Refurbishment and fire safety with allied electrical works and office setup at Dy. Ch. E. (MnE) SWD projects Worli.

Amount

100/125 Amp. 415V TPN Switchfuse unit with CRCA sheet steel powder coated enclosure with HRC fuses & switch links.

100 /125A TPN with tinned copper bars of size 20 x 5 mm.

3 Noss. single core Cu PVC insulated flexible cable of 50 Sq.mm. for phases & 1 single core Cu PVC insulated flexible cable for Neutral of 25 Sq.mm for 100/125 Amp. TPNSS switch.

IP 42 Wall/column Mounted distribution board with one Nos of 63A 4P MCB and 2 Noss 32A TP MCB / 6 Noss. 32A SP MCB as outgoing (4 way TPN DB)

IP 42 Wall/column Mounted distribution board with one Nos of DP 16/32A MCB as incomer and 4 Noss 6A/10A SP MCB as outgoing (8 way SPN DB)

32 Amp. 415V TPN Switchfuse unit with CRCA sheet steel powder coated enclosure with rewirable fuses

32 Amp. 240V DP Switchfuse unit with CRCA sheet steel powder coated enclosure with rewirable fuses

30/32 Amp. 230V DP Changeover Switch with CRCA sheet steel powder coated enclosure.

60 /63A TPN with tinned copper bars of size 20 x 3 mm.

3- Ph DOL Starter for 7.5 HP

32A SP MCB

ELCB with 100mA Sensitivity 40Amp. 4Pole

ELCB with 100mA Sensitivity 40Amp. 2Pole

Supply and fixing 12 mm thick Marine Ply Plank

50 x 50 x 6 mm of M.S.angle.

1 st category Al armoured cables FRLS outer sheathed- 2C x 10 Sq.mm

1 st category Al r armoured cables FRLS outer sheathed- 4C x 16 Sq.mm

1 st category Al armoured cables FRLS outer sheathed- 2C x 4.0 Sq.mm

Cable End Termination For Aluminium Cables – 2C x 10 Sq.mm

Cable End Termination For Aluminium Cables – 4C x 16 Sq.mm

Cable End Termination For Aluminium Cables – 2C x 2.5/4 Sq.mm

G.I. Cable tray with all other accessories 100 x 25mm (W x H) - (16 SWG - 1.6mm) without cover

Supply and laying Raceways / Conduits 100mm X 40mm Aluminium raceways, 2 mm thick.

Light /Fan / Ex. fan Points Concealed Manner with Modular switches & FRLSH wires

3/5 Pin Independent Plug (IP) Concealed Manner with Modular switches & FRLSH wires

5A/6A - 3/5 Half Plug Concealed Manner with Modular switches & FRLSH wires

Bell Point with Bell / Buzzer & 1 Bell Push Concealed Manner with Modular switches & FRLSH wires

15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch

Wiring for submains- medium class PVC- 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20mm Conduit

Ceiling fan of 1200 mm sweep with all accessories including Electronic Regulator for completing installation

Fan safety rope/ Fan wire.

S' type M.S. fan hook fabricated from suitable dia. M.S. rod for fixing ceiling fan by using pair of Anchor fastener.

Fixing of Ceiling fans Upto 0.5 Mtr

Exhaust fan of 230mm sweep, 1400RPM, with 450 CFM free air delivery, AC 230V/415V , 50 Hz, single phase / three phase complete with all necessary accessories for completing installation .

Pedestal fan of 450mm sweep, 230 Volts,AC 50 Hz, oscillating

type complete with guard and regulator 3 mtrs. of 3 core

1.5sqmm, PVC insulated , copper conductor , flexible wire and

Hand shield type 3 pin plug top.

50mm x 50mm x 50mm size GI Junction box with kNosck out & 10Amp. Connector block /strip

INDOOR LED FIXTURES - -LED Square Recessed Downlighter?18-20W

LED Tubelight fixtures 1X 18W

LED Spot Light

Switch BOX point for computers through PVC Conduit Description of Item 8Modular SURFACE BOX - 1 No. 8Modular PLATE - 1 No. INDICATOR LAMP - 1 No. 15A SWITCH - 1 No. 6A 5 PIN SOCKET - 3 Nos. 2Modular SURFACE BOX - 1 Nos. 2M PLATE - 1Nos. RJ11 SOCKET - 1 Nos. RJ45 SOCKET - 1Nos.

Earthing Continuity Conductors -Bare G.I. Conductor size 8 SWG

Earthing Continuity Conductors -25 x 3mm GI

Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip/ / 2X8SWG G.I. wire up to chamber (wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope

Monoblock pumpsets: 7.5 H. P. three phase motor, with head of (16-27 mtr.) giving discharge of (22.5 – 10.31 lps) (100 x 75 mm). Pump body: Cast Iron, Impeller: Cast Iron, Shaft SS410

Cement concrete foundation using M-20 cement concrete mix with J shaped foundation bolts where required

SUPPLYING & LAYING 'C' CLASS G.I. PIPE (I.S.I MARK) FOR SUCTION / DELIVERY LINE ETC.: 40 mm dia.

SUPPLYING & FIXING VALVES: GUN METAL FOOT VALVE (SPRING LOADED): 38/40 mm dia.

GUN METAL NON - RETURN VALVE:(FLANGED):- 40 mm dia.

GUN METAL GATE VALVES (FLANGED): -40 mm dia.

Automatic pump control panel

PVC box & cover plate with RJ-45 for LAN access only

PVC box & cover plate with RJ-11 for Telephone access only

SITC of EPABX 6 x 24 P&T (6 TRUNK / 2 DIGITAL / 24 SLT) EXPANDABLE UPTO 48 EXT)

20 pair M.S.Junction Box for EPABX

50 pair M.S.Junction Box for EPABX

25 mm.- Only PVC Conduits

SITC of Push button telephone instrument desk top/ wall mount unit

PVC Telephone Cable -2 pair

PVC Telephone Cable -20 pair

Cat 6 Gigabyte

SITC of 19 inch Rack

Supply, Installation,Testing & Commissioning of IP Dome camera with 1/2.8" CMOS, Progressive Scan, HD 720P Horizontal Resolution, Dual H.264 streaming, 25 FPS, 2.8mm- 10mm varifocal auto iris lens, 0.01 lux,Tamper detection,Wide dynamic Range, 3D Noise reduction, PoE & standard 12VDC/24VAC power input, Indoor surface mount enclosure, Mounted on True Ceiling / False ceiling as per site requirement (including required accessories), UL Listed Or Equivalent. Camera Shall be ONVIF compliant.

Supply, Installation,Testing & Commissioning of IP Fixed Box/ Bullet camera with 1/2.8" CMOS, Progressive Scan, Day/Night, HD720P Horizontal Resolution , Dual H.264streaming, 25 FPS, 2.8mm-10mm varifocal auto iris IRcorrected megapixel lens, 0.05 lux Day/Night, Tamper detection, Wide dynamic Range, 3D Noise reduction, PoE & standard 12VDC/24VAC power input, IP66 rated vandal resistant enclosure, UL Listed Or Equivalent. Camera Shall be ONVIF compliant.

Design, Supply, testing, installation and commissioning of modular 16 channel 1080P NVR, Recording: 1920X1080P, 15 FPS, 30 days recording, 24 hours/day; Real time monitoring with 25 FPS. Hard disc : 8 SATA III Ports, Each 6TB , up to 48TB, 1 eSATA port, Disk array: Support RAID 0/1/5/6/10,Two no’s of RJ -45 10/100/1000 Mbps self adaptive Ethernet interface, RS 232, RS 485, keyboard interfaces, VGA/HDMI compatible, 2nos front USB 2.0 & 1 no at rear USB 2.0 compatible & 8 TB hard disc and as per storage configuration contractor shall consider the separate hard discs

Supply, Installation, Testing & commissioning of 42inches LED monitor, Full HD Resolution, Backlight LED, Brightness : 400 NITS min., Contrast : 1200 : 1 or better., Power supply : 230 ±10%, 50 Hz.

Supply & inst of 18.5" LED Monitor

SITC of 8TB Storage (HDD)

Supply & installation of 6W/100V wall mounting box speakers.

Wiring for speakers with 24/0.2 multicore twin twisted flexible copper.

Supply and installation of Booster amplifier 300W with all accessories.

Supplying, erecting, testing and commissioning of 2 zone conventional fire alarm control panel. Surface mounting with 2 detection zones & sounder outputs.

Supply, Installation, testing & commissioning of conventional Heat detector complete on box as per specification

Supply, Installation, testing & commissioning of conventional optical type smoke detector complete on box as per Specification

Supply, Installation, testing & commissioning of conventional Manual Call Point (Pill box) with break glass push button in metal enclosure complete with back mounting box.

Supply, Installation, testing & commissioning of conventional Hooters with CRCA enclosure complete with external power supply & junction boxes

Supplying and erecting FRLS armoured cable 4 core 1.5 sq.mm. copper complete erected on wall/ceiling/trusses as per specification

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on Wall.

Supplying and erecting CO2 Fire Extinguisher 4.5 kg

Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.

SITC of Auto glow signage for Staircase direction

Removal of Existing plaster and Transportation of Debris

Application Of Plaster: 12 mm thick plaster with water proofing chemicals on all 4 walls of the store room

Granite Cladding on Kitchen Platform: Providing and laying 12 mm thick, approved shade granite light and dark slabs as per approved design on existing kitchen platform, skirting on platform's exterior edge, leg partition of platform and shelves.

100mm Thick Wall Partition in Plywood with Veneer Lamination: Wall Partition 100mm thick to be fabricated with Sal Wood Framing and on both 10mm thick Plywood with 4mm thick Veneer laminate from floor level upto 2.4m height. 4mm Veneer laminate to have 10mm groove pattern

MINGLE MODULAR PLT 1800W ST-1800 X 850 X 740

Accoustical Doors for Conference Room: Description: The wooden acoustic door will be with door frame and shutter, Single / Double leaf with Sound Transmission Class (STC) from 35 to 50 STC depending upto thickness of door panel.

Exterior Doors Replacement with New Door with Veneer Lamination and acoustical installations. 35mm thick Ply Doors:

Wall Paneling in Plywood with laminate of Veneer upto full height of 2.6 Mtr. along on entire periphery of Conference & Control Room Supply & installation of 4 mm thick Veneer paneling of Approved Shade & Texture.

La sede high back- seat/back assembly: the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3.

MARVEL HIGH BACK:- The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression

MARVEL MID BACK:- The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.

Floor Tile: Providing & laying anti-skid vitrified tiles on flooring of 300mm x 300mm (without warpage), of approved make and colour in flooring in required position including laying with tile adhesive, filling joints with approved grouts pigmented to match the shade of the tiles, curing, and cleaning etc. complete as directed by the Engineer.

Gypsum Ceiling: Providing and fixing suspended minimum 12.5mm thick tapered edge plain fire resistant gypsum board having density minimum 790 kg/m3 (conforming to IS 2095- Part 1:2011, certified board)

Providing and fixing of floor tiles and wall tiles with sand, cement and labour.

Making of brickwall.

Providing and installing crystalline waterproofing treatment to inside surfaces of the water retaining structures

Extra rate for removing brick bat coba more than (4") 100 mm thick including carting away the same and from the actual place of work to any other site and making the site clear as directed. The debris will become contractor's property.

Extra for providing additional thickness of brickbats over 100 mm in 1:5 c.s. either due to location of rain water pipes or due to increase in the travel length of flow of rain water or brick bats required in the sunk portion of baths, W.C.s nahani etc. The rate includes for fixing brickbats in C.M., with waterproofing compound as per specification

Mid Back seating

ROLLER BLINDS - MICRO AERATED

Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent)for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete. 2400 X 900 X 750

Supply and instalaation of Demountable Modular Aluminium Frame Glass Partition, Singlre glazed system compromising of 10mm Toughnend Glass and Aluminium profile Sections of size75MM x 30MM for fixing at Floor level and at false ceiling level with approximate brackets and expansion bolts of standardised S.S. Finish. All Hardware made of standardised S.S. finish etc. complete. The Profile features and double sided adhesive tape guarantees perfect structural union and sound insulation. Finishes exposed aluminium sections are anodized aluminium finish with 6463 T6 Grade. The Quantity for this item will be theglass panel of height 2100MM only.

Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion madewith foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and coveredwith foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc.complete. 2 seate

Fire rated Double leaf Door - Laminate Finish: Providing & Fixing

Making of staircase with M.s Frame replacement

Sofa 2 seater.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250mm.

P/F Jaguar make shower , necessary accessories shower arm with flange continental series sr.no.483

Providing and fixing JAQUAR NAKE, ORNAMIX Model No. 10011 single lever Basin Mixer without POPUP waste with 450mm long copper pipes & brass nuts etc complete

Supply of sink mixer- jaguar note:- J shape spout with wall flange of heavy duty jaguar make (wall mounted ). (Sink) cock with J shape spout Cat NO. FLR-5309N OR Consider equivalent make)

Proving & fixing in position Jaguar continental' make CP Jet spray with flexible CP supply pipe and KL OTHER

Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap.

White glazed fire clay kitchen sink of size 600x450x250 mm.

32 mm dia ,Semi rigid pipe

40 mm dia

Flexible pipe

40 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450mm dia.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia. Pipe

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4, U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. PN - 16 Pipe, 16 mm OD

PN - 16 Pipe, 20 mm OD

PN - 16 Pipe, 25 mm OD

PN - 16 Pipe, 32 mm OD

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore

ROLLER BLINDS - MICRO AERATED

Making of security cabin shed

Galvanised iron sheet 1 mm (20 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth upto 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3 mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed.

Changing of gutter covers,Rectangular shape 600x450 mm internal dimensions

Painting of ceiling, beam & walls

Providing wax polishing to floors and dado, preparing the surface scaffolding etc. complete

Providing and applying first single coat of approved primer and two coats of waterproof cement paint of an approved make and colour as per manufacturers specifications to any surface, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge.

Providing anti termite treatment conforming to IS- 6313 (part-III) to the wooden frames of doors / windows of the Existing building by drilling the 3 mm dia. holes at 150mm c/c and at the junction of wood work and masonry work to downward angle of 45 degree and injecting 500 ml per hole or until refusal with oil / kerosene based chloropyrifos EC 20 emulsion or equivalent of 1% concentrate, sealing the holes by filling the putty etc complete as directed by Engineer-In-Charge with 2 years guaranty

Staricase lobby painting ultima protect.

Rebate

CHAITRA ELECTRICALS AND ENGINEERING

Sai Electricals and Engineers