Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹46.0 L+₹1.1 L (2.41%)Rejected-AOC | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹46.5 L+₹1.5 L (3.41%)Rejected-AOC | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹47.3 L+₹2.4 L (5.30%)Rejected-AOC | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹48.3 L+₹3.4 L (7.60%)Rejected-AOC | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹44.3 L
EMD Value
₹88,680
Closing Date
1 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR TO BLDG NO T 26 OF CORPS CAMP ADDN ALT TO BLDG NO T 75 IN M ZONE BLDG NO T 10 AND T 11 IN C ZONE UNDER BR I AT RMS
2024_MES_645553_1
8708/C/E8
Open Tender
Civil Works
Item Rate
120 days
RANGAPAHAR
Class D Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹88,680
29 Apr 2024
7 Mar 2024
3 Apr 2024
7 Mar 2024
1 Apr 2024
19 Mar 2024
7 Mar 2024 - 12 Mar 2024
Amount
Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering etc complete all as specified and as directed .
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed .
Dismantling of mild steel work of any discription etc complete all as specified and as directed .
Dismantling, floor, hearth or wall tiling including cement mortar bedding etc complete all as specified and as directed .
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar etc complete all as specified and as directed .
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level etc complete all as specified and as directed .
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed .
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) etc complete all as specified and as directed .
Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters(Without taking off shutters from the frames) etc complete all as specified and as directed . exceeding 1.5 Sqm but not exceeding 4 Sqm each
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed .
All as per item No 10.00 (here-in-before) but refixing of PPGI sheeting and labour only all as specified and directed
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed .
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper etc complete all as specified and as directed .
M&L for 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone agg as in leveling course etc complete all as specified and as directed .
M&L for vitrified floor tiles light shade of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile etc complete all as specified and as directed .
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick CM (1:4) backing coat etc complete all as specified and as directed .
S&F for rolled section as in main and cross beams , purlins , rafters where connected to common rafter and running rails etc conforming to Fe- 410-w etc complete all as specified and as directed .
All as per item No. 17.00 (here-in-before) but febrication, erection and fixing only etc complete all as specified and as directed .
M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm etc complete all as specified and as directed .
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW etc complete all as specified and as directed .
S&F factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed .
S&F polythene film, 150 micron thick laid over a coat of bitumen primer, @0.30 to 0.50 kg per Sq.m etc complete all as specified and as directed .
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed .
S&F for providing sliding type (3 Track +3 shutter) aluminium window / ventilator, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19, aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall be provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Halco extrusions etc complete all as specified and as directed . Note:- Glazing and Stainless steel wire mesh will be paid seperately.
S&F aluminium anodised grill with mesh size 75 mm and aluminium bar 6 mm XPM type including all accessories such as channels for fixing grill screws etc, aluminium section 15 micron thick anodizing etc complete all as specified and as directed .
S&F aluminium partition of specified aluminium section top rail and middle rail 2.36 Kg/RM, bottom channel 2.59 Kg/RM including aluminium beads rubber gasket and 5mm thick frosted glass in upper portion and 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination complete all as specified and directed.
M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and etc complete all as specified and as directed .
S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane etc complete all as specified and as directed .
Supply and fix stainless stelel wire cloth 0.36 nominal dia of wire and average width apperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutter etc complete all as specified and as directed .
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening etc complete all as specified and as directed .
S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site including nacessary fittings etc complete all as specified and as directed .
S & F 100 size stainless steel butt hinges etc complete all as specified and as directed .
Supply & Fixing 150 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed .
S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed .
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed .
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed etc complete all as specified and as directed .
S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed .
S & F floor door stopper of aluminium alloy body and tongue, anodised wit hard drawn steel spring, fixed in floor, overall length of cover plate 150mm etc complete all as specified and as directed .
S&F for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and as directed .
M&L for brick work with sub class 'B' bricks (using old size burnt bricks) straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 etc complete all as specified and as directed .
Material & labour for brick work with sub class 'B' bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed .
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc complete all as specified and as directed .
M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed .
M&L for preparation of new wooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer. in tint etc complete all as specified and as directed .
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint etc complete all as specified and as directed .
All as per item No 45.00 here in before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces.
M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide primer on new surfaces in any tint etc complete all as specified and as directed .
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of 3mm thick wall care putty incl preparation of surface complete all as specified and directed
M &L for preparation of old decorated surfaces of walls by complete removal of existing surfaces and applying one coat of oil bound distemper of approved shade/tint etc complete all as specified and as directed .
Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over one coat of primer complete all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge .
Material and labour for preparation of old external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint including complete removal of existing treatment all as per manufacture instructions all as specified and as directed by Engineer-in-Charge .
Taking up or down steel tubing 15mm bore and connection etc complete all as specified and as directed .
All as per item No 52.00 (here-in-before) but 20mm dia .
S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings etc complete all as specified and as directed .
S&F 20 mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings etc complete all as specified and as directed .
S&F Rotational moulded polyethylene water storage tanks double layer with cover & 20mm ball valves high pressure of PTMT with epooxy coated aluminium road & high density plastic ball (cylindrical vertical with closed top) hoisted and fixed in position incl disconecting of existing tank all as specified in SSR Part I (Capacity in litres 1000) complete all as specified and directed.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover etc complete all as specified and as directed .
S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with flush pipe 32 mm dia, inlet ball valve float and handle etc complete all as specified and as directed .
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S& F in repair vitrious china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling etc complete all as specified and as directed .
S&F in repair WHB vitreous china flat back or angle back type any size, including cutting for and pinning in ends of brackets or erecting stand PVC wash pipe and PVC connection PVC 32mm dia bore waste cuppling etc complete all as specified and as directed .
S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick, fixed to walls with plugs & CP brass screws complete all as specified and directed.
S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shqanks and flynuts, screwed for iron pipe 15mm dia etc complete all as specified and as directed .
M & L for in repair bib cock CP with wall flange, fancy type 15 mm dia bore etc complete all as specified and as directed .
M & L in repair angular stop cock CP with wall flange, fancy type 15 mm bore dia etc complete all as specified and as directed .
S&F in repair grating down 100mm dia with waste hole of PTMT (Min wt 25 gms) etc complete all as specified and as directed .
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws etc complete all as specified and as directed .
S&F in repair PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor etc complete all as specified and as directed .
S&F in repair PVC (SWR) 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floor etc complete all as specified and as directed .
S & F PVC (SWR) reducers 110 mm to 75 mm etc complete all as specified and as directed .
S & F in repairs for 75mm bore dia pipe stack clamps out of 50 mm by 5mm flat iron & 16 mm dia round iron stays, including bolts & nuts & secuirng ends of stay to wall or roof etc complete all as specified and as directed .
M&L for RCC Nominal Mix Type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and as directed .
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed .
S & F in repair stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.
Supply and fixing stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheet fixed on CP cantilever brackets, complete all as specified and as directed.
M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to IS etc complete all as specified and as directed .
M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) etc complete all as specified and as directed .
S&F 40 mm flap width of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised etc complete all as specified and as directed .
M&L for 19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame work etc complete all as specified and as directed .
Supply and fixing 0.9 mm thick decorative laminates type 1, or surface finish colour and pattern etc complete all as specified and as directed .
S & F external teak wood lipping, 6mm thick, fixed with nails complete all as specified and directed.
S&F 40 mm cupboards knobs fixed with nut screw and washer of brass polished complete as specified and directed.
S&F magnet Catcher for cub board complete all as specified and directed.
S & F in repairs for Draperly rod/Harrison rails of CP of 20 mm dia with fixing brackets, Stops rollers and rings etc complete all as specified and as directed .
M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M & L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregates) as in surface channels and drains etc complete all as specified and as directed .
