Construction of Hostel Block (Male / Female) for Residents, Interns and Nurses at Teaching Hospital Doda..

Amount

Earth work in excavation by mechanical means in trenches (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, disposed earth to be levelled and neatly dressed: All kinds of soil (including all leads, lifts and carriages)

Supply and laying of stone soling hand packed broken stones in layers (including all leads, lifts and carriages)

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (including all leads, lifts and carriages)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering (including all leads, lifts and carriages)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) (Crushed) (including all leads, lifts and carriages)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (Crushed) (including all leads, lifts and carriages)

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. (Crushed). (including all leads, lifts and carriages)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) crushed M 20 grade (including all leads, lifts and carriages)

Reinforced cement concrete work in walls (any thickness), excluding attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level including cost of centring, shuttering, fmishing and reinforcement. 1:1:2 (1 cement: 1 coarse sand : 2 graded crushed stone aggregate 20mm nominal size) crushed M 25 G (including all leads, lifts and carriages)

Providing and laying in position machine· batched, machine mixed and machine vibrated -design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-45 grade reinforced cement concrete (including all leads, lifts & carriages). (Complete job)

Centring and shuttermg including strutting, propping etc. and removal of form for·

Foundations: footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and centilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiralstaircases.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. (including all leads, lifts and carriages)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) (including all leads, lifts and carriages)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all leads, lifts and carriages)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. First class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt· hinf!eS bright finished of required size with necessary screws.First class kail wood

Providing and fixing of glass panes weighing 4 mm thick glass panes with wood fillets complete job

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) (including all leads, lifts and carriages)

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper

Providing and fixing of PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom W.C. doors) using synthetic rubber based adhesive.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm (including all leads, lifts and carriages)

Tile work in skirting, risers of steps and dado (upto 2m height) over 12 mm thick bed of cement mortar 1:3 ( 1cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 8 mm thick (including all leads, lifts and carriages)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (including all leads, lifts and carriages)

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. (including all leads, lifts and carriages)

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape (Area of slab upto 0.5 sqm) 18 mm thick

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) (including all leads, lifts and carriages)

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Wall Painting with plastic emulsion paint of approved lj brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 litre/1 Osqm over and including base coat of water proofing cement paint applied@ 2.20kg/1 Osqm)

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (including all leads, lifts and carriages)

Providing corrugated Colour-Coated sheet profile roofing fixied with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses. 0.63 mm thick with zinc coating not less than 275gm/m2

Providing ridges or hips of width 600 mm overall width Colour-Coated sheets fixed ith polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275gm/m2

Providing valleys of 90 cm wide overall in Colour-Coated sheets fixed ith polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m2

Providing and fixing of 15 cm wide 45 cm overall semicircular plain GS sheet gutter with iron brackets 40x3 mm size bolts nuts and washers etc including making necessary connections with rain water pipes cmplete. 0.80 mm thick with zinc coating not less than 275gm/ m2

Electrification (See approaved makes of all electric materials attached as Annexure-A = 6 lvs Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable GI box nd earthing the point with 1.5 sqm. GRLS PVC insulated copper conductor single core cable etc.as required.

Group A

Wiring for twin control light point with 1.5 sqm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class conduit with 2 way modular switch modular plate suitable GI box and earthing the pint with 1.5 sqm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light / power plug points with 2 x 4 sqm. FRLS PVC insulated, Cu. Conductor, single core cable in surface/ recessed medium class PVC conduct along with 1 No. 4 sqm. FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2x1.5 sqm. + 1x 1.5 sqm. Earth wire

2x 2.5 sqm. + 1x 2.5 sqm. Earth wire

2x 6 sqm. + 1x 6 sqm. Earth wire

2x 10 sqm. + 1x 6 sqm. Earth wire

4x 10 sqmm + 2x 6 sqmm earth wire

4x 16 sqmm + 2.x 6 sqmm earth wire

Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recessed including cutting the wall & making good the same in case of recessed conduit as required.

25 mm dia

32 mm dia

Supplying and fixing of following modular switch/ sockety on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5 /6 amps switch

15/16 amp switch

3pin s / 6 amp socket outlet

6 pin 15/ 16 amp socket outlet

Supplying and fixing of stepped type 2 module electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing of following size/ modules, GI box alongwith modular base & cover plate for modular switches in reess etc as required.

1 or 2 module ( 75mm x 75mm)

3 module ( 100mm x 75mm)

4 module (125mm x 75mm)

6 module (200mm x 75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amp modular socket outlet and 5/6 A modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 2 Nos, 3 pin 5/6 A modular socket outlet and 2 Nos 5/6 A modular switch, connections etc. as required. (for light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amp modular socket outlet and 15/16 A modular switch, connection etc. as required.

Supplying and fixing of 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Installation, testing and commissioning of pre-wiredm, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the dmage, connection, testing, commissioning etc. as required.

upto 450 mm sweep

Providing and fixing circular/ hexogonal cast iron or M. S sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top led of 1.5 mm thick M.S sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S sheet box by means of 3.3 mm dia round headed screws, one lock at the corners, clamp shall be made of 12 mm dia M.S bar bent to shape as er standard drawing.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 amp, 16 KA, TP MCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface. Recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (But without MCB/RCCB/Isolator)

8 way, double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface. Recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (But without MCB/RCCB/Isolator)

6 way (4+18) double door

8 way (4+24) double door

Supplying and fixing following ways surface /recess mounting, vertical tupe,415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs,(but without MCBs and incomer) as required. (Note; - vertical tupe MCB TPDB is normally used where 3 phase outlets are required.)

8 way double door

Supplying and fixing 5 amps to 32 amps rating 240/415 volts C curve miniature circuit breaker suitbale for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Single Pole Neutral

Double Pole

Triple Pole

Triple Pole & Neutral

Supply and fixing of single pole blanking plate in the existing MCB DB complete etc. as required

Supplying & fixing of following rating double pole (single phase and neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milli- amperes in the existing MCB DB complete with connections, testing and commissioning etc, as required.

Supplying and fixing 20 A, 240 V, SPN industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Supply & fixing of following sizes of Steel conduit along with accessories in surface / recessed including painting in case of surface conduit,or cutting the wall & making good the same in case of recessed conduit as required,

25 mm dia.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia.- ISI MARK

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia.

Supplying and drawing of UTP 4 pair CAT6 LAN cable in the existing surface /recessed steel /PVC conduit as required. (for Telephone Outlet in existing conduit)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Telephone socket outlet

Supply and fixing of following size/ modules, GI box along with modular base & cover plate for modular switch/ regulator in recess, including connection as required.

1or 2 module (75mmx 75mm)

Earthing with G.I. earth Plate 600mm x 600mm x 6mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc. with charcoal or coke and salt ) as required.(For Body earthing of euipments )

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Primary point controlled by one MCB.

Same as item above but Secondary point. i.e. Points to be looped with Primary point.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 10/25 amps modular socket outlet and 10/25amps modular Type MCB, connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, onsurface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

12 way,Double door

SITC of 1x12W(Nominal) Surface Mounted LED circular Downlighter(Cat no- Bajaj Lighting BGSLO 12W WH RD or equivalent as specified in the approved list of make.)

SITC of 15W(Nominal)Surface Mounted LED square Downlighter (Cat no- Bajaj Lighting BGSLO Sleek Surface 15 W WH SQ or equivalent as specified in the approved list of make.)

SITC of 15 W (Nominal) Bracket Light (Bajaj make BJLF2 15W RF or equivalent as specified in the approved list of make).

SITC of 1x18W(Nominal) Wall/Surface mouted LED (Cat no- BLRB-DB118 or equivalent as specified in the approved list of make.) Tubelight

SITC of 5W (Nominal) MIRROR LIGHT (Cat no-BCLSB 05 WH or equivalent as specified in the approved list of make.)

