B0, 1:2:4 (12.5 mm graded aggregate) 25 mm thick as in floors and finishing concrete surface even and smooth .

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm,(600 X600mm) cut to reqd size and shape as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, (400 X400 mm) as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete all as specified as directed by Engr-in- Charge.

M&L Granite (of any type) work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified as directed by Engr-in- Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises completeall as specified as directed by Engr-in- Charge.

S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work. (Highlighter shall be provided as directed by Engr-in-Charge).

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store.

Supplying and laying of CPVC pipes ISI SDR 11 pipe 20mm outer dia with all fittings solvent and fixed to wall and Ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified.

S&F in repair Rotational moulded polythylene 500 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. & dismantling of old water tank complete all as specified.

S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F Brass CP Basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.

S&F in repairs 15 mm bore mixing valve (wall Mixer) 3 in 1 with flexible tube 1.00 m & hand shower complete chromium plated fancy type complete all as specified and directed.

S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified.

S&F in repair Wash hand basin flat back 550x400mm vitreous china (white) with cantilever aluminium alloy brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified by Engineer in Charge.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor.

S & F PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make.

S&F in repair Vitreous China Urinal, Half stall type, white excluding fixing bolts, flushing cistern and flush pipe all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.

S&F Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

M&L for 25mm dia stainless steel cromium plated MS Pipe curtain rod with decorative brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories).

S & F 110 mm bore of pipe uPVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S & F 75 mm bore of pipe uPVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S & F 110 mm bore of pipe uPVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed.

S & F 75 mm bore of pipe uPVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed

M&L for uPVC (SWR) 'P’ trap 110mm dia complete all as specified.

M&L for 75mm dia of long body uPVC Floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified.

M&L uPVC (SWR) junction single,(Single T), 75 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.

M&L uPVC (SWR) junction single,(Single T), 100 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.

S&F in repairs uPVC (SWR) vent cowl 100 mm complete all as specified and directed.

S&F Salt-glazed stoneware gully traps 150x 150 mm , square or round mouthed, tvpe 'P.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc.

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement .

M&L for Rendering 15 mm thick in cement plaster 1:4 on surface other than fair face of brickwork or stone masonry surfaces or on one side of lathing, finished even and smooth without using extra cementcomplete all as specified and directed by Engr -in - charge.

M&L preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over 1mm coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr -in - charge.

M&L preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed by Engr -in - charge.

M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.

Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed in wall /roof/ceiling surface in existing rigid concealed conduict suitable size with

Taking down MCB/ MCCB of any make and making good to disturbed area all as specified and directed by Engr-in-Charge.

Taking down submain wiring 2 run/ 4 run with earthing cable and making good to disturbed area.

Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLSH with multistranded copper conductor drawn through existing PVC rigid concealed conduit & including provn of 1.6 mm thick galvanised steel pressed modular boxes of suitable sizes for mounting of modular switches, sockets, fan regulator etc covered with modular cover plate of required size fixed with brass screws and cup washers & including 1.5 sqmm copper conductor as earth continuity to connect common earth dolly complete for one light point/Fan/Exhaust point controlled by One way switch all as specified and as directed:-

All as per Item No 74 here in before but for One three pin socket out let 5 amps on the same board with other switches, complete as specified and as directed.

All as per Item No 74 here in before but for One 3 pin, 5A switch socket outlet point on independent board, complete as specified and as directed.

All as per item no. 74 here-in-before but with 2.5 sqmm cable for 1 No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor as earth continuity conductor.

S&F exhaust fan AC single phase 220/240 V size 300 mm sweep with louvers including cutting hole and making good all as specified and directed by Engr-in-Charge.

Supply and fixing PVC Lamp holder suitable for LED 5 to 20 watt blub complete all as specified and directed.

Supply and fixing LED averter rechargeable bulb for 4 hours power backup of power rating 500 Watt having Lamp lumnous efficiency not less than 100 lumens/watt all as per specified and directed by Engr-in-Charge.

Supply and fixing of rechargable LED tube light fiting 20W (4 feet long), 230 V surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge. Note : LED tubelight must be rechargeable.

M&L ceiling rose 3 terminal / PVC / polycarbonate isolated body all as per specification and directed by Engineer-in-Charge.

M&L submain wiring with two single core PVC FRLSH insulated copper conductor 6 sqmm and same 6 sqmm for continuous earth wire drawn in to existing concealed PVC conduit complete all as specified and directed by Engr-in-Charge. Note : Cost of earth wire included in sub main wiring.

Supply & fixing ceiling fans BLDC type regulator operated complete with blades, down rods and accessories, 230 V, 1200 mm sweep, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing Modular switch 1 way 6 amps one module switch all as specified and directed by Engr-in-Charge.

Supply and fixing Modular socket 6A 2/3 pin, 2 module socket all as specified and directed by Engr-in-Charge.

Supply and fixing Modular switch 1 way 16 amps 1 module switch all as specified and directed by Engr-in-Charge.

Supply and fixing Modular socket 6A / 16A - 2/3 pin, 2 module all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note : MCCB/MCB shall be measured and paid separately under appropriate item of BOQ.

S&F sheet metal enclosure for DB's SPN 230 volts 8 way double door complete all as specified and directed.

S&F MCCB 4 pole, 415 V. adjustable type, 100 Amp with breaking capacity 16 KA complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN current carrying capacity 40 to 63 Amp, in the MCB DB Complete with connection all as specified and directed by Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia upto earthing test point / equipment fixed with 2 Nos. of mold steel clamps made out of 25mm x 3mm flat iron and preforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 complete all as specified and directed by Engineer-in-Charge. Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is encluded in this item. (iii) Water pipe shall be provided in slainting position.

Supply and fixing in replacement energy efficient LED Security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications, including taking down old Unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge.

Supply and laying Rigid non-metallic PVC conduit size 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. with all fitting including taking down old Unserviceable pipe any type complete all as specified.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electronic power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 2 Core complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 Type B1 using 40 mm graded stone aggregates as in Sub Base of flooring complete All as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Dismantling posts (embeded in Concrete, brick work, masonry, etc.) or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground and removing dismanteled material to MES store complete as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation & mass concrete etc complete all as specified.

Dismantling fencing wire mesh any type and removing dismanteled material to MES store complete as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165.

S&F 11 to 15 mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

S&F mild steel round bars 10mm dia cut to length, bent to shape as required and fixed in fencing confirming to Fe 410-Wor Fe 290 complete all as specified.

Supply only MS galvanised chain link wire mesh of approved size of mesh as in fencing with 3.15mm dia galvanised steel wire all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

S&F in repairs galvanised 2 strand steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins all as directed. (Each line wire to be measured).

Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic paint over one coat of red oxide primer complete all as directed.