M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement etc complete all as specified and as directed .
M&L for chequered cement concrete tiles 300x300x25mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out (Soft/loose soil) etc complete all as specified and as directed .
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point (Soils) etc complete all as specified and as directed .
Excavation in trenches n. exc 1.5 M in depth for foundation etc and getting out in soft /loose soil etc complete all as specified and as directed .
M&L PCC Cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and as directed .
Returning filling including watering, ramming in layers n. exc 15 cm thick etc complete all as specified and as directed .
Form work to sides and soffits of roof beams, lintels cantilevers etc complete all as specified and as directed .
Form work to edges of concrete slabs exc 10 cm but not exc 20 cm thick etc complete all as specified and as directed .
All as per srl item here-in-before but 17mm dia as in stirrups etc complete all as specified and as directed .
M & L for RCC (Nominal Mix) Type A-1, (1:1.5:3) (using 20 mm graded stone agg)as in beams etc complete all as specified and as directed .
S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc complete all as specified and as directed .
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long etc complete all as specified and as directed .
M&L for Non Skid Glazed ceramic coloured (light colour as approved) tiles of size 300x300x7-8 mm thick as in flooring set and jointed in neat cement slurry laid over & including 15 mm thick screed in cement mortar (1:6) as in floors/ sub floors and pointed in white cement or coloured cement to match the colour of tiles etc complete all as specified and as directed .
M&L for 100mm thick cement concrete work (1:4:8),Type D-2 (using 40 mm graded stone agg) as in sub base for floor, using 40mm graded stone aggregates complete all as specified.
M&L Brick hardcore of gauge n.exc 63mm deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to true surface
M&L Rendering 15 mm thick cement plaster in CM 1:4 on roof surfaces/wall with water proofing compound finished even and smooth without using extra cement complete all as specified and directed.(WPC shall be measured &paid seperately)
Supply only integral water proofing compound complete all as specified.
S&F sinks made of stainless steel 1 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mmx330mmx160mm
S&F 110 mm bore PVC (SWR) bends of any radius with access door including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.
S & F 110 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.
S & F 75mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.
S & F PVC (SWR) Bend any radious of 75 mm dia etc complete all as specified and as directed .
S & F PVC (SWR) Junction (Single 'T' ) equal or un equal of 75 mm dia complete all as specified and directed
M & L PVC (SWR) Gully traps125/110 mm setting and jointing with solvent cement etc complete all as specified and as directed .
S & F PVC (SWR) Vent Cowl 75mm dia complete all as specified and directed
S&F PVC floor traps 75 mm outlet with grating incl jointing with solvent cement etc complete all as specified and as directed .
S&F vitreous china wash down water closet pan pedestal pattern white (excl fixing bolt flushing cistern and flush pipe ) fixed complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.
S&F PVC 10 ltr. Capcity valveless syphonic action type, flushing cistern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc with all neccassary fittings etc complete all as specified directed.
S&F in 15 mm size PVC connections with PTMT nuts of 450 mm long etc complete all as specified directed.
S&F Wash hand basin flat back 550x400mm vitreous chine (white) with cantilever brackets embedded in concrete block including the fiollowing and fixed in repairs etc complete all as specified directed. (a) Brass chromium plated waste coupling 32mm bore size (b) Waste pipe PVC 32mm bore one RM (c) Angle iron/cast iron brackets (d) CP Fancy type pillar cock 15 mm dia
M&L Soap shelf, PVC white/colour appx size 450 x 125 x 40mm (as per sample)etc complete all as specified and as directed .
S&F in repairs CP toilet paper holder etc complete all as specified and as directed .
S&F Bib taps,CP, fancy type screwed for 15mm bore of iron pipe or for brass ferrule and fixed etc complete all as specified and as directed .
S&F Stop valves, fancy type, CP with long shank and cup ( concealed typee ), screwed both ends for 15mm bore of iron pipe or for union and fixed etc complete all as specified and as directed .
S&F Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed .
S&F shower rose 125mm CP with long shank fixed to 15mm bore of iron pipe etc complete all as specified and as directed .
S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore of iron pipe or for union and fixed etc complete all as specified and as directed .
S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore of iron pipe or for union and fixed etc complete all as specified and as directed .
S&F towel rail CP 20mm dia D-type 60 cm long between flanges and fixed in position complete all as specified.
S&F 450mm long MS powder coated peg set of 5 or 6 etc complete all as specified and as directed .
S&F of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capesity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe complete all as specified and directed.
Excavation over areas n.exc 1.5m deep & getting out soft/loose soil etc complete all as specified and as directed .
Excavation over areas exc 1.5m deep & n.exc 3 m deep and getting out in soft/loose soil etc complete all as specified and as directed .
Excavation over areas exceeding 3m deep but not exceeding 4.5m deep and getting out in soft/ loose soil etc complete all as specified and as directed .
M&L for PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in channels of man holes etc complete all as specified and as directed .
M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in band coping bed plate, benching etc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed.
M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells etc complete all as specified and as directed.
M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells etc complete all as specified and as directed.
M & L for RCC M-20 (Nominal Mix) Type A-1, (1:1.5:3) (using 20 mm graded stone agg) in foundation, column footing, including rafts, foundation beams and plinth beam etc complete all as specified and as directed.
M & L for RCC M-20 (Nominal Mix) Type A-1, (1:1.5:3) (using 20 mm graded stone agg) as in column. Piers, pillars, posts and struts etc complete all as specified and as directed.
Material and labour for brickwork in cement mortar 1:4 with sub class `B' bricks(using old size burnt bricks) in one brick thick honey comb walling,etc complete all as specified and as directed.
M&L for 15mm thick cement plaster in cement mortar (1:4) on brick or concrete surface mixed with water proofing compound as per manufactures instructions, finishing the surface even and smooth without using extra cement etc complete all as specified and as directed.
M&L for Precast RCC (1:2:4) type B-1(using 20 mm graded stone aggregate)as in manhole/soack well/septic tanks slabs/covers etc including necessary form work complete set in cement mortar 1:4 etc complete all as specified and as directed.
M&L for DWCPE (SN8) 150 mm (ID) diameter Pipes laid in trenches complete all as specified and directed.
M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 etc complete all as specified and as directed.
M & L for formwork to sides of square, rectangular or polygonal pillars, posts, columns,struts and piers for rough finished surface of concrete etc complete all as specified and as directed.
M & L for formwork to sides of RCC / PCC bands in circular walls horizontal or sloping and similar work for rough finished surface of concrete etc complete all as specified and as directed.
Material and labour Reinforced cement concrete (Nominal Mix) in cement concrete (1:1.5:3) type A-1 using 20mm graded stone aggregate as in cover slabs of drains, manholes, septic tanks, soakage wells etc. complete all as specified & as directed by Engineer-in-charge. Note: - Reinforcement shall be measured and paid for separately.
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc complete all as specified and as directed.
Taking down shutters of any description not exceeding 1 Sqm each etc etc complete all as specified and as directed.
Dismantling boarding of any description and fixed in any position fixed with nails or screws etc complete all as specified and as directed.
M&L, providing Kota stone slab 20 to 25mm thick machine cut and mirror polished to size and fixed in floor and set and jointed in neat cement slurry and pointed with grey cement to match the stone floor/steps treads laid over 20mm thick screed bed in CM 1:3 complete all as specified and directed.
M&L, providing Kota stone slab 20 to 25mm thick machine cut and mirror polished to size and fixed in wall and set and jointed in neat cement slurry and pointed with grey cement to match the stone over and including 10 mm thick rendering in CM 1:4 for laying in vertical surfaces complete all as specified and directed.
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in white coloured cement to match the shade of tiles etc complete all as specified and as directed.
S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc complete all as specified and as directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed etc complete all as specified and as directed.
M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A etc complete all as specified and as directed.
S &F 35mm thick factory made 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.23 (a) etc complete all as specified and as directed.
M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed.
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and as directed.
M&L for preparation of new surface of wall and applying three coats of white wash etc complete all as specified and directed
Supply and fixing in repairs vitreous china squatting pan water closet,Orrisa pattern of size 580mmx440mm white with integral foot rests excluding flushing cistertn and flush pipe etc complete all as specified and as directed.
S&F in repair brass chromium plated shower rose with swivel joints, etc complete all as specified and as directed.
S & F 4mm thick Plain mild steel wire, galvanised class 3, in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. fixed in repairs complete all as specified and directed.
S&F Non skid ceramic light coloured floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0..18 sqm but n.exc 0.38 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles etc complete all as specified and as directed.
M&L for PCC 1:2:4 type B-2 100mm thick (using 20mm graded stone agg) as in finishing surfaces of concrete topping even and fair (without using extra cement) of floor etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 75mm thick (using 40mm thick graded stone agg) as in sub base of floor etc complete all as specified and as directed.
M&L for chequered cement concrete tiles 300x300x25mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments etc complete all as specified and directed.
M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in surface channels and drains etc complete all as specified and as directed.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint etc complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface etc complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site etc complete all as specified and as directed.
(a) One light/Fan point controlled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No- 173.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.
Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories and sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge
(a) One light point controlled by one, one way switch .
(b) One Ceiling fan/ exhaust fan point controlled by one, one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin socket outlet 5 Amps on the Independent board.
(e) One bell point controlled by one, one way switch .
All as per item No- 181.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module etc complete all as specified and as directed.
M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed.
M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed.
M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed.
M&L for modular Bell push 1 Way 6A 1 Module etc complete all as specified and as directed.
M&L for bell AC 230 volts musical type etc complete all as specified and as directed.
M&L for Modular Fan step regulator, 120W - 2 module etc complete all as specified and as directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors FRLSH quality, 1100 volts grade, drawn through and including non metalic rigid PVC conduit with all conduit accessories (including concealing and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface) complete all as specified and as directed. NOTE:- two runs of 6.0 Sq mm + one run of 6.0 Sq mm and one run of PVC Conduit and its accessories of suitable size shall be measured as one unit length.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size etc complete all as specified and as directed.
Taking down S&F for , LED Light fitting 1 x 20 watt (4 Ft), basic all purpose surface and wall mounted LED battern with polycarbonate housing & intergrated electric driver with all accessories incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Geaves Cat No -CCS-102-20-65-SL-DP-NWH/ Bajaj/ Philips.
All as per item No- 193.00 here-in-before but LED Tube light 10 Watt (2 ft) complete all as specified and as directed.
Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge..Make : CG, Cat No- LSTS-20-CDL-M/ Bajaj/ Philips
Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
Supply and fixing for LED lamp 9 Watt suitable for lamp holder complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed. Make : Legrand Cat Part No 507611/ABB/Siemens
Supply and fixing MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning MCB DB incl taking down old unsv MCB complete all as specified and as directed
Supply and fixing MCB SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning MCB DB incl taking down old unsv MCB complete all as specified and as directed
Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning MCB DB incl taking down old unsv MCB complete all as specified and as directed
Supply and laying tubes Medium grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 15 mm dia bore including complete all as specified and as directed.
S&F Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and as directed.
S&F 15mm bore Bib tap fancy type chromium plated with long shank etc complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc complete all as specified and as directed.
Taking down Ceiling fan/ Exhaust Fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 25 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
All as per item No 208.00 but 16 Sqmm 2 Core complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed.
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 32 mm dia bore including taking out unsv GI tubing complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable.
M/S DEEKSHA ENTERPRISES
M/S MUGHATOLI AYE
M/s K P Enterprises
M/S VIKASH TRADERS
PERFECT BUILDERS AND SUPPLIERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .