Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹58.7 LAccepted-AOC MAHARASHTRA | KOLHAPUR | MAHARASHTRA | 415101 | ₹58.7 L | L1 | Accepted-AOC AS PER BOQ SUMMARY |
| 2 | L2₹58.8 LRejected-AOC | ₹58.8 L | L2 | Rejected-AOC AS PER BOQ SUMMARY |
| 3 | L3₹59.9 LRejected-AOC | ₹59.9 L | L3 | Rejected-AOC AS PER BOQ SUMMARY |
Tender Value
₹58.8 L
EMD Value
₹58,797
Closing Date
15 Jan 2026, 6:00 pmClosed
Executive Engineer Works Dept ZP Parbhani
Works Dept ZP Parbhani
Providing Electrical Installation, Street Light in Premises and fire Fighting for Newly Constructed Staff Quarters Panchayat Samiti Building at Gangakhed. TQ Gangakhed and Dist. Parbhani.
2026_PARBH_1267527_1
ZPPBN/WD/eTENDER/424/25-26
Open Tender
Electrical Works
180 days
TQ Gangakhed and Dist. Parbhani.
Please refer Tender documents.
2 documents required · 2 mandatory
₹23,600
₹58,797
23 Feb 2026
8 Jan 2026
16 Jan 2026
8 Jan 2026
15 Jan 2026
8 Jan 2026
Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit . DSR I.No. 1.2.1 (new) [PART A]
Supplying and erecting HMS PVC conduit 25 mm dia.with PVC accessories on wall /ceiling as per specification No: WGMA/ CON, para no. 1.1.1. DSR I.No. 1.2.7. [PART A]
Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. DSR I.No. 1.2.8.[PART A]
Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. DSR I.No. 1.2.9. [PART A]
Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW. DSR I.No. 1.3.1 [PART A]
Supplying & erecting green earth wire 1 x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW. DSR I.No. 1.3.1 [PART A]
Supplying and erecting mains with 1 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. DSR I.no. 1.3.2. [PART A]
Supplying and erecting mains with 1 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. DSR I.no. 1.3.2. [PART A]
Supplying & erecting mains with 1 x 4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW. DSR I.No. 1.3.3. [PART A]
Supplying & erecting mains with 2 x 4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW. DSR I.No. 1.3.3. [PART A]
Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. DSR I.No. 1.3.4. [PART A]
Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. DSR I.No. 1.3.4. [PART A]
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. DSR I.no. 1.6.1. [PART A]
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. DSR I.no. 1.6.2. [PART A]
Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. DSR I.No. 1.6.8.
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete . DSR I.No. 1.6.10 [PART A]
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. DSR I.No. 1.6.11. [PART A]
Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. DSR I.no. 1.6.23. [PART A]
Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected. DSR I.No. 1.6.27. [PART A]
Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected. DSR I.No. 1.6.30 [PART A]
Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected. DSR I.No. 1.6.32 [PART A]
Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected. DSR I.No. 1.6.43 [PART A]
Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/ CW DSR I.No. 1.7.26[PART A]
Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW. DSR I.No. 1.7.19 [PART A]
Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing andrequired accessories as per specification No: WG-PW/SW. DSR I.No. 1.7.20 (NEW) [PART A]
Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty. DSR. I.No. 2.1.15. [PART A]
Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. DSR I.No. 2.1.18 [PART A]
Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size. DSR I.No. 2.3.13. [PART A]
Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. DSR I.No. 2.4.6. [PART A]
Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG- KT/WB. DSR I.No. 2.7.4. [PART A]
Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. DSR I.No. 2.10.14 [PART A]
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF DSR I.No. 2.10.22. [PART A]
Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. DSR I.No. 2.11.4. [PART A]
Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. DSR I.No. 2.11.6 [PART A]
Supplying and erecting storage type water heater 35 litres capacity having standing loss <0.511kWh/24hour/45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank, heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal function cut-out, valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. AP-WH/STWH DSR I.No. 3.1.3. [PART A]
Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia). DSR I.No. 3.1.7. [PART A]
Supplying & erecting 15mm brass non return valve for inlet pipe of storage water heater. DSR I.No. 3.1.8. [PART A]
Supplying & erecting dead weight pressure releasing valve for storage water heater with necessary materials complete. DSR I.No. 3.1.9 [PART A]
Supplying & erecting vacuum relief valve for storage water heater with necessary materials complete. DSR I.no. 3.1.10 [PART A]
Providing fiber reinforced PVC flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1 set of 2 nos.) complete. DSR I.no. 3.1.11.[PART A]
Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC dSR I.No. 3.2.11. [PART A]
Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200). DSR I.no. 3.5.1. [PART A]
Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 700VA digital pure sine wave inverter with backup time of ........ hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as per specification no. AP-INV dSR I.No. 3.6.1 [PART A]
Supplying and erecting 12V/100Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete. DSR I.No. 3.8.2. [PART A]
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. DSR I.No. 5.3.2. [PART A]
Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. DSR I.No. 5.3.3. [PART A]
Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. DSR I.No. 5.3.6 [PART A]
Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB. DSR I.No. 5.4.9. [PART A]
Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. DSR I.no. 5.4.13. [PART A]
Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB DSR I.No. 5.6.2 [PART A]
Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. DSR I.No. 6.1.1. [PART A]
Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (Width) X 3 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CPBB. DSR I.No. 6.2.1. [PART A]
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. DSR I.No. 6.1.19 [PART A]
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. DSR I.No. 7.1.6.
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL DSR I.no. 7.1.29 [PART A]
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. DSR I.No. 7.6.9 [PART A]
Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materils, testing & recording the results as per specification no. EA-EP. DSR I.No. 9.1.1. [PART A]
Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. DSR I.no. 9.2.3. [PART A]
MSEDCL service Connection charges
Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (50 no x 0.25 mm dia.) 3 core flexible multi tranded copper Industrial cable for voltage grade up to 1.1 kV. DSR I.No. 1.3.14 [PART B]
Supplying and erecting integrated LED street light fitting 70W - 75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. DSR I.No. 2.4.6. [PART B]
Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. DSR I.No. 5.3.1. [PART B]
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. DSR I.No. 6.1.19 [PART B]
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL DSR I.No. 7.1.27 [PART B]
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. DSR I.No. 7.6.9 [PART B]
Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL DSR I.No. 8.2.13. [PART B]
Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT DSR I.No. 8.2.21 [PART B]
Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT. dSR I.No. 8.2.22. [PART B]
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP. DSR I.No. 9.1.1. [PART B]
Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP. DSR I.No. 9.1.4. [PART B]
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). DSR I.No. 16.3.9. [PART B]
Supplying, erecting testing and commissioning manual call point (Pill box) with break glass, push button (resettable type) in metal enclosure complete as per specification no. FF-FAAS/MCP. DSR I.No. 13.9.6. [PART C]
Supplying, erecting, testing and commissioning hooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete as per specification no. FF-FAAS/HTR. DSR I.No. 13.9.8 [PART C]
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU DSR I.No. 13.9.10 [PART C]
S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. dSR I.No. 13.15.1. [PART C] ⁓⁵⁰⁰⁹…牥捥楴杮䌠牡潢楄硯摩䌨㉏ 楦敲攠瑸湩畧獩敨景㐠㔮欠挠灡捡瑩⁹慣瑲楲杤祴数挠湯潦浲琠卉㈠㜸‸ㄯ㘵㌸挠浯汰瑥牥捥整楷桴渠捥獥慳祲挠慬灭洠摡牦浯㔠‰⁸‶浭⹍匠汦瑡眠瑩畮⁴…潢瑬潲瑵摥椠慷汬挊浯汰瑥䐠剓䤠丮ㄠ⸳⸹㐱嬠䅐呒䌠⁝ă䨀扯/䌀湯牴捡⁴潎›†做䉐⽎䑗支䕔䑎剅 ㈴⼴〲㔲㈭‶†
Please Enable Macros to View BoQ information
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.90 MB
BOQ_2183443.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid