Renovation of buildings of HWS Mech. Divn. Hisar and BWS M. S/D Hisar

Amount

Removing door and windows (wood and steel) with chowkats by making Recesses in walls when the wall is not to be dismantled:- DOORS

Removing door and windows (wood and steel) with chowkats by making Recesses in walls when the wall is not to be dismantled:- WINDOW

Removing rolling, shutters including top cover, brackets and side guides etc Complete.

Scraping of cement plaster

Dismantling white or coloured glazed tiles (to be carefylly removed)

Dismantling cement conglomerate/terrazzo floors 25 mm to 50 mm Thick including concrete base

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing. DRY BRICK WORK

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work, but excluding steel reinforcement, centring and shuttering in first storey upto 4 metres above plinth level.

FE-500 EQR TMT Steel bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete.

Providing and fixing of Aluminium door and window complete in all respect as per engineer incharge

providing and fixing vitrified tiles of size 600*600m of approved make flooring

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades Size 300mm x 450mm

First class brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

11.43 cm thick brick wall laid in cement stone dust (from crusher) mortar 1:4 in superstructure.

12 mm thick cement plaster 1:4

Scraping White wash and colour wash

Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on new work, two coats to give an even shade.

Providing and fixing of P.V.C wall pannel for walls (gold series) complete in all respect

Providing and fixing of P.V.C wall pannel for ceiling (gold + silver series) complete in all respect

Providing and fixing M S angle and T-iron Frames for door, window and ventilator including iron hold fast, butt hinges of I.S.I mark fixed in positon with machine screws and duly welded including all other suitable locking arrangements provided and welded with the frame and making holes and fixing glazing clips in the frame filing the welds and finished with a coat of red lead non sotting primer complete in all respects.

Supplying openable steel doors and windows, of standard steel sections, joints mitres and electrically flash welded including provision for arrangement of receiving handles, peg stay, catcher will also be welded with the frame and providing and fixing pressed steel projected hinges, iron lugs, glazing clips (excluding wooden shutters, glazing and fittings such as handles, peg stay and catched etc.) and finished with one coat of ready mixed red lead no setting primer.

Wire gauze of 140 G or 120 G designation fixed on steel windows of standard rolled steel section, with 3 mm thick flat iron cover moulding of 12/5 mm width, fixed with machine, screws welded complete in all respects

Applying priming coat with metal primer on New steel or iron work including preparation of surface.

Painting two coats with synthetic enamel Paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint.

Terracing consisting of tiles 22.86 cm x 11.43 cm x3.81 cm, laid over 87.50 mm mud filling, on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles over a polythene film of 100 micron (0.1 mm) thickness with 25 mm thick layer of fine sand, above and below the polythene film, laid on top of R.C.C. slab, including grouting with cement sand mortar 1:3 and top surface to be left clean. Tile teracing Quarter

providing and fixing in position best indian make (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for Sinking into floor, with raised foot treads COMPLETE WITH 100 MM H.C.I, ‘P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above Size 630 mm White

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUITE, SYPHONIC TYPE, Consisting of- Single trap symphonic W.C. Suite White

providing and fixing in position best indian make LAVATORY SUITES (WITH ANTI SPLASH RIM IN VITREOUS CHINAWARE and all other necessary fittings as fully described in item no. 30.41 above. Size 510 mm x 400 mm with one no. trap.

Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Bib cock

Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) 20 MM STOP COCK Stop cock with flange.

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. C.P BRASS (Soap dish 160 mm)

providing and fixing in position best indian make LARGE FLAT BACK or Angular lipped from Urinal 610 MM HIGH consisting of:

providing and fixing in position best indian make TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC.

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. 4 Module

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. 6 Module

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. 8 Module

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. 10 Module

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. 12 Module

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. (10 amp. 1 way switch )

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. (10 amp. Socket)

3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. (Short Point)

Supply and erection of 48" dia celing fan

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. ( Fan Regulator )

Supply and erection of Fittings and Accessories.Bakelite angle / straight button holder large size.

providing and fixing of Led Bulb 9 watts ( Havells) complete in all respect up to the entire satisfaction of Engineer-In-Charge of the work

providing and fixing of Led Tube light (syska of 20 watts) complete in all respect up to the entire satisfaction of Engineer-In-Charge of the work

Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe. Light short point (251+10%)

Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe Light medium point (433+10%)

Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe Fan long point (733+10%)

Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe 3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc.

Recvery of old Door & window

Recovery of Bricks

Recovery of rolling shutters