REPAIR , REPLAECEMENT OF INTERNAL WIRING, DISTRIBUTION SYSTEM, COOLING, HEATING APPLIANCES IN RESTRICTED, DOMESTIC AREA OF SQAE A and LPR OF DGQA UNITS, AQAW A UNITS, NAI UNITS UNDER GE P NO 1 JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, pendants, regulators, sockets etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed. (Note : (i) Taking down of light fittings any type will be measured separately. (ii) Conduit and accessories will not be dismantled on roof/floor)

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified as directed.

M&L for point wiring with 1.5 Sq mm, FRLS, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through and including concealed PVC rigid non metalic conduit of size 20 mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLS, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etcand making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces all as specified and directed for :- (Note:- (i) Cost for cutting chases and concealing the conduit pipe in existing wall is deemed to be included in the item rate quoted. (ii) Conduit will not be concealed in ceiling but fixed on ceiling surface only.)

One light point/fan point controlled by one switch.

One switch socket combination out let 5 Amps on independent board.

One Call bell Point Controlled by one bell Push.

One socket out let 5 Amps on the same board with other switches.

All as per item No. 3 above but on surface PVC rigid non metalic conduit of size 20 mm/casin-caping as required, for One light point/fan point/socket outlet 5 Amps independent point controlled by one switch.

All as per item No. 3 above but drawn into the existing conduit as required, for One light point/fan point/socket outlet 5 Amps independent point controlled by one switch.

All as per item No 3 above but with 2.5 sqmm PVC insulated multi stranded copper conductor and 2.5 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board.

Supply & Fixing Modular type Switch single pole 6 Amps one way complete all as specified and directed.

Supply & Fixing Modular type Switch single pole 16 Amps one way complete all as specified and directed.

Supply & Fixing Modular type socket out let 2 in 1, 6 Amps complete all as specified and directed.

Supply & Fixing Modular type Socket out let 2 in 1, 6/16 Amps complete all as specified and directed.

Supply & Fixing Modular type Bell Push single pole 6 Amps one way complete all as specified and directed.

Supply & Fixing Bell, AC, Ding Dong type 230 Volt complete all as specified and directed.

Supply & Fixing Fan step type Regulator modular type, 120 watts, 230 Volt complete all as specified and directed.

Supply & Fixing Ceiling Rose Surface PVC type 65 x 50 mm two to three terminals complete all as specified and directed.

Supply & Fixing Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as directed.

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4 way, TP & N, double door type, 440 Volt, suitable for MCB incomer. (Note : MCBs will be Measured separately)

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SP & N, double door type, 240 Volt. (Note : MCBs will be Measured separately)

S&F in repairs Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and directed.

Supply and Fixing MCB, TPN, 415 Volt of capacity 40 Amps, 10 KA.

Supply and Fixing MCB, SPN, 230 Volt of capacity 32 Amps, 10 KA.

Supply and Fixing Miniature circuit Breakers, single pole, 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA.

M&L for wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 6 Sq mm in and including/drawing through rigid non metalic PVC conduit including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth. (Note :- 2x 6 Sq mm conductor cable, 1 x 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length)

M&L for wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 4 Sq mm in and including/drawing through rigid non metalic PVC conduit including continuous PVC insulated copper conductor single core earth continuity conductor of size 4 Sqmm connected common earth. (Note :- 2x 4 Sq mm conductor cable, 1 x 4 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length)

Supply and fix in repairs MCCB, with sheet steel enclosure, AC, 415 V, four Pole, 100 Amps, 25 KA.

S&F in repairs Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB upto 63 Amps, 415 Volt all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type, as directed, with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix LED tube light fitting box type 20 watts, 2000-2200 luminaire with poly carbonate LED upto 2100 lumin tube rod with in built reflector of same make, connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0. 20mm with two Nos. MS bracket on wall including hanging arrangment and necessary fixing arrangement complete all as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below ground level, connecting GI earth wire of size 4 mm dia from earth plate to body of the equipment by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15 mm bore GI light grade pipe for protection of earth lead from earth plate (6 mtrs long), 20 mm GI light grade watering pipe, PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in earhing pit, PCC cover, charcoal or coke & salt filling and necessary excavation and earth work and all other relevant works including testing all as specified and shown in electrical plate No.3 of MES Schedule part-I.

Taking down old unserviceable Sub main wiring with aluminium/copper conductor, any type/size complete with/without conduit and remove from site all as directed.

