SPECIAL REPAIRS (BLDG) BLDG NO P 2(01 TO 08 ) OR MD ACCN AT MEANEE LINE MEG AND CENTRE UNDER GE(N) BANGALORE

Amount

Demolition of cement concrete and paving not exc 15 cm thick including tiling in ground/first floor etc complete all as directed .

Demolition reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbishh off the the premises complete all as directed .

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as directed .

Non'-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6. over and including 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as levelling concrete complete all as directed .

Matt finish ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.11Sqm but n.exc 0.18Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 over and including 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as levelling concrete complete all as directed .

Glazed ceramic tiles in vertical surfaces 300 x 450x 7-8 mm thick / 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as directed.

Demolition of brick work /stone masonry built in cement mortar of any description complete all as directed.

Brick work with sub class B bricks straight or curved on plan to any radius in half brick wall built in CM 1:4 complete all as directed.

Precast cement block masonry with solid blocks grade C-5 ,exc 10cm in width and setting in cement mortar 1:6 complete all as directed.

Taking down cement plaster on brick/ stone/ concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete all as directed.

Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as directed.

Rendering 5 mm thick on surface of concrete ceiling in CM 1:4 finished even and smooth with out using extra cement complete all as directed.

Cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floor filling cement complete all as directed.

Rendring 10 mm thick in CM 1:3 including using cebex 100 (FOSROC) (or equivalent of Sika/Pedelite/STP) as per manufatures instructions finished surface even and smooth with using extra cement in sunken floor complete all as directed.

Applying a coat of brush bond RFX (FOSROC) (or equivalent of Sika/Pedelite/STP) on plastered surface complete all as directed.

Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer on walls including in narrow width bands cornice spinsters etc complete all as directed.

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 complete all as directed.

All as per item No.19 above but exc 1.5 sqm and n exc 4 sqm each complete all as directed.

Taking down shutter only of any description exc 1 sqm but n exc 2 sqm each complete all as directed.

Taking down and refixing of shutters of any description exc 1 sqm and n exc 2 sqm each in same opening after necessary repairs complete all as directed.

Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as directed.

Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as directed.

Door bottom sweep,rain drip nylon brush with alluminium casing fixed by screws to door shutter to arrest insects, moisture etc complete all as directed

Factory made 35 mm thick 2nd class hard wood shutters of plain framed, paneled shutter (two panel) with lock rail and panel of 9mm thick commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated complete all as directed.

35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a);and fitted to chowkats complete all as directed.

Mild steel tower bolts 150 mm long stove enameled black with bright bolt complete all as directed.

Mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as directed.

Butt hinges MS 100 mm cold rolled mild steel powder coated complete all as directed

MS Pressed handle 150mm size oval type stove enameled black complete all as directed.

Cutting holes in brick walls (depth of embedded portion of hold fast exc half brick and n exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as required complete all as directed.

Steel window with box type frame(80x60x12.5mm profile sheet for frame) with box type shutter inside glazed shutter and outside gauged shutter with steel handle, telescopic pegs stay complete with glazing bars and 08 nos of 10x10 mm square guard bars in equal spacing, dovetailed or welded as per TD Drg no 539 of HQ CE Chennai Zone including one coat of red oxide primer complete all as directed. Note: PCC in frame, glass pane and wire mesh shall be measured and paid seperately

Steel ventilator with top hung shutter(half fixed) including hinges, steel peg stay, complete with glazing bars and 10 x 10 mm square guard bars in equal spacing, devoited or welded incl one coat of red oxide primer complete all as directed. Note: PCC in frame, glass pane and wire mesh shall be measured and paid seperately

Pin headed glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

3mm thick sheet glass ordinary quality and glazing with putty/beading in squares not exc 0.50 Sqm in each pane complete all as directed.

Galvanized mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18mm and fixed with tinned tack or galvanized steel wire staples complete all as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 and fixed with stainless steel wire staples complete all as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as directed.

Factory made solid PVC moulded door shutter 28-30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, fixing in frame at site complete all as directed.

150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

Aluminium anodised Butt hinges 100 mm long complete all as directed

125mm size aluminium handles, cast type, anodised, complete all as directed.

Tubular towel rail, 20mm dia, D ttpe, 60cm long between flanges of brass chromium plated as in repairs complete all as directed.

Hat and coat hooks, solid body, 175mm to 250mm made of brass complete all as directed.

Kitchen sink made of stainless steel 1mm thick with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mmx 330mm x 160mm including PVC waste pipe 32/40mm dia and 1200mm long complete all as directed. Make:- Nirali/Anupam/Prayag

Looking mirror with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed. Make: Cat part no BLM-01 of Prayag or eqivalent of Jaquar/Hindware/Cera

preparation of old painted surfaces of wood or wood based material over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome over 10cm width or girth complete all as directed.

RCC (1:2:4 ) type B 1 using 20 mm graded crushed stone aggregate as in slab supported on walls.etc as in cooking plat form complete all as directed.

TMT bars 10mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed.

Rotational moulded polyethylene water storage tanks (three layer) (cylindrical vertical with closed top) hoisted and fixed in positions all as specified in SSR Part-I, capacity of tank 500 liters fixed in repairs, complete all as directed.

Disconnecting existing tanks setting aside(or lowering if required) for repairs cleaning etc and hoisting if required connecting and refixing in position cleaning repairing etc cleaning and removing all scale and dirty etc from tanks and mouths of circulating pipes.(exc 250 and not exc 500 ltr) complete all as directed.

Demolition of existing roof treatment of any type including cement plaster 10 mm thick and PCC 25mm thick, providing screed bed/rendering 10mm thick in CM (1:4) mixed with and including supply of approved water proofing compound as per manufacturers instructions, removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and providing 50mm x 50mm coving at the corners with PMC mortar as above, applying prime coat with anti root primer, Shali prime WP WB @ 400gm/Sqm, first coat of water based Uv resistent elastomeric modified PU liquide membrane, Shaliurethane(R) BTD of STP @ 1 Kg/ Sqm, spreading the fibre glass net of 45 gsm over the entire area, second coat of Shaliurathene(R) BTD of STP @ 1 Kg/ Sqm for elastomeric seamless water proof membrane in two coats to a final DFT of 1.5mm thick having an elogation capacity of over 500% which conforms to ASTM C 836 and ASTM D 6083, complete all as directed. Make of water proofing chemicals :- STP or equivalent of Sika/Pedelite/Fosroc

Complete removal of existing treatment on walls preparing the surface and applying two coat of oil bound distemper over a coat of alkali resistant primer including in narrow width bands cornice spinsters etc complete all as directed.

Forming jambs etc to openings (to fore going item) incl toothing and properly bonding into old brick work also facing jointing and pinning to mstch existing work completion cm 1:6 complete all as directed.

Preparation of new plastered surface on ceiling and applying three coats of white wash complete all as directed.

Complete removal of existing treatment on walls and applying two coat of cement based paint over a coat of primer including in narrow width bands cornice spinsters etc complete all as directed.

Soap dish fancy type of brass CP complete all as directed. Make: Cat part no BA-25 of Prayag or eqivalent of Jaquar/Hindware/Cera

Bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore (ISI marked) fixed in repairs, complete all as directed. Make: PIS-08H of Prayag or eqivalent of Jaquar/Hindware/Essco

PVC connections 15 mm size with PTMT nuts of length 600mm fixed in repairs complete all as directed.

Stop valve fancy type cast copper alloy chromium plated screwed down, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed in repairs, complete all as directed. Make: Cat part no PIS-18H of Prayag or eqivalent of Jaquar/Hindware/Essco

Angle valve 15 mm bore casr copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed in repair complete all as directed. Make: PIS-10H of Prayag or eqivalent of Jaquar/Hindware/Essco

Bib cock 2 way double handle with flange 15 mm bore cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repair complete all as directed. Make: Cat no PIS-12H of Prayag or eqivalent of Jaquar/Hindware/Essco

CP health faucet for pedestal patern water closet with CP flexible pipe length 900mm fixed in repairs, complete all as directed. Make: BEA-85 of Prayag or eqivalent of Jaquar/Hindware/Essco

Vitreous china wash basin white flat back size550x400mm excluding chain and plug and porcelain stopper but including CI bracket. PTMT waste coupling and PVC waste pipe 32/40mm dia and 1200mm long and 15mm dia PVC connection icluding Pillars taps fancy type cast copper alloy chromium plated, screwed down,high pressure(Make: PIS-14H of Prayag or eqivalent of Jaquar/Hindware/Essco) with long screwed shanks screwed for iron pipe or for brass ferrule and fixed 15mm dia as in repairs complete all as directed.

Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe ) and trap , including connection to drain (or out going pipe) and to flushing pipe , anti syphonage pipe ,etc and plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as directed.

Grating doom 125/75 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as directed.

Shower rose 15 mm brass CP 100 mm dia of round or square with shower arm complete all as directed. Make: BEA-85 of Prayag or eqivalent of Jaquar/Hindware/Essco

Taking up or down steel tubing 15mm dia and connections complete all as directed.

Taking up or down steel tubing 20 mm dia and connections including cleaning for refixing or removal to store complete all as directed.

Fixing only 20 mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc

16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as directed.

20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as directed.

Stainless steel plate rack(minimum 0.6 mm thick ) of size 31x36x10 inches for utensils as in repairs complete all as directed. Make:Cat Part No P-348 of Prayag or equivalent of Shakti/Polytub

Drapery rod og high strength aluminium rod powder coated thickness 40-60 micron of outer dia 26 mm & inner dia 24.5 mm with providing 2 nos brackets (projected type/wall to wall) and finials all as directed. Make: MAC-SLEEK LINE TYPE-II / VISTA LEVOLAR SOFFIO-II

Framed work such as grills,gratings, etc with ends of bars shouldered and /or revited or forged into spikes,framed guard bars,barred iron doors,ladders,framed ballusters,walk ways railings,frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as directed.

Taking down PVC (SWR) pipes 110mm dia complete all as directed.

Taking down PVC (SWR) pipes 75mm dia complete all as directed.

110mm bore PVC SWR pipe single socket in any length with rubber ring joints fixed to wall complete all as directed.

110mm bore PVC SWR pipe single socket in any length with rubber ring joints laid in trenches or in floors complete all as directed.

75mm bore PVC SWR pipe single socket in any length with rubber ring joints fixed to wall complete all as directed.

75mm bore PVC SWR pipe single socket in any length with rubber ring joints laid in trenches or in floors complete all as directed.

110 bore PVC (SWR) vent cowl complete all as directed.

75mm bore PVC (SWR) bends with access door complete all as directed.

110mm bore PVC (SWR) bends with access door complete all as directed.

110 mm bore PVC (SWR) branch piece (double Y) equal or unequal with access door complete all as directed.

110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as directed.

PVC (SWR) multi floor trap 75mm dia with grating including joint with solvent cement complete all as directed.

Galvanised iron pipes medium grade with all required necessary fittings and fixed complete to walls and ceilings or laid in floors of 25 mm dia complete all as directed

Gun metal gate valve with iron wheel head ISI Marked screwed both ends complete for 25 mm dia iron pipes as in repairs complete all as directed

Hard core of gauge n exc 63mm deposited spread and levelled in layaers n exc 150cm thick , watered rammed to a true surface complete all as directed.

75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection including forming groove 10 mm wide & 30 mm deep & filled with bituminous filler complete all as directed .

PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base 75 mm thick complete all as directed

Chequered cement concrete tiles 30 cmX30 cmX25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigments and over and including15mm thick screed bed in CM 1:6 complete all as directed.

20mm thick Machine cut Granite (Table rubbed, mirror polished) tiles , with edge rounded one side laid over 15mm thick cement mortar 1:4 screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as directed.

Machine cut kota stone slab in flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab over and including 20 mm thick screed bed of CM 1:4 including rubbing and polishimg complete all as directed.

Machine cut kota stone slab in riser of steps, skirting, dado or pillar, 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab over and including 20 mm thick screed bed of CM 1:4 including rubbing and polishimg complete all as directed.

Rounding to edges of stone slabs on one edge such as in steps including making grooves 2 nos (parallel to tread) rubbing and polishing complete all as directed.

Flush pointing to squared rubble masonary coursed or uncoursed in CM 1:3 mixed with WPC including raking out joints complete all as directed. Note: WPC shall be measured and paid seperately

PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coving over chajja complete all as directed

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as directed.

Point wiring, concealed by using 1.5 sqmm PVC insulated unsheathed, FRLS, copper conductor multistrand drawn in suitable sunken box and frame cover plate for mounting of modular switches/ sockets as required at site and provn of PVC rigid non metallic conduit medium density ISI marked fixed with all fittings and all accessories compete for one light/ fan/bell point controlled by one switch including provision of 1.5 sqmm PVC insulated, FRLS copper conductor continuos earth wire connected to common earth dolly complete all as directed. Note : MS sunken boxes, cover plates with frame switches, sockets shall be measured and paid seperately in an appropriate item of Sch 'A' and laying/ fixing of sunken box and cover with frame is included in quoted rate.

One Light point controlled by one switch

One Fan point controlled by one switch

One Bell point controlled by one switch

One light point controlled by two two way switches

One 3 pin socket out let 5 Amps on independent board

One 3 pin socket out let 5 A on same board with other switches.

All as per item No.103 above but with 2.5 Sqmm cable for one 6 pin 15A socket outlet point on independent board complete all as directed.

Note for Item No 103 & 104 (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box and laminated sheet in the item rate quoted for point wiring.

Switch Modular type 6A one way, 1 module complete all as directed.

Switch Modular type 6A two way, 1 module complete all as directed.

Bell push modular type 5A one way complete all as directed.

Switch Socket outlet modular type 2/3 pin (6 amp)combined 3 module complete all as directed.

Socket outlet 6/16Amps modular type combined 2 module complete all as directed.

Switch Modular type 15A , 1 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 1 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 2 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 3 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 6 module complete all as directed.

Angle holder PVC/polycarbonate with back plate suitable for batten fittings complete all as directed.

Buzzer, Ding dong AC, 230 volts, single pole complete all as directed.

Ceiling rose surface type Bakelite of size 65 x 50 mm, 2 to 3 terminals complete all as directed

Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories including taking down the old submain wiring complete all as directed

LED batten fitting 4 feet suitable for indoor application of system wattage 18 /20 watt , CCT 6500 K , Luminous efficacy 100 Lm /watt , PF > 0.9 etc including electrical connecion from ceiling rose with 3 core 1.0 sqmm sheathed wire all as directed.Make & Model No: Wipro Cat part No: LL20 -221- XXX- 65 NE or Cat part no 830203 4 ft of Bajaj or equivallant of Philips / Havells/Polycab

LED batten fitting 2 feet suitable for indoor application of system wattage 10 watt , CCT 6500 K , Luminous efficacy 100 Lm /watt , PF > 0.9 etc including electrical connecion from ceiling rose with 3 core 1.0 sqmm sheathed wire all as directed.Make & Model No: Wipro Cat part No: LL20 -221- XXX- 65 NE or Cat part no 830203 2 ft of Bajaj or equivalent makes in Philips / Havells

LED Bulding security light of protection IP -66 , system wattage 25 Watt , CCT -5700 K , PF >0.9, etc complete including GI bracket of 1 mtr length and suitable size(25 /40) bend to shape fitted at pole / building including connection with sheathed cable of 2.5 sqmm 3 core complete all as directed. Make & Model No: Wipro Cat part No: LR-02-291-XXX -57-XX or equivalent makes in Philips / Havells

LED lamp of 9 watt suitable to fit in angle holder .Make:- Wipro/Philips/ Bajaj

Vertical DB VTPN with MCCB as incomer 4 ways double door with provision for TP MCCB ( 125 A in 16 KA as incomer, IP 43 protection ,conforming to IS-13032, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides in repairs complete all as directed Make:INDOASIAN OPTIPRO Cat No.811888 or its equivalents makes in Standard / Legrand/ L &T

MCB DB SPN 8 way, double door,with 200 amps rated busbar 240 V, AC, 50 Hz, IP-43 protection conforming to IS-13032, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides as in repairs complete all as directed Make :- Indo Asian Optipro Cat No.811807 or its equivalent in standard/Legrand /L&T .

MCB SPN 32-40 amps C-curve complete all as directed

MCB single pole 240 volts 5 to 40 Amps (Curve-C) complete all as directed. Note : Rating of MCB shall be decided by Engr-in-charge.

Exhaust fan metal body 225 mm sweep with louvers of 1400 RPM connected to the ceiling rose with 3 core sheathed cable of 1.5 sqmm includind cutting and finishing the existing stone wall complete all as directed. Make: Freeshee MK-III of Bajaj or equivalent of Crompton/Havells

Taking down the existing ceiling fans 1200mm sweep from its position by duly disconnecting electric wire & refixing the same in original position & connecting the electric lines after the painting of ceiling fan with synthetic enamel white paint by spraying including filling cavities with filler coat after cleaning the all dust complete all as directed

Stepped type electronic fan regulator modular type, complete all as directed

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as directed.

Removing the existing single phase energy meter carefully by disconnecting all the electrical connection ,removing the wooden board and refixing the the same at the location including new provision of new industrial laminated sheet of 5 mm thick , fixing of meter over the sheet etc complete all as directed

S L R Construction

Shanthi Construction