8144/E8 REPAIRS TO INTERNAL ELECTRIC SUPPLY AND OTHER ELECTRIFICATION WORKS AT 100 ORs QTRs, DEFENCE COLONY, MD ACCN AND MES KEY PERSON QTRs AND REPAIRS TO LOW TENSION EXTERNAL ELECTRIC SUPPLY AND ALLIED WORKS FOR MH, 100 ORs QTRs AND DEFENCE COLONY

Amount

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit.

M & L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic casing capping, casing capping incl accessories fixed on wall / ceiling etc with suitable clamps, screws, etc in wall including making good the disturbed surfaces, matching with the existing wall surfaces including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch and one regulator.

(c) One 3 pin 5 Amps switch socket on independent board.

(d) One 3 pine 5 amps switch socket on same board along with other switches.

(e) One bell point controlled by bell push switch on independent board.

M & L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth ,including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

(a) One light point controlled by one switch

(b) One fan point controlled by one switch and one regulator

(c) One 3 pin 5 Amps switch socket on independent board

(d) One 3 pine 5 amps switch socket on same board along with other switches.

(e) One bell point controlled by bell push switch on independent board.

All as per item No 2 herein before but with 2.5 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board.

M & L for sub main wiring with PVC insulated, FRLS 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv all as specified and directed.

All as per item No 5 herein above but with 2 runs of 2.5 Sqmm and one run of 2.5 sqmm earth wire in PVC conduit as specified and as directed.

All as per item No 5 herein above but with 2 runs of 4 Sqmm and one run of 4 sqmm earth wire in PVC conduit as specified and as directed.

All as per item No 5 herein above but with 2 runs of 10 Sqmm and one run of 10 sqmm earth wire in PVC conduit as specified and as directed.

All as per item No 5 herein above but with 4 runs of 10 sqmm and one run of 10 sq.mm earth wire in PVC conduit as specified and as directed. Note for item Nos 2 to 9 :- (a) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (b) For concealed wiring the quoted rate shall be inclusive wherever required cutting chases etc.

Taking down carefully by unscrewing from boards/outlet boxes, wall ceiling fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, with plug, switch fuse and regulators etc., taken as credit and making good the disturbed surfaces of wall etc all as directed.

S&F Ceiling rose surface Ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and directed.

Supply and Fix Switch piano flush type 5 amps single pole, one way, 240 Volts all as directed.

Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 amp, flush type all as directed.

Supply and Fix Socket outlet 3 pin 5 Amps flush type all as directed.

Supply and Fix Bell push flush type 5 amps single pole 240 Volts all as directed.

Supply and Fix Buzzer, AC, 230 volts, single pole all as directed.

Supply and Fix Bell ding dong, AC, 230 volts, single pole all as directed.

Supply and Fix Socket outlet 3 pin 15 amps flush type all as directed.

Supply and Fix swtich socket combination 2 in 1, 3 Pin, 5 amp, flush type all as directed

Supply and Fix switch socket outlet modular type multipurpose 3 pin, 15/16 amp and one pin, 5 amp controlled by one switch all as directed.

S&F stepped type electronic fan regulator flush type all as directed.

Supply and Fix Switch flush type direct to fit 16 amps single pole, one way, 240 Volts all as directed.

Supply and Fix Socket flush type direct to fit 16 amps single pole, one way, 240 Volts all as directed.

Supply and Fix PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified

Supply and Fix PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified

S & F Lamp holder PVC/polycarbonate with back plate for pendant/batten fittings all as directed.

S & F 20A Power Unit Athena Modular AC Box Plastic box 4 module plate, 20A starter, 20A socket, 25A plug all as specified and as directed.

S&F modular Fan step regulator, 120W - 1 module for ceiling Fan of 1200 mm sweep all as specified and as directed.

Supply and Fix modular switch 1 way 6A, 1 module

Supply and Fix modular switch 1 way 16A, 1 module

Supply and Fix modular Bell push 6A 1 module

Supply & Fix Bell Multimusical type all as specified and as directed.

S&F Modular white cover with plate with frame 2 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 3 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 4 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 6 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 8 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 12 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 16 module incl matching with white cement wk if necessary

S&F Modular flush box 1/2 module

S&F Modular flush box 3 module

S&F Modular flush box 4 module

S&F Modular flush box 6 module

S&F in replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps all as specified and as directed.

Taking down carefully existing un-serviceable main switch, DB's including boards etc, from its original position complete all as directed.

Supply and fix in repairs MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated bus bar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated bus bar with neutral link, 4 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated bus bar with neutral link, 8 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated bus bar with neutral link, 12 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix in repairs MCCB four pole , 415 Volt, 63 Amps,16 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

Supply and fix in repairs MCCB four pole , 415 Volt, 125 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

Supply & Fix in repairs MCB Four pole 415 volts, 40 amps 'C' Curve 10 kA Capacity all as directed.

Supply & Fix in repairs MCB Four pole 415 volts, 63 amps 'C' Curve 10 kA Capacity all as directed.

Supply and fix in repairs MCB DP, 240 Volts, 20-63 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply and fix in repairs MCB SP, 240 Volt,10-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

S&F in repairs MCCB single pole & neutral, 240 volts, 40 amps, 30mA, 10kA all as directed.

Supply and fix in repair of retrofit lamp 11 watt E-27/B22 type suitable for 230 Volts 50 Hz AC supply complete including taking out old/ unserviceable complete as directed.

Supply and fix Wall mounted LED Batten with tube extruded Aluminium heat shrink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 20W LED life time of 30000* hours including lamp all as specified and as directed. Make: Havells cat part No. LUMILINEPLUSBS20WLED865SPCSS/ CROMPTON cat part No.TRIMLINE LDL-20-WW/ HALONIX cat part No- LED AL BATTEN HLB-03-20-CW-AL-HL1.

Supply and fixing LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make:- havells cat No.ENDURA LINEAR NEO BS22 WLED 865 SPCWH/ PHILIPS cat No B1021LED25S6500PSUGRST/ CROMPTON cat No. LDRR24-CDL/BAJAJ Cat No. BCLAB SP 22L LEDCWPCSD.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including onnecting up with three core flexible copper conductor cable of suitable size complete. Make:- havells cat No.ENDURA LINEAR NEO BS10WLED 865SPC WH / BAJAJ Cat No. BCLAB SP 10WH/ CRMPTON Cat No. LDLL 10- CDL.

Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. Supply and fix hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing.

M&L for painting of ceiling fan complete , using spray gun, in site with synthetic enamel paint by spraying including filling cavaties with filler , one coat after cleaning all dust complete all as specified and directed

Taking down Fans ceiling/Exhaust/wall of any sweep, capacity make,model,sealing cable and dismantling blades, removing fan and blades for repair/servicing/replacement of parts/rewinding and refixing the same after replacement of spares and parts servicing rewinding complete all as specified. Note : spare parts and rewinding and servicing shall be measured separately.

Dismantling the fans of any make/model and type, overhauling /servicing, greasing/lubricating, insulating electric leads, replacing cotter pins, bolts and nuts with copper pin, assembling back, checking for proper fixing and safety and testing all as specified and directed for pedestal fan upto 1400 mm sweep:

Dismantling the following types of fans of any make/model/sweep, removing the burnt out winding wires, rewinding with winding wires and insulation materials overhauling/servicing, greasing/lubricating, insulating electric leads, replacing cotter pins, bolts nuts, replacing unserviceable bearing, bushes assembling back checking for proper fixing and safety and testing all as directed and specified for :-

(a) ceiling fan upto 1400 mm sweep.

(b) Exhaust fan upto 450 mm sweep.

(c) Wall mounting/ Pedestal fan/air circulator upto 600 mm sweep.

Removing following unserviceable parts/items, supply and fix new items/parts of same specification existing and as described below for ceiling/exhaust/pedestal fans etc

(a) Ball bearing for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep.

(b) Bush bearing for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep.

(c) Fan condenser capacitor 2.5 mfd.

(d) Fan condenser capacitor 4 mfd.

(f) Fan clamp for ceiling fan complete with rubber shackle, shackle bolt, nut, cotter pin, clamp complete.

Taking Down and Refixing incl Painting of water heaters (Geysers) of following capacity of any make/model in site with synthetic enamel paint by brush including filling of cavities with fillers one coat after cleaning all dust etc including writing MES numbers etc all as specified and directed for:-

(a) Water heater 25 litres capacity.

Dismantling following unserviceable items/parts from water heaters of any capacity/make/model, supply and fix new items/parts of same capacity/type/model, connecting up and testing :-

(a) Heating element 1.5 KW capacity AC 230 V and conforming to IS specifications screw/flange type.

(b) Heating element 2.0 KW capacity AC 230 V and conforming to IS specifications screw/flange type.

(c) Thermostat suitable for water heater upto 25 litres capacity.

(d) Indicator lamp any type suitable for water heaters upto 25 litres capacity.

(e) Non return valve 15 mm dia size.