SITC of 10 W(Nominal) Bulk head Light (Cat no-BIBWP 10 W LED or equivalent as specified in the approved list of make.)

1200mm sweep 3 blade energy saving Ceiling fan complete with assembling of blades, down rod, shackle insulator, canopy etc.

Exhaust fan with louver and with 3 core flexible wire of GEC/ Newtek make. 300 mm dia Domestic Exhaust Fan

Intelligent Addressable Manual call points Double Action Stations suitable for wall/column mounting. (UL, ULC listed & CSFM, MEA, FM approved)

MODULES & NOTIFICATION DEVICES Addressable Hooter cum strobe as per specifications to meet the function as , "Audible notification appliances should be silenced at ACK of alarm while the visible notification appliances are kept activated until the alarm condition is reset. Sounder will be 24 V DC input will give 80 db output at 3m and strobe with 110 candela output. (UL, ULC listed & CSFM, MEA, FM approved)

CAT 5 cable complete with termination and testing as per requirement.

BRE Global certified 2c x 1.5 sq.mm Fire Survival armoured cable with Class-2 Copper conductor as per BS EN 60228, twisted, with Mineral ceramic glass fire barrier tape covered by an extruded layer of Cross-linkable Low smoke zero halogen (LSZH) insulation as per BS EN 50363 and LSZH inner & outer sheath as per BS:7846. Should retain Circuit integrity as per clause 26.2e of BS: 5839-1. BRE Global & LPCB-FPC certificates to be provided. Outer sheath should be Anti-Rodent.

Supply, fixing, testing & commisssioning of Modular RJ-45 with data outlet socket with grid & cover plate in suitable size of 16 SWG GI box.

Supply, installation, testing and commissioning of following Category 6 IDC patch panel prepackaged with wiring block with legs insert labels, label holders, jumper troughs, metal back panel, duct assembly, screws, washers and an instruction sheet for termination of incoming pairs. Quoted price shall include suitable lockable enclosure etc. as required.

12 port jack panel-

Supply & instalation of 6U rack- Rittal/ Comrack/ Dynamic

Supply & instalation of CAT6 UTP patch panel UnLoaded-Copper cables terminating within the floor distributor shall be terminated onto patch panels with RJ45 presentation, by means of an insulation displacement connector. The Patch Panel jacks shall be shuttered to prevent the ingress of dust and other contaminants.

Supply & instalation of Cat6 UTP XL Keystone connector

Supply & instalation of CAT6 UTP PATCH CORD 1M - Rack end- The work area equipment cords shall, at a minimum Comply with ANSI/TIA/EIA-568-C.2 Commercial Building Cabling Standards Transmission Performance Specifications for 4 pair 100 Ohm Category 6 Cabling. Category 6 equipment should be industry standard patch cords: • Shall be round, and consist of eight insulated 24 AWG, stranded copper conductors, arranged in four colour-coded twisted-pairs. • Equipped with modular 8-position modular plugs on both ends, wired straight through with standards compliant wiring. • Should have 50 micro inches of gold plating over nickel contacts. • Modular cords should include a moulded strain relief boot.

Supply & instalation of dual Port Face Plate- • Modular Single Gang square (86mm x 86 mm) with 2 ports • Screw hole covers • Should be able to support variety of jacks – UTP, ScTP, FTP etc. • Should facilitate entry for shuttered jacks / information outlets • Two modules or a single module and a blank may be installed in this format. • All outlets shall have facilities for labelling on either the face plate or module. This should be protected by means of clear plastic window.

Supply & instalation of Metal Flush Box - 1/2 module

Supply & instalation of 6 core Indoor/outdoor OM3 Unarmoured Multimode Optical Fiber

Supply, installation, testing and commissioning of following krone type tag blocks enclosed in MS enclosure of suitable size with lockable cover.

10 pair Tag block

Supply, laying, testing and commissioning of following size of 0.61mm dia copper conductor multi pair telephone cable as per suitable for indoor telephone wiring conforming for ITD S/WS - 113 C and S/WS - 114 (actual qty. may vary as per site) in existing conduit/ trench/ tray.

10 pair Ar. Cable

Supply & instalation of CAT6 UTP patch panel UnLoaded

Supply & instalation of Cat6 UTP XL Keystone connector

Supply & instalation of CAT6 UTP PATCH CORD 1M

Supply & instalation of single corded phone with caller ID & hands free phone with rechargable battery, auto redial with 20 redial memory, 20 one touch & 10 speed dialer, ringer indication, progammable flash time setting, programmable tone & pulse setting, three steps ringer volume & dial lock.

Telephone instruments- Caller ID, 3 display lines, Speaker Phone, Ringer LED,Dedicated Button for (Redial, Mute, Flash), alphanumerical keypad, Redial Memory- 20 redial, Phonebook Entries- 50Nos.(Model- Panasonic Kxts-880 Corded Landline Phone or equivalent as per specified approved list of make.)

Lift Panel (Boys Hostel) INCOMER 1 No. 63 A FP MCCB, 16 kA breaking capacity with thermal release and adjustable setting and with rotary handle. METERING & INDICATION 1 set of R,Y,B phase indicating lamps 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB 1 No. (0-63A) Ammeter with ASS with 3 nos.63/5A CT's BUS-BAR 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 3 Nos. 40A TPN MCB, 10 KA. C Curve. 1 Nos.63A SPN MCB, 10 KA. C Curve. 1 Nos.40A SPN MCB, 10 KA. C Curve.

Supply of following sizes of KLPE/ PVC insulated aluminum/ copper conductor strip/ wire armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.

4 x 10 sqmm

4 x 16 sqmm

4 x 25 sqmm

3 1/2 x 95 sqmm

3 1/2 x 120 sqmm

Sanitary Fixtures & Internal Drainage ................................................................ Providing & fixing of water closet squatting pan (indian type w.c.pan) with 100mm sand cast iron P or S trap, 10 liter low level white p.v.c. flushing cistern with manually controlled device (handle lever)conforming to IS:7231,with all fittings and fixtures comlete including cutting and making good the walls and floors wherever required: ( Make - Jaquar CNS - WHT - 453 )

Long pan pattern W.C.pan of size 580mm X 440mm with flush pipe & overflow arrangment.

Providing & fixing of white vitreous china pedestal type water closet(European type) with seat and lid, 10 liter low level white viterous china flushing cistern C.P.flush bend with fittings & C.I.brackets ,40mm flush bend, overflow arrangment with specials of standard make and mosquito proof coupling of approved municipala design complete including painting of fittings and brackets, cutting and making good the wall and Floors wherever required: ( Make - Jaquar CNS - WHT - 555 SNL )

W.C pan with ISI marked white solid plastic seat and lid

Providing & fixing wash basin with C.I. brackets, C.P brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required: ( Make - Jaquar FLS - WHT -5301 )

White Vitreous China Wash basin size 630x450mm with a pair of 15 mm C.P.brass pillar taps.

Providing & fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board. ( Make - Jayna SBSD -01 )

610x510mm bowl depth 200mm

Providing & fixing C.P. brass bib cock of approved quality conforming to IS :8931 ( Make - Jaquar CON - 037 KN ).

15 mm nominal bore

Providing & fixing C.P. brass (Long body)bib cock of approved quality conforming to IS standerd and weight not less then 690 gms. ( Make - Jaquar CON - 107 KN ).

15 mm nominal bore

Providing and fixing 15 mm dia C.P brass angle valves for basin mixer and gyser points of approved quality conformind to is:8931 ( Make - Jaquar CON - 053 KN ).

Providing & fixing of pvc Waste pipe for Wash basins & Sinks including pvc waste fittings complete . ( Make - Jaquar CHT - 083 KN )

32 mm dia

40 mm dia

Providing & fixing mirror of superior glass(of approved quality)and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing.

Rectangular Shape 600x450mm

Providing & fixing toilet paper holder: ( Make - Jaquar AKP 35751 P ).

C.P.brass

Providing & fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. ( Make - Jaquar ACN 1135 N )

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.( Make - Jaquar ACN1121 N )

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. .( Make - Jaquar AQN 7711 B )

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing unplastised P.V.C. connection pipe with PTMT Nuts of approved quality,colour[for connection to Mixers & taps from angle valve. ( Make - Jaquar ALD 803 B )

15 mm nominal bore with 45cm length.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : ( Make - Jaquar SHA 477 )

100 mm diameter

Providing & Fixing of C.P. stop cock concealed of standard design and of approved make conforming to IS; 8931 ( Make - Jaquar CON - 053 KN )

Providing & fixing C.P. brass close hole basin Mixer piller Tap of approved quality and make weighing not less then 1.970 kg. ( Make - Jaquar CON -167 KNB )

Providing & fixing PTMT soap dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements.Weighing not less than 106 gms. ( Make - Jaquar ACN1131 N )

Providing & Fixing C.P brass 32 mm size bottle trap of approved quality & make as approved by engineer - in - charge . ( Make - Jaquar ALD 769 L & ALD 709 )

Providing & Fixing Single lever telephonic wall mixer of approved quality & make as approved by the engineer - in - charge . ( Make - Jaquar HSH 1929 )

15 mm nominal dia

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white viterous china flushing cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litre), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. ( Make - Jaquar FLS WHT 5951 & CNS WHT 201 C )

Providing and fixing C.P. brass twin coat hooks fixed on toilet door with C.P. brass screws including all fittings complete. ( Make - Jaquar ACN1161 N )

Providing and fixing health faucet with 1 m PVC tube and swivel hook including all fittings complete. ( Make - Jaquar ALD 563 )

Providing & fixing C.P. brass central hole Sink Mixer Tap with complete accessories as required. ( Make - Jaquar CON 319 KN )

Providing and fixing vertical or horizontal storage type hot water heater fixed to wall with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm CP brass non-return valve complete including making connections with 15mm dia CP connecting pipes on inlet and outlet, suitable length of power cable and 15 amps plug . ( Make - Venus 15 YVH & 25 YVH )

Geyser 15 liter

Geyser 25 liter

Providing and placing on terrace polythylene with19 mm thick insulation water storage tank of approved brand and manufacture with cover and suitable locking arrangment and making necessary holes for inlet,out let and over flow pipes but without fitting and the base support for tank . ( Make - Sintex or as per approved local Manufacturer )

Providing and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class“O”) insulation on existing water tank after applying Suitable adhesive for nitrile rubber. The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. ( Make - Kaiflex / Careflex / Armaflex )

25 mm thick

Providing and fixing Accoustic Home Technique-PP/Polypropylene piping (PP) piping system with built-in SOCKET pipe in 3 LAYER made of PP-H (Grey)/PP-C (Blue/Ral) outer layer + foam (PP-H)/PPMV middle layer + PP-H white/PP-C (Blue/Ral), push-fit type, food safe, having moderate impact and stiffness, density of pipe not above 1.35 gms/cm3 and not below 0.75gms/cm3, elongation not less than 0.05mm/m⁰K and not more than 0.15mm/m⁰K, chemical resistance as per ISO/TR 10358, the system should be workable from 0 degree to + 90 degree C (short term thermal resistance) with all necessary single molded fittings in grey/blue/ral colour, fitted with factory fitted lip ring including painting for external installation. Connection with mugs and gasket made of EPDM or rubber (EN 681) (supporting standard as per EN 1451) - Noise level equal to or less than 22dBA @ 2lps as per VDI 4100 and 25dBA as per EN14366/DIN 4109 with BISMAT 2000 clamps as per Fraunhofer certification. (Make - Poloplast / Rehau / WOVIN AX )

75 mm dia

110 mm dia

Providing and laying cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate, 20 mm down gauge) 75 mm in bed and all around soil and waste pipes under floor, including shuttering and centering for: - ( Make - Fabricated at Site )

75 mm dia

110 mm dia

Providing and fixing Accoustic Home Technique-PP/Polypropylene piping (PP) piping system with built-in SOCKET pipe in 3 LAYER made of PP-H (Grey)/PP-C (Blue/Ral) outer layer + foam (PP-H)/PPMV middle layer + PP-H white/PP-C (Blue/Ral), push-fit type, food safe, having moderate impact and stiffness, density of pipe not above 1.35 gms/cm3 and not below 0.75gms/cm3, elongation not less than 0.05mm/m⁰K and not more than 0.15mm/m⁰K, chemical resistance as per ISO/TR 10358, the system should be workable from 0 degree to + 90 degree C (short term thermal resistance) with all necessary single molded fittings in grey/blue/ral colour, fitted with factory fitted lip ring including painting for external installation. Connection with mugs and gasket made of EPDM or rubber (EN 681) (supporting standard as per EN 1451) - Noise level equal to or less than 22dBA @ 2lps as per VDI 4100 and 25dBA as per EN14366/DIN 4109 with BISMAT 2000 clamps as per Fraunhofer certification. (For Indirect waste/ Wash Basin/Urinal/Sink/Floor Drain ) (Make - Poloplast / Rehau / WOVIN AX)

Providing and fixing uPVC Trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections. (Make - Supreme/ finolex/ AKG )

110 mm inlet & 110 mm outlet.

Providing and fixing clean out pipe (door piece) for cleaning. (Make - Poloplast / Viega / Mcalpine/ WOVIN AX )

110 mm dia.

Providing, fixing, testing and commissioning of pipe inlet fittings fabricated with PoloPlast/uPVC Pipe with maximum 3 inlets 40, 50 & 75 mm OD size poloplast pipe, fixed to 'P' traps including Dripseal/Pipe seal/solvent weld joint/rubber ring joint complete . (Make - Poloplast / Viega / Mcalpine/ WOVIN AX )

Providing and fixing floor drain (FD) with 50mm outlet and 100 mm inlet with SS grating having 19mm seal for indirect floor drain (FD) (Make - Poloplast / Viega / Mcalpine/ WOVIN AX )

Providing and Fixing stainless steel grating with rim of approved design including setting in floor with cement mortar. (For Floor Trap/Floor Drain) (Make - Neco / neer )

125 mm x 125 mm

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size). ( Make - Fabricated at Site )

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: ( Make - Tata / Jindal Hissar / Jindal Ghaziabad )

15 mm dia. nominal bore

20 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall ( Make - As per Local approved manufacturer )

15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) ( Make - Tata / Jindal Hissar / Jindal Ghaziabad )

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

Painting GI Pipes and Fittings with two coats of anticorrosive bitumastic paint of approved quality

40 mm dia. nominal bore

50 mm dia. nominal bore

Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete ( Make - Fabricated at Site )

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing & fixing ball valve ( brass) of approved quality,High or low pressure, with plastic floats complete:- ( Make - AIP / ZOLOTO / BELIMO )

25 mm dia nominal bore

Providing and fixing ferrul with c.i mouth cover ( Make - Tata / Jindal Hissar / Jindal Ghaziabad )

20 mm dia nominal bore

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : ( Make - As per approved local manufacturer )

15 mm diameter pipe

20 mm diameter pipe

25 mm diameter pipe

32 mm diameter pipe

40 mm diameter pipe

50 mm diameter pipe

Providing and fixing Thermoflex or Careflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. ( Make - Kaiflex / Careflex / Armaflex ) 9 mm thick ( Pipes in Chases)

For 15 mm dia Pipe

For 20 mm dia Pipe

For 25 mm dia Pipe

For 32 mm dia Pipe

For 40 mm dia Pipe

19 mm thick ( Exposed in Shafts & Terrace ) For 20 mm dia Pipe

For 25 mm dia Pipe

For 32 mm dia Pipe

For 40 mm dia Pipe

For 50 mm dia Pipe

For 65 mm dia Pipe

For 80 mm dia Pipe

For 100 mm dia Pipe

Providing and fixing C.I. butterfly valves PN-1.6 complete with bolts, nuts, 1.5 mm thick compressed asbestos gasket and flanges as per Table “E” complete . ( Make – NVR / AIP / Zoloto )

65 mm dia

Providing, fixing, testing and commissioning of motorised butterfly valve of following dia for filling of overhead water tank complete with high and low level control switches to control tanks. The level controllers shall be installed in iverhead tanks. The level switch will close the valve when water level is high in overhead tank and open the valve when overhead water tank level is low. The system should be complete in all respects with accessories 220 V AC / 2 V DC, IP67 electrical water level control unit, copper control wiring in whether proof casing etc. (Make: AIP / Zoloto / Belimo )

40 mm dia NB Float Valve

50 mm dia NB Float Valve

Providing and Fixing full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tasted to a pressure not less than 15 kg/sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. ( Make – NVR/ AIP / Zoloto )

15 mm dia

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Providing and fixing M.S. puddle flanges fabricated out of 5 mm thick M.S. plate of size 200 x 200mm plus dia of pipe of 750 mm long pipe pieces to R.C.C. water tanks / R.C.C. walls. The entire fitting shall be hot dipped galvanised. ( Make - Fabricated at site )

25mm dia

50mm dia

65mm dia

80mm dia

100mm dia

150mm dia

Providing and fixing GI pipes complete (IS:1239 medium class) with GI fittings and clamps including MS pipe supports, enamel paint as per speicifications cutting and making good the walls etc. complete. ( Make - Tata / Jindal Hissar / Jindal Ghaziabad )

65 mm dia. nominal bore

Providing and laying of HDPE pipes confirming to IS: 4984 type PE-80 (6 kg/cm2) including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including necessary excavation and refilling complete in all respects. For irrigation water Supply ( Make - Supreme / Jain irrigation / H & M Piping )

Constructing masonry Chamber 30X30X50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 Cement : 4 Coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1 Cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: (Make - Fabricated at site )

With F.P.S. bricks crushed

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: (Make - Fabricated at site )

With F.P.S. bricks crushed

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: (Make - Fabricated at site )

With F.P.S. bricks crushed

SOLAR PANELS ( Make - MAK V / Netsol Water Solution / Grey Water Solution ) Supply, installation, testing & commissioning of Solar Water Heating System of 1 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm,, Laser welded . with necessary Stands, Support etc. with 100 Ltrs capacity SS -304 hot water storage tank of thickness 0.8 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 1 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved)

FIRE FIGHTING WORKS ............................................... Providing, laying, jointing and testing of following sizes of pipes conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, flanges, rubber gaskets, nuts bolts, washer. And fixing the pipe on floor / wall /ceiling with suitable size clamps, hangers, structural steel supports as per specification. And G.I. pipe sleeve to be provided wherever the pipes are crossing the walls/floors and sealing the sleeves as per consultants requirements including cutting holes and chases in brick, R.C.C work and making good the same to original conditions complete in all respects. Pipe shall be MS black as per IS-1239 heavy grade and fitting for 40 mm and below be of screwed fittings and above BW 'C' class fittings (Make- Jindal, Parkash Surya, Tata)

25 mm dia

150 mm dia

Providing two coats of synthetic enamel paint of approved shade over a coat of primer. Including painting of legends both direction arrow as per the approval of the architects / consultants. (Make- Asian, Berger, Nerolac)

25 mm dia

150 mm dia

Providing, laying, jointing and testing in trenches the following sizes of M.S. class `C' (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, G.I. nuts, bolts and washers and providing 150mm thick fine sand layer all around the pipe, including excavation in all kind of soil/ hard rock, refilling, ramming and removing the excavated surplus material and making good the same complete as required.and providing anti corrosive treatment (coating and wrapping) with 4 mm thick anti corresive tape as per IS :10221 complete as required. (for external works) (Make- Jindal, Parkash Surya, Tata)

80 mm dia

150 mm dia

Providing and fixing gun metal / cast iron gate valve suitable for pressure 15 Kg/Cm2 and confirming to IS: 778 of the following size including providing necessary union / flange. (Make- Castle, AIP, Zoloto)

25 mm dia

Providing & fixing of Cast Iron Lever opreated with S.S. Disc butterfly valve suitable for pressure 15 Kg/Sqcm. with flanges, nut bolts & gaskets complete required. (Make- Castle, AIP, Zoloto)

100 mm dia

150 mm dia

Providing & fixing cast iron Slim seal dual type non-return valves (PN1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer complete as required.etc. of following sizes. (Make- Castle, AIP, Zoloto)

150 mm dia

Providing & fixing Air Cushion tank (Air - vessel) 250 mm dia x 1.0 M high with dished top made of minimum 6 mm thick M.S Sheet pipe/ plate complete with 25 mm dia brass . Air Valve (Ball type) 25 mm dia stopcock. Nipple tees. Elbows and all accessories as required including fixing brackets. (Make- Fire Squard, Exflame, Newage)

Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 15Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. (Make- Fire Squard, Exflame, Newage, Minimax)

100 mm dia

150 mm dia

Providing & fixing swinging type First Aid hose reel in red colour with 36 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required. (Make- Fire Squard, Exflame, Newage, Minimax)

Providing and fixing inlet breeching having C.I. body Two way gun metal 63 mm dia instantaneous inlets conforming to IS 903 fitted with non return valves, 25 mm dia gun metal drain cock, blank cap, brass chains and 150 mm dia flanges with all accessories suitable for local fire tender complete as required in Down Comer Riser (Make- Fire Squard, Exflame, Newage, Minimax)

Providing and laying Cement concrete for anchor / thrust blocks of 1:2:4[1 cement : 2 fine aggregate : 4 coarse aggregate, 20 mm nominal size as per standard design.

Providing and fixing Fire Extinguishers (A, B, C type powder) complete with all accessories as per manufacturers specifications. (Make- Fire Squard, Exflame, Newage, Minimax)

Capacity 4 Kg

Capacity 6 Kg

Capacity 9 Kg

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-14 / sq. cm. (Make- Fire Squard, Exflame, Newage, Minimax)

Providing and fixing C.I. 'POT' strainer with bronze perforated sheet basket tested to a pressure of 15 Kg/sqcm including rubber gasket, flanges, nuts, bolts and washers, complete as required. (Make- Fire Squard, Exflame, Newage, Minimax)

150 mm dia

Providing and fixing suction & delivery headers of required length fabricated from 6mm thick M.S. rolled and welded pipe suitable for 15 Kg/Sqcm working pressure with end flange connections having inlet&outlet flanged connections as per drawing. 150 mm dia pressure gauge with stop cock. Including supports from wall, floors & ceiling complete as required. (Make- Jindal, Parkash Surya, Tata)

100 mm dia

150 mm dia

Common base plate for (a) and (b) from M.S. channel as required size.

Suitable cement concrete foundation with cement concrete plaster complete with antivibration arrangement of cushy foot mountings. Antivibration pad will be fabricated with MS Angle iron minimum 40x40x6 mm . (Make- Kirloskar, Lubi, Wilo, Grundfoss)

Providing, fixing, testing and commissioning of pressure vessel (450 mm dia & 2000 mm height) for pressurization of fire system complete with pressure switches with isolation valves, pressure gauge with isolation valve, valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required. (Make- Local as per approved manufacturer)

M/s Jalbir

SHARAT PURI CONTRACTORS

A L NATNOO