REPAIRS TO ROOF FLOOR BRICKWORK PLASTERING JOINERY PLUMBING SANITARY WORKS IN DOMESTIC LINE AND MH AT CAD PULGAON

Amount

Dismantling corrugated steel sheeting, any gauge, thickness,including Removing L-type or J-type bolts in Roof Covering complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

M and L for 6 mm thick asbestos cement corrugated sheet in roofs, walls, etc fixed with L type or J type or cranked hook bolts complete all as specified and directed .

S&F for 0.56 mm thick plain Aluminium sheeting, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed .

Dismantling of timber scantlings 40 Sq cm and over in section in any position, unframed work complete all as specified and as directed.

Dismantling of timber scantlings 40 Sq cm and over in section in any position, framed work complete all as specified and as directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy brackets framing ( Beam, tee, angle, channel or flat sections) including distance peices, cleats etc conforming to Fe- 410W(Gde-E-250) quality B , complete all as specified and as directed.

M&L for painting two coats of synthetic enamel paint over one coat of red oxide including preparation to new or previously untreated steel and surfaces of any description, not otherwise described, over10 cm width or grith complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, including frame of any description and any thickness, fixed in any position complete all as specified and as directed.

Material and labour for false ceiling with aluminum snap grid frame work (size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with hangers 6mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long or hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with non asbestos cement eco-board decorative type size 600 x 600 x 4 mm thick fixed to aluminium frame work complete all as specified and as directed.

M&L for 6mm thick asbestos cement plain building boards fixed in repairs, fixed to timber framework with screws complete all as specified and as directed.

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in plinth protection , finished fair and even, without using extra cement complete all as specified and as directed.

M&L for 100 mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed.

M&L for 40 mm PCC (1:2:4) type B1 using 20 mm graded stone aggregates as in floor finished fair and even, without using extra cement complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

M&L joint free non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 10mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 10mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for Glazed ceramic tiles of size 300 x 200 x 7mm thick on vertical surfaces such as in dado/skirting and rendering in CM (1:3) 10mm thk on fair faces of wall surfaces etc, all as specified and as directed by Engineer-in-Charge.

M&L for Granite (of any type) tiles of dark black shade table rubbed 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20mm screed bed CM (1:6) complete all as specified and as directed.

M & L for sand filling under floors or pavings,spread ,levelled and rammed including watering and consolidation complete all as specified and as directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of M35 grade incl taking down of existing blocks complete all as specified and as directed.

M&L for in repair 60mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of M35 grade except interloacking paver block complete all as specified and as directed.

M&L for PCC type C1 (1:3:6) (20mm graded aggregate) coping, kneelers, bed plates, kerbs, not provided , and the like incl weathering slightly rounded chemfered angles and throughting complete all as specified and as directed.

Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles complete all as specified and as directed.

M and L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M and L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.

M and L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water,etc complete all as specified and as directed.

M & L for rendering 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.

M & L for rendering 5 mm thick in CM (1:4) over backing coat of 10 mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and as directed.

M&L three coat of white wash on newly prepared wall surfaces,including preparation of plastered or untreated surfaces , etc complete all as specified and as directed.

Taking down of chowkhats or frames not exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each complete all as specified and as directed.

S&F Anodised Aluminium frame work in partition/doors/windows with shutter all round and including aluminium beading,glazing cleats fixed in frames complete all as specified and as directed.

S&F Neoprene rubber beading/packing complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Pressed steel frames for doors/windows size of 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

Supply & Fixing 35 mm thick II class hard wood(sal) door plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed by EIC.

Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed by EIC.

Supply & Fixing 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed by EIC.

Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 100mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

S& F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified.

S& F 3 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

S& F 3 mm thick sheet figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

M & L 12 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to Aluminium frame work etc all as specified and directed by Engineer-in-Charge .

Supply & fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs 20mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge.

S&Fin repairs rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

S & Fixed in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms,complete all as specified and directed by Engineer-in-Charge

S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white incl P or S trap with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed.

S&F in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge

S&F in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including 15 mm dia bore fancy type pillar tap , waste coupling, brackets, PVC waste pipe of 32mm, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair stop valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed.

S&F repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge

S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge

S&F in repair PVC waste pipe 40mm dia for sink, complete all as specified and as directed by Engineer-in-Charge

S&F in repair PVC waste pipe 32mm dia for wash basin, complete all as specified and as directed by Engineer-in-Charge

S&F in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PTMT towel rings fixed with and includind plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge

M&L for painting one coats of synthetic enamel paint to steel or iron surfaces including preparation of old painted surfaces of any description,over10 cm width or grith, not otherwise described, all as specified and directed.

M&L for painting one coats of synthetic enamel paint to wooden surfaces including preparation of old painted surfaces of any description,over10 cm width or grith, not otherwise described, complete all as specified and directed.

M/s. Nikhil B Nistane

M/S Ramakant Chourasia

RAJ ENTERPRISES

Ankit Construction

M/s VILAS RATAN MENDHE

M/S L M Chourasia

SHREE SIDDHIVINAYAK TRADERS

Bidder Name

M/S L M Chourasia

Ankit Construction

RAJ ENTERPRISES

SHREE CONSTRUCTIONS

SHREE SIDDHIVINAYAK TRADERS

M/s VILAS RATAN MENDHE

M/S Ramakant Chourasia

M/s. Nikhil B Nistane