Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹38.8 L+₹1.7 L (4.56%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹40.2 L+₹3.1 L (8.43%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹40.2 L+₹3.1 L (8.47%)Rejected-Finance DALHOUSIE ROAD BYE PASS CHOWK PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹40.5 L+₹3.5 L (9.33%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) PAthankot
REPAIR /REPLACEMENT OF JOINERY AND WINDOWS OF CERTAIN BUILDING UNDER AOR OF AGE B/R-I AT AIR FORCE STATION PATHANKOT.
2024_MES_664175_1
GE/PAF-24/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Pathankot
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) Pathankot
₹80,000
Yes
28 Oct 2024
5 Jul 2024
10 Sept 2024
5 Jul 2024
3 Sept 2024
19 Jul 2024
Amount
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each including taking out hold fast , complete all as specified and directed by Engineer-in-charge.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each , complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description n.exc 1 sqm each , complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each , complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description exc 2 sqm each , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates with and including necessary fixing lugs, stainless steel hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer, all as specified.NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer, all as specified. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated , complete all as specified and directed by Engineer-in-charge. NOTE :- All screws shall be self tapping chrome plated
Supply and fixing for factory made solid PVC door frame single rebated of size 50X47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube in opening, complete all as specified and directed by Engineer-in-charge.
Supply and fixing for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for factory made Flush door of 35 mm thick ,solid core construction with particle board core :- All screws shall be self tapping chrome plated , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 , complete all as specified and directed by Engineer-in-charge.
Material and labour for preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed by Engineer-in-charge.
Material and labour for preparation of old painted wooden surfaces of any description and in any situation over 10 cm width or grith and applying one coat of synathetic enamel paint , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for stainless steel wire cloth fixed as in uPVC Window frame/Steel window box type frame/skeleton shutters frame etc, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples , complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples, in steel or wooden windows/doors with wooden beads or at any place and situation, complete all as specified and directed by Engineer-in-charge.
Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads , complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair 3mm thick sheet glass ordinery quality and glazing with oil putty with pin in square n exc. 0.50 Sqm in each pane , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for factory made Steel window 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) Stainless steel Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete: NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for factory made Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete: NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. NOTE:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile etc , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 100mm long (12Gauge) butt hinges stainless steel anodised and fixed , complete all as specified and directed by Engineer-in-charge. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
Supply and fixing in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Stainless steel sliding door bolts, plate type, , with bright bolt not lesss than 10mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Stainless steel Handel of 150 mm long fixed with Self Tapping screws , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Stainless steel Handel of 125 mm long fixed with Self Tapping screws , complete all as specified and directed by Engineer-in-charge.
Taking down existing cabinets cupboards and Supply and fixing in repair factory made 18/19 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, complete all as specified and directed by Engineer-in-charge.
Material and labour for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed.
Supply and fixing for Continuous (piano) hinges,Width of flaps (when open) in 30 mm flap stainless steel , bright finish or electro galvanished , complete all as specified and directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description and in any position , complete all as specified and directed by Engineer-in-charge.
Framed work as in doors of gates of angles or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing with two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed by Engineer-in-charge.
Mild steel, plain, black sheet in wall cladding, steel gates & similar work, cut to size, holes punched; including rounded headed screws, clout nails or revets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required with two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed by Engineer-in-charge.
Material and labour for preparation of new steel surfaces of any description and in any situation over 10 cm width or grith and applying two coat of synathetic enamel paint over a coat of red oxide primer , complete all as specified and directed by Engineer-in-charge.
Material and labour for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc , complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Mortice lock, vertical type 4 lever size 65 mm mild steel body , complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair aluminium die cast body Door closer hydraulically regulated design No 2 universal type suitable for door shutter , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 5.00mm thick glass fixed with rubber packing for securing in aluminium/uPVC windows snap beading and metal pins in skelton shutters of doors and windows , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for solar control film 25 micron reflective type stick to glass panes , complete all as specified and directed by Engineer-in-charge.
Material and labour for Easing of steel window shutters area not exc 2 Sqm each , including adjusting greasing/oiling to welded where as required easy opening and closing , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Framed work such as grills,gratings etc.with ends of bars,shouldered and/or riveted,or forged into pikes,framed guard bars,etc, complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware, replacing side rail as required including renewal of unserviceable screw, etc and refixing in same opening as required at site , complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware, replacing bottom rail as required including renewal of unserviceable screw, etc and refixing in same opening as required at site , complete all as specified and directed by Engineer-in-charge.
Supply only second class hard wood, wrought, panel door side rail of sectional size exc 30 sqcm and not exc 50 Sqcm & applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-in-charge.
Supply only second class hard wood, wrought, panel door side rail of sectional size exc 50 sqcm and not exc 70 Sqcm & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed by Engineer-in-charge.
Material and labour for Re securing or easing and adjusting without taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm, complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair Drapery curtain rod of stainless steel 20mm dia complete with bracket heavy duty and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw and disturbed area to be made good with existing finishes, complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair Stainless steel rod for of 20mm dia cupboard shuttaer for hanging cloth including two nos braket of approved quality , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for aluminium door seal up to 1200mm long best quality , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 0.56mm plain aluminium sheeting to doors with aluminium screws fixed in repairs, complete all as specified and directed by Engineer-in-charge.
Supply and fixing for factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made , complete all as specified and directed by Engineer-in-charge.
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of indow above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi chambered frame, with inbuilt roller rack and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile imension in higher side shall be accepted but no extra payment on this account shall be made , complete all as specified and directed by Engineer-in-charge.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC ulti-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made , complete all as specified and directed by Engineer-in-charge.
Supply and fixing for factory made uPVC white colour Casement window single/ Double panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of opriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension,EPDM asket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement dles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and usion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of uired size and of approved quality, complete all as specified and directed by Engineer-in-Charge. lass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile sion in higher side shall be accepted but no extra payment on this account shall be made, complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair 3mm to 5mm thick sheet PVC Fiber glass ordinery quality and glazing with Silicone Sealant for glass with pin in square n exc. 0.50 Sqm in each pane , complete all as specified and directed by Engineer-in-charge.
Jay Ann Construction Company (BID ID -3074887)
Auto India (BID ID -3076150)
WALIA ENTERPRISES (BID ID -3071996)
INDERJIT SINGH (BID ID -3069513)
A R ENTERPRISES (BID ID -3069466)
KUMAR TRADING CO (BID ID -3069454)
jagdambe traders (BID ID -3069485)
PARVINDER BHARDWAJ (BID ID -3077032)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .