Lot-05

Amount

Earth work in Embankment on Tatbund above 1.50m height in ordinary soil including lead upto 1.00 Km. & also i/c cost of earth, dressing, & Levelling, making profile mechanical compaction, labour, T&P etc. complete in all respect.

Construction of granular sub-base by providing Coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator , and compacting with vibratory roller to achieve the desired density, complete in all aspect.

Providing, laying, spreading and compacting stone aggregates of specific sizes (45 to 63 mm) to water bond macadam specfication including spreading in uniform thickness, handpacking, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber applying and brooming requisite type of screening and binding material to fill up the interstices of coarse aggregate, watering and compacting to required density.

Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4 to 53 mm) to water bond macadam specfication including spreading in uniform thickness, handpacking, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber applying and brooming requisite type of screening and binding material to fill up the interstices of coarse aggregate, watering and compacting to required density.

Providing and applying primer coat with bitumen emulsion SS-1 grade slow setting on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant of , laying and rolling with a smooth wheeled 8-10 tonne capacity roller, finished to required level and grades.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C seal coat.

Supplying and Laying Of M-150 Brick on edge pavement on parties with bricks laid dry joints filled with local sand including prepration of base to proper slope and its ramming, spreading Levelling layer of 1cm depth of local sand over the subgradeand including all cost of material, labour, T&P, Carriage upto 25.00 Km. and stacking at site etc. complete in all aspects.

M/S SUDHIR KUMAR CONTRACTOR