(f) PVC connections with brass check nuts 15 mm dia x 45 cm long for hot water supply.

(g) PVC connections with brass check nuts 15 mm dia x 45 cm long for cold water supply.

(h) Rubber gasket flat/'O' ring type suitable for water heater.

(j) PVC cable 3 core flexible copper conductor cable of size 40/0.193

(k) Plug top 3 pin 15 amps.

(l) Pressure release Valve suitable for geysers upto 25 litres capacity.

Supply and fixing round shape 10/12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size completethree core flexible copper conductor cable of suitable size complete. Make:- Havells cat No. INTEGRA NEO SURFACED LS10WLED 840S/ CROMPTON cat No. LCDSPLN-R-12-CDL/ BAJAJ Cat No. BGSLO SLEEK SURFACE 12WWH RD.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make:- Havells cat No.HEXAFT10WLED 857SSYMBOPC/ PHILIPS Cat No. WT202W LED10S CW PSU S3 PC /BAJAJ Cat No. BIBWP 10W LED.

Supply & Fixing of LED driver for LED fittings upto 40Watts of Any size/type .

Removing old building security lights, supply and fixing energy saving LED security light fitting 30W made up of presure die cast alluminium housing with acrylic cover as diffuser with IP66 protection complete all as specified and directed. Make:- Havells cat No- VILUMINASL30WLED757PASYBOPC/ HALONIX cat no HLSLD-09-30CWL-R/ CROPTON cat no. LSTS-30-CDL/NL-M/ wipro cat No.LR02-331-XXX-57-XX 30Watt.

Removing the existing Gate light & Supply and installation of new 35/40 W LED 5700K New generation Post top energy saving & environmental friendly long life versatile spun aluminium IP66 roadway luminaries with high power LED as light source and connecting in the existing cable complete all as specified and directed Make:- Havells Cat Part No. RUBYPT35WLED757PSYMTOPC/ CROPTON cat No- LPTC-40-CDL/ BAJAJ cat No. BGCT W4 LED WW 40W LED

S & F MCCB 3 pole 125 Ampa,415 volts with rupturing capacity 16 KA, all as specified.

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

Taking down old u/s existing SMC box and supply and fix pole mounted Sheet Moulded Compound(SMC) Box weather proof type with hinged type door off white color of size 240x130x110 mm comprising of 1 No MCB 6A and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts all as specified and as directed.

M&L for checking electrical points such as switches, sockets (5/15Amps), light points, MCB's,Ceiling Fans/Exhaust fans switch board and its connected electrical wiring of any type, for continous electric supply, rectification of defects including carrying out minor repairs fixing screws ,paper jointing of loose wires of any typeand size ,applying of PVC insulation tape ,fixing fuse wire of any type, renewal of small pieces of wire upto 1.00 mtr length as per existing size and type complete including matching of distrubed surfaces if required complete all as complete specified and as directed

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Returning filling in using excavated soil including spreading levelling watering well ramming in layers not exceeding 25 cm each all as directed.

Removing excavated surplus material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed.

Supplying and laying spread in trenches, sieving sand including cleaning, spreading, leveling, punning for laying/ cushioning of cable all as specified and as directed. Note:- Punned thickness shall be measured and paid.

Supplying and laying of burnt Fly ash bricks class standard size for protection of cable as directed.

M&L for plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete all as specified.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in beds of drain all as specified .

Disconnecting and taking down old UNSV LT UG Cable in treches, wall & poles and taken as credit including supplying and laying in trenches/ poles/ wall etc LT UG Cable XPLE insulated, armoured, heavy duty with multstranded aluminium conductor 1100 volts grade conforming to IS specification and of the following size:- Note:- Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used wherever required while connecting cables to panel board. Earth works such as excavation, refilling etc, shall be measured and paid separately under relevant items:-

(a) LT UG Cable 2 core 10 sqmm .

(b) LT UG Cable 4 core 16 sqmm .

(c) LT UG Cable 4 core 25 sqmm .

(d) LT UG Cable 3.5 core 35 sqmm .

(e) LT UG Cable 3.5 core 50 sqmm .

(f) LT UG Cable 3.5 core 70 sqmm .

(g) LT UG Cable 3.5 core 95 sqmm .

(h) LT UG Cable 3.5 core 120 sqmm .

(j) LT UG Cable 3.5 core 185 sqmm .

Re-laying only (where directed at site) in trenches and connecting with suitalbe size of cable jointing kit/ lugs/ thimble etc. Serviceable under ground cable retrived from taking out as Srl No. 08 of above schedule of following size:- Note:- Cable jointing kit will be measured & paid separately under relevant items of sch 'A'

(a) LT UG Cable 2 core 10 sqmm .

(b) LT UG Cable 4 core 16 sqmm .

(c) LT UG Cable 4 core 25 sqmm .

(d) LT UG Cable 3.5 core 35 sqmm .

(e) LT UG Cable 3.5 core 50 sqmm .

(f) LT UG Cable 3.5 core 70 sqmm .

(g) LT UG Cable 3.5 core 95 sqmm .

(h) LT UG Cable 3.5 core 120 sqmm .

(j) LT UG Cable 3.5 core 185 sqmm .

S & F in repair straight through joints (epoxy) heat shrink type for underground cable including joint kits and labour complete for making joints suitable for LT PVC sheathed/ armoured heavy duty cables with aluminium conductor of following:-

LT UG cable upto 4 core 16 Sqmm

LT UG cable upto 3.5/4 core, 25 Sqmm to 50 Sqmm

LT UG cable upto 3.5 core, 70 Sqmm to 150 Sqmm

LT UG cable upto 3.5 core, 185 Sqmm to 300 Sqmm

Supply and laying in repair steel tubes, 'light grade' galvanised, with all fittings of bore of tube 40mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed

Supply and laying in repair steel tubes, 'light grade' galvanised, with all fittings of bore of tube 80mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed

Supply and laying in repair steel tubes, 'light grade' galvanised, with all fittings of bore of tube 100mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed

Dismantling steel poles/ struts, any size including pcc couping.

Supply and erect steel tubular swaged poles complete with MS base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP- 31 (9.00 metres long) conforming to IS-2713 including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer over the exposed surface and applying two coats of black bitumenous paint over the embeded portion of pole, erecting in truly vertical position including excavation in any strata and earth work complete all as specified and directed. Note :- PCC for foundation and coping will be measured & paid separately under relevant items of Sch 'A'.

M&L for removing the existing street light fitting of any type & make and Supply & installation of new street light fittings,60W LED 5700K New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaries with high power LED as light source in the existing pole duly wired complete all as specified and directed.

M & L for dismantling and taking down the existing street light fitting led type for repair and replacing the unservicable LED driver with new upto 100W LED 5700K and refixing the same in the existing pole duly wired complete all as specified and directed.

M&L for removing the existing street light fitting of any type & make and Supply & installation of new 90 W LED 5700K New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaries with high power LED as light source in the existing pole duly wired complete all as specified and directed.

Removing the existing Gate light & Supply and installation of new 40W LED 5700K New generation Post top energy saving & environmental friendly long life versatile spun aluminium IP66 roadway luminaries with high power LED as light source and connecting in the existing cable complete all as specified and directed.

Removing the existing unserviceable bollards light & Supply and installation of Cone NXG LED Bollard new 8 W/9W LED bamboo series IP 65 rating, out door luminaires, New generation energy saving & environmental friendly long life aesthetically designed aluminium land scape luminarire for diffused lighting with high power LED Bollards as light source and connecting in the existing cable complete all as specified and directed Make:- Havells Cat part CONENXGBLS8WLEDPSYM857TOPC or equivalent make as listed in PS

Supply and laying PVC insulated copper conductor (Flexible), industrial cables PVC sheathed 3 Core, 1.5 Sqmm multi standed cable, 1100V grade for connecting light fitting to junction box with lugs, sleevs etc complete all as directed.

Removing the existing unserviceable flood lights from high mast poles and supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

S&F Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure all as specified and directed. Make: Bajjaj cat part No.BGAV 302 LED or equivalent make as listed in PS

Supply and fix time switches 250 V single Phase of 20 Amp rating with contactor fitted inside steel enclosure all as specifiede and directed

S & F MCCB 3 pole 400 Amps,415 volts with rupturing capacity 35 KA. All as specified including taking out old one.

S & F MCCB 3 pole 250 Amps,415 volts with rupturing capacity 25KA. All as specified including taking out old one

S & F MCCB 3 pole 125 Amps,415 volts with rupturing capacity 16KA. All as specified including taking out old one

S & F MCCB 3 pole 63 Amps,415 volts with rupturing capacity 16 KA. All as specified including taking out old one.

Preparation of old surface and painting of steel tubular electric poles above coping level including brackets,clamps etc with good quality silver paint(two coats) complete including writing pole no and all as specified and directed.

Finding and rectification of electrical fault by Checking of external/internal(LT) elect supply feeder, street light feeder,OH conductors /under ground cables using elect tools, equipments and safty devices after arranging elect shut down of feeders from sub station to remove elect faults like tightning of loose connection,removing of any electric short,meggring of cable,excavation of soil for removing of faulty cable on a particular span and relaying of cables after removing of fault, re-tightning of cable lugs etc all as required at site and as directed. Note:- (i) The electrician employed for the purpose will be highly skilled along with one mate and should have all necessary tools and safty devices. (ii) Any major materials used for rectification of faults like Cables,MCB/MCCB/cable jointing kits/cables of any type etc will be measured and paid seperately or supplied by department. (iii) Rate including hire of HT/LT fault Locaterany other tools/equipments and Earth Work. works should be completed with in 12 hrs.

Material and labour for servicing DG Set Engine complete oil servicing, necessary replacement of below mentioned spares and servicing work for 380 KVA DG Set incl 6 months warrantee for servicing (a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant as required.

Material and labour for general oil servicing of DG Set Engine complete and replacement of below mentioned spares and servicing work for 15 KVA DG Set incl 6 months warranty for servicing (a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant - 1 Ltrs.

Dismantling self starter of any make from diesel engines of any make, opening up, overhauling / servicing including replacement of armature coils bushes carbon brushes, springs, screws, etc., assembling back, re-fixing and testing for genset capacity following capacity:-

DG Set 380 KVA

M&L for fuel pump & Fuel injectors calibration charges for DG set capacity upto 380 KVA complete all as specified and as directed.

V' belt for fan / dynamo / water pumps for genset capacity upto 380 KVA

M&L for replacement of automatic voltage regulator (AVR) of armature of DG set capcity upto 380 KVA, 415 volts 3 phase 1500 RPM 50 Hz suitable make, as existing at site.

Material & Labour for Cutting and cleaning the tree branches around the street light poles/ /sub stn/ LT OH lineconductors and maintain 2 mtr gap all around free from branches of tree and clear the site and throw away cut branches etc, to a distance exceeding 50m all as directed. Note: Span shall be measured along with the direction of OH/ LT.

Supply, install, test & commissioning LT panel out door, floor mounted/pedestal type,cubical, self supported,CPRI approved ,front and rear openable , double door hinged type with locking arrangement and slopping top canopy ,suitable ventilations on both sides with wire mesh, IP-52 protection with dust and vermin proof etc.fabricated out of 3.15 mm CRCA sheet duly powder coated with 7 tank chemical process,mounted/fixed on and including MS angle iron stand of 1.0 mtr height (50 cm above FFL and 50 cm below FFL) ,fabricated out of 50x50x6 mm thick MS angles duly painted with black enamel synthetic paint over a red oxide primer duly grouted in PCC 1:3:6 foundation,control wiring copper stranded PVC insulated FRLS cables not less than 1.5 sqmm, suitable size/capacity of copper strips for switch gear connection from main bus bar,earth bus strip of 32x6 mm size for entire length of panel ,suitable size of MS gland with gland plate and alluminium lugs/thimbles for all incoming/out going cables etc.complete all as directed and accommodating the followings:-

M&L for Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed

M&L for Air termination, single pointed aluminium rod of size 12mm dia and 300mm long fixed with on suitable insulater base all as specified and directed.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos, of size 8mm dia 25mm long hex. head screw

S&F in repairs for in formatory/eqpt history sign boards of size not less than 900 x 600 mm rectangular type with 2 mm thick MS sheet plain type made out of angle iron channels frame, back ground and epqt history details(i.e. Name, Make, Ser No,Capacity of eqpt, Vintage, SM/MES No etc.,) with high intensity retro reflective sheet letters as specified colours (blue and white) complete all as specified and directed.

M & L in replacement of old damaged/ worn out/rusted sign board of any size/type from various installations. Supply and fix Stainless Steel Signage Boards as per site requirement with retro reflective sheet of size 5 feet X 3 feet of 3mm thickness with SS pole of 6 feet height and suitable size of borders of stainless Steel. The display board should high density retro reflactive sheet letter as specified colours (blue and white) complete all as specified and directed. The style/details of Letters/ Alphapets/logo of MES etc shall be provided by the department.

M & L for Earthing complete with copper earth plate electrode 60 × 60cm ×3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper earth lead strip 20 × 3mm ( up to 7.5 m in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8 mm dia 150 mm long reinforcement , watering funnel with 25 mm dia light grade for watering and for protection of earth electrode 40 mm GI pipe all as specified and directed and tested on completion.

pmv.enterprises (BID ID -3123655)

rc enterprises (BID ID -3123889)