Taking down old unserviceable DBs/Main switches any type/size complete with all accessories and remove from site all as directed.

Supply fixing/connecting Static electronic electric energy meter, three phase, 415 volts AC, 50 Hz, of capacity 05 to 30 Amps, class 1.0 accuracy with LCD display including connecting the meter in the existing electrical system/cables and seal by means of sealing wire and lead including disconnecting/taking down u/s burnt energy meters from existing boards/boxes, deposit to E/M store complete all as directed. (Note : (a) Meter reading record shall be maintained before and after replacement.(b) Dismantled u/s energy meter shall be deposited to E/M store yard.)

Supply fixing/connecting Static electronic electric energy meter, Single phase, 230 volts AC, 50 Hz, of capacity 10 to 60 Amps, class 1.0 accuracy with LCD display including connecting the meter in the existing electrical system/cables and seal by means of sealing wire and lead including disconnecting/taking down u/s burnt energy meters from existing boards/boxes, deposit to E/M store complete all as directed. (Note : (a) Meter reading record shall be maintained before and after replacement.(b) Dismantled u/s energy meter shall be deposited to E/M store yard.)

Comprehensive maint of window type / split type air conditioner of capacity 1.5 / 2 ton including taking out, reinstalling after repairing, cleaning, servicing, oiling in moveable parts and charging of refrigrent gas if required including testing, comissioning and quarterly servicing of each Air Conditioner and in between period as an when required machanic will visit for minor repair such as electric connections, replacement of small size of wire, cleaning of filter and complete till completion of work all as specified and as directed. Note:- i) Cost of refrigrent gas and necessary spare parts shall be paid separately. ii) No extra payment will be made to the contractor for machanic visit.

Comprehensive maint of water cooler of any make,any type and any capacity after disconnecting inlet, outlet drain pipe and reinstalling, connecting the same after repairing including taking out, reinstalling after repairing, servicing, cleaning of water tank and charging of refrigrent gas if required including testing, comissioning and quarterly servicing of each Water Cooler and in between period as an when required machanic will visit for minor repair such as electric connections, replacement of small size of wire, cleaning of inner tank and complete till completion of work all as specified and as directed. Note:- i) Cost of refrigrent gas and necessary spare parts shall be paid separately. ii) No extra payment will be made to the contractor for machanic visit.

Supply and fix in repair sealed unit compressor suitable for window type/split type air conditioner of 1.5 ton capacity, cutting of suction and discharge copper tubes including breezing, jointing, testing and commissioning complete all as directed. Note:- Cost of refrigrent gas shall be paid under relavent item.

Supply and fix in repair sealed unit compressor suitable for split type air conditioner of 2 Ton capacity, cutting of suction and discharge copper tubes including breezing, jointing, testing and commissioning complete all as directed. Note:- Cost of refrigrent gas shall be paid under relavent item.

Supply and fix in repair sealed unit compressor suitable for water cooler of 40/80 litres capacity, cutting of suction and discharge copper tubes including breezing, jointing, testing and commissioning complete all as directed. Note:- Gas for charging shall be measured and paid under relavent item.

Supply and fix in repair sealed unit compressor suitable for water cooler of 60/120 litres capacity, cutting of suction and discharge copper tubes including breezing, jointing, testing and commissioning complete all as directed. Note:- Gas for charging shall be measured and paid under relavent item.

Supply and fix in repair PCB (printed control board) with remote control operation and sensor for window type AC/split type AC/multi split type AC 1.5 / 2.0 TR complete all as specified and directed.

Supply and fixing in replacement of Unserviceable starting capacitor of 80-100 60-80 MFD capacity 220-240 volt including taking down old ( starting capacitor for water cooler ) complete all as directed.

Supply and fixing in replacement of Unserviceable running capacitor 220-240 volt , 50 HZ of 45-55 MFD capacity including taking down old running capacitor ( Suitable for Air conditioner / water cooler) complete all as directed.

Supply and fixing in replacement of Unserviceable contactor switch suitable for 1.5/2 TON capacity AC, any type and any make complete all as directed.

Supply and fixing in replacement of Unserviceable Over load protector,relay,capacitor for water cooler of any capacity, any type and any make complete all as directed.

Supply and fixing in replacement of Unserviceable Filter pad for 1.5/2 TON air conditoner any type and any make complete all as directed.

Supply and fixing in replacement of water cooler copper condensor coil complete with all accessories ,all as per site requirement for any capacity / any type water cooler complete all as directed.

Supply and fixing in replacement of Split AC Outdoor unit copper condensor coil complete with all accessories ,all as per site requirement for 1.5/2 TON capacity AC, complete all as directed.

Supply & fixing in replacement of rusted outdoor mounting stand set with new one for outdoor unit of Split type AC including nuts, bolts & wahers complete all as directed.

S & F Drain hose pipe for 1.5/2 TON AC complete all as directed.

S & F Swing motor suitable for 1.5/2 TON AC complete all as directed.

S & F coil Sensor and air sensor suitable for 1.5/2 TON AC complete all as directed.

Supply and fixing in replacement of Unserviceable thermostate suitable for water cooler complete all as directed.

Supply and fixing in replacement of Unserviceable dry filter suitable for Any capacity window/split type air conditioner complete all directed.

Supply and fixing in replacement of Unserviceable propeller fan blade suitable for window/split type air conditioner outdoor unit complete all directed.

Supply and fixing in replacement of Unserviceable propeller fan blade suitable for water cooler compressor unit any type and any capacity complete all as directed.

Supply and fixing in replacement of Unserviceable Chromium plated cock of 15mm dia for water cooler Push type complete all directed.

Supply and fixing in replacement of Unserviceable Chromium plated cock of 15mm dia for water cooler self close type complete all directed.

Supply and charging of gas F-22/R-32/R-134/R-290/R-600A/R-410A (freon) suitable for water cooler/window or split AC any type complete all as directed.

Supply and fixing in replacement of Unserviceable copper tube ( suction /discharge line copper tube ) for Window/split A/C of any make / type complete all as directed.

Supply and fixing in replacement of Float valve for Water cooler of existing size any make and any type complete all as directed .

Supply and fixing in replacement of Unserviceable condensor motor in Air conditioner of capacity 0.087 HP (65 watt ) / 0.08 HP(60 watt ) / 0.120 HP (90 watt), 240 volt, 50HZ (suitable for Air conditioner) & testing complete all as directed.

Supply and fixing in replacement of Unserviceable blower motor in Air conditioner of capacity 0.038 HP (29 watt ) / 0.024 HP (18 watt ) / 0.048 HP (36 watt ), 240 volt, 50HZ (suitable for Air conditioner) & testing complete all as directed .

Supply and fixing in replacement of Unserviceable condensor motor in water cooler of capacity 0.087 HP (65 watt ) / 0.120 HP (90 watt), 240 volt, 50HZ (suitable for water cooler) & testing complete all as directed .

Taking down and disconnecting existing voltage stabilizer upto 5KVA and strip opening up, single phase automatic buck and boost type with input voltage not less then 130 volts to 280 volts and output voltage 230 volts, plus or minus 2.5% replacement of unserviceable parts re-assembling complete all as directed.(Note :- Rewinding of voltage stabilizer if required will be measured and paid separately)

Re-winding power transformer of stabilizer of capacity 1 KVA to 5 KVA with super enamelled copper winding of same gauge and turns as per existing including all insulating material such as latherite paper, glass sleeves, paper insulation if required, varnishing, drying and testing complete all as directed.

Comprehensive maint of desert cooler of any make/type Cleaning / overhauling, greasing of fan motor ,fan and checking electric connection and reconnecting the electric connection complete all as directed.(Note : Items required to be replaced, over hauling & rewinding of fan motor if required will be measured and paid separately)

Dismantling fan motor of desert cooler and removing the burnt winding and Material and labour for rewinding the same with supper enamelled copper wire of existing size , gauge and turns including cleaning the slots properly, and testing complete all as directed.

Supply and fixing in replacement of Unserviceable fan blade suitable for desert cooler any type and any capacity complete all as directed.

Supply and fixing in replacement of Unserviceable khas pads/wood wool pad of required size for desert cooler of any make complete all as directed .

supply and fix repair of fan motor with blade suitable for desert cooler of any type /capacity single phase, 230 volt complete all as specified and directed.

Supply and fixing in replacement of unserviceable submersible water lifting pump for desert cooler ,240 volts,50 Hz,AC,12 watt,1.5 Metres max head and output : 800 LPH complete all as directed .

Schedule of credit amount of Rs 39,170.50 to be deducted during AOC.

M/S. HONEY CONSTRUCTIONS

Haryana EngineerService