Petty repair to certain building for day to day maint at Mil Stn Kapurthala under GE Kapurthala

Amount

Taking down and refixing of shutter of any description area exceeding 1 Sqm but n exc 2 sqm each, after easing, tightening pins etc to ensure smooth operation of shutter complete all as specified and directed by Eng-in-Charge.

Resecuring or easing and adjustment without taking down the shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Eng-in-Charge.

S&F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width 1.18mm and fixed with tinned tacks of galvanised wire stapple etc wooden/fillets complete all as specified and directed by Eng-in-Charge.

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed by Eng-in-Charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed by Eng-in-Charge.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square exc 0.50 sqm in each pane complete all as specified and directed by Eng-in-Charge.

S&F in repairs MS tower bolt 150mm stove enamelled black with bright bolt and fixed complete all as specified and directed by Eng-in-Charge.

S&F in repairs MS tower bolt 200mm stove enamelled black with bright bolt and fixed complete all as specified and directed by Eng-in-Charge.

S&F in repairs Aluminium tower bolt 150mm with bright bolt and fixed complete all as specified and directed by Eng-in-Charge.

S&F in repairs Aluminium tower bolt 200mm with bright bolt and fixed complete all as specified and directed by Eng-in-Charge.

S&F in repairs MS sliding door bolts of size 250mm plate type stove enamelled black with bright bolt not less than 12mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Eng-in-Charge.

S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Eng-in-Charge.

S&F in repairs 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) welded to steel chowkats complete all as specified and directed by Eng-in-Charge.

S&F in repairs 125mm Aluminium handles, cast type, anodised complete all as specified and directed by Eng-in-Charge.

S&F in repairs 150 mm Aluminium handles, cast type, anodised complete all as specified and directed by Eng-in-Charge.

M&L for mild steel pipe 25 mm dia curtain rod with Powder coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved complete all as specified and directed by Eng-in-Charge.

S&F in repairs 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc complete all as specified and directed by Eng-in-Charge.

S&F in repairs 6 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc complete all as specified and directed by Eng-in-Charge.

Taking up or down steel tubing incl connection, 15mm bore including cleaning of serviceable pipe for re-fixing complete all as specified and directed by Eng-in-Charge.

All as per ser item No 19 here-in-before but 20mm bore.

S&F mild steel tubes, 15 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors incl excavation complete all as specified and directed by Eng-in-Charge.

All as per ser item No 21 here-in-before but except pipe complete all as specified and directed by Eng-in-Charge.

S&F mild steel tubes, 21 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified and directed by Eng-in-Charge.

All as per ser item No 21 here-in-before but except pipe complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron socket for 15mm bore pipe including taking down and refixing pipes of any length as approved, complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron socket for 20mm bore pipe including taking down and refixing pipes of any length as approved, complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron nipple 15mm bore, 50mm long including taking down and refixing pipes of any length as approved, complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron nipple 15mm bore, 100mm long including taking down and refixing pipes of any length as approved, complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron nipple 20mm bore, 50mm long including taking down and refixing pipes of any length, complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron nipple 20mm bore, 100mm long including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron tanki nipple 20mm bore, 100mm long including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron tanki nipple 15mm bore, 100mm long including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron union 15mm bore including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron union 20mm bore including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron elbow 15mm bore including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron elbow 20mm bore including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron Tee 15mm bore including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs galvanized iron Tee 20mm bore including taking down and refixing pipes of any length complete all as specified and directed by Eng-in-Charge.

S&F in repairs 20mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Eng-in-Charge.

S&F in repairs 15mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Eng-in-Charge.

S&F in repairs 25mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Eng-in-Charge.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, aluminium brackets for bottom support, including flush pipe 32mm bore fixing in position complete all as specified and directed by Eng-in-Charge.

Petty repairs to low level flushing cistern adjustement of syphon, repairs of washer, adjustement of handle, float valve as requried for making the cistern functional complete all as specified and directed by Eng-in-Charge.

S&F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trenches/ under floor including necessary excavation complete all as specified and directed by Eng-in-Charge.

S&F in repairs PVC (SWR) bend/shoe of any radius for 110mm bore pipes complete all as specified and directed by Eng-in-Charge.

S&F in repairs fancy type 15mm bore bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified and directed by Eng-in-Charge.

S&F in repair for CP bib cock long body 15mm fancy type complete all as specified and directed by Eng-in-Charge.

S&F in repairs fancy type pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Eng-in-Charge.

S&F in repairs 15mm bore CP brass mixer Hot & Cold for WHB/ Sink complete all as specified and directed by Eng-in-Charge.

S&F in repairs flush pipe of polythene of low or high density PVC 32mm dia for low level cistern incl all joints complete all as specified and directed by Eng-in-Charge.

S&F syphonic action rod with float valve (Complete kit) for low level cistern fixed in repair complete all as specified and directed by Eng-in-Charge.

S&F in repairs brass spindle, any length, for bib tap, stop cock 15mm dia complete all as specified and directed by Eng-in-Charge.

S&F in repairs vitreous china wash down water closet pan ORISSA pattern size 580x 440mm white with integrated foot rest, making connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Eng-in-Charge.

S&F Vitreous China wash down Water closet pan (pedestal pattern) "with plastic closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging divice (excluding flusing cistern and flush pipe) in repairs complete all as specified and directed by Eng-in-Charge.

S&F in repairs vitreous china wash hand basin,pedestal pattern white flat back, size 550mm x 400mm including mild steel brackets, including cutting for and pinning in ends of bracket , including fixing of all fittings ( excluding of pillar cock, waste coupling and pvc waste pipe) complete all as specified and directed by Eng-in-Charge.

S&F in repairs CP waste coupling (half or full threaded), (minimum weight 32mm, 45 gms) complete all as specified and directed by Eng-in-Charge.

All as per ser item No 56 but 40mm bore for steel sink complete all as specified and directed by Eng-in-Charge.

Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats complete all as specified and directed by Eng-in-Charge.

S&F in repairs towel rail 600mm long PTMT and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Eng-in-Charge.

S&F in repairs MS angle iron bracket for WHB and kitchen sinks including fixing in wall making good to existing surface ( size of angle 35 x35 x5 mm thick) complete all as specified and directed by Eng-in-Charge.

Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable in all means complete all as specified and directed by Eng-in-Charge.

S&F PVC cover of any pattern water tank cap 500/1000 ltrs complete all as specified and directed by Eng-in-Charge.

S&F in repairs CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified and directed by Eng-in-Charge.

S&F in repair PVC waste pipe 32mm bore, for WHB complete all as specified and directed by Eng-in-Charge.

S&F in repair PVC waste pipe 40mm bore, for sink complete all as specified and directed by Eng-in-Charge.

M&L flush pointing in cement mortar 1:3 on brick tiles laid flat including raking out joints, hacking for key complete all as specified and directed by Eng-in-Charge.

S&F PVC connection 600mm long with brass nuts suitable for 15mm bore pipe complete all as specified and directed by Eng-in-Charge.

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed by Eng-in-Charge.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge.

M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge.

M&L for 10 mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling, chajjas, roof projection etc complete all as specified and directed by Eng-in-Charge.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces complete all as specified and directed by Eng-in-Charge.

M&L for preparing surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over chalk whiting, on plastered surfaces complete all as specified and directed by Eng-in-Charge.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Eng-in-Charge.

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) complete all as specified and directed by Eng-in-Charge.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishing the surface even and smooth withot using extra cement complete all as specified and directed by Eng-in-Charge.

S&F in repairs CP Jet for EWC including flexible pipe complete all as specified and directed by Eng-in-Charge.

M&L running welding in repair, any thickness of metal to be welded n exc 6mm complete all as specified and directed by Eng-in-Charge.

M&L running welding in repair, any thickness of metal to be welded n exc 2.5cm in length complete all as specified and directed by Eng-in-Charge.

M&L running welding in repair, any thickness of metal to be welded exc 2.5cm but n exc 5cm complete all as specified and directed by Eng-in-Charge.

S&F in repairs glazed ceramic tiles in patches of area n exe 5 sqm white /coloured (Shade/size as per existing) in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including rendring 10mm thick in CM 1:4 complete all as specified and directed by Eng-in-Charge.

S&F in repairs glazed ceramic tiles white /coloured (Shade/size as per existing) in walls/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including rendring 10mm thick in CM 1:4 complete all as specified and directed by Eng-in-Charge.

S&F in repairs kitchen sinks of stainless steel 1 mm thick with plugs, washers , incl bedding in cement mortar on dwraf wall or including fixing cantilever brackets and connecting union to pipe , over all size 495mmx420mm bowl size 420mmx330mmx160mm complete all as specified and directed by Eng-in-Charge.

S&F in repairs stainless steel kitchen plate rack, made out 1mm thick stainless steel, size 900x600x200mm (Minimum weight 10 Kg) with shelves and plat position as approved complete all as specified and directed by Eng-in-Charge.

S&F in repairs PVC cabinet size 450mmx325mmx120mm with looking mirror and making good the disturbed surface complete all as specified and directed by Eng-in-Charge.

S&F in repairs hand shower/ health fauset (ABS Chrome Plated) with 8mm dia, 1 metre long flaxible tube & wall hook complete all as specified and directed by Eng-in-Charge.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Eng-in-Charge.

S&F in repairs acrylic shelf 450mmx100mm fixed with chromium plated brass screws and plastic gutties complete all as specified and directed by Eng-in-Charge.

S&F in repairs of angle cock/stop cock spindle 15mm dia and length of spindle 50mm dia complete all as specified and directed by Eng-in-Charge.

S&F in repairs of angle cock/stop cock spindle 15mm dia and length of spindle 75mm dia ccomplete all as specified and directed by Eng-in-Charge.

Petty repairs to aluminium window and ventilator shutters, by making minor adjustment to hinges etc easing shutter including taking down of shutter if required and refixing in same position complete all as specified and directed by Eng-in-Charge.

Petty repairs to aluminium door shutters, by making minor adjustment floor spring etc easing shutter including taking down of shutter and refixing in same position after providing new rubber beading around the glass, screws etc, complete all as specified and directed by Eng-in-Charge.

Taking down Aluminium door shutter and repairs of pivot set for movement of swing door and refixing door shutter same opening complete all as specified and directed by Eng-in-Charge.

S&F in repair repairs Cast iron body door closer hydraulically regulated, designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Eng-in-Charge.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and directed by Eng-in-Charge.

S&F in repairs brass chromium plated shower rose with or without swivel joints, 125mm size with arm including fixing to steel pipe or union complete all as specified and directed by Eng-in-Charge.

S&F double legged floor door stopper aluminium alloy body and tongue, with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed by Eng-in-Charge.

S&F CP Glass corner shelf including CP railing, radius 300mm fixed in repairs complete all as specified and directed by Eng-in-Charge.

Petty repairs to cup board (Kitchen) including easening of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing handle etc with drawers adjusting of ball catches etc, (One unit shall comprises one cup board irrespective in numbers of shutters and drawers) complete all as specified and directed by Eng-in-Charge.

All as per ser item No 100 above but cup board (Bedroom) including drawers complete all as specified and directed by Eng-in-Charge.

M & L for block board 18/19mm thick grade 2 quality, exterior grade, commercial veneer on one face in cup board or drawers complete all as specified and directed by Eng-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Eng-in-Charge.

COSMO BUILDERS