GE (N) P/TOKEN- 36 OF 2020-2021PROVISION OF CERTAIN SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (NORTH) PUNE

Amount

Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in and including 15mm thick cement mortar (1:4) backing, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges including dismantling of existing stone slab/ tile complete all as specified and as directed.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single executed process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Supply and fix factory made solid PVC Moulded Door Shutter, 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm x 20mm (19 gauge) for top rail, bottom rail and in styles with 2,4, or 6 raised panel design with 5 mm thick Moulded Prelam PVC Sheet on the front face & 5 mm thick prelam PVC plain sheet on back face, inside core shall be of PVC soild board of 20mm thick, door shall be provided with 20mm thick PVC lipping all around the edges, supplying & fixing in frame at site as per specification & drawing given in MES SSR part -I and II. Note: All screws shall be self tapping chromium plated screw not less then 50mm long.

Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 33 to 35mm thick consisting of frame made up of MS tube of size 25mm X 25mm (19 guage) for top & bottom rail, and in styles. Single piece plane coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 20mm thick struck inside with solvent cement. Plane colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC board 22mm to 25 mm thick solid core board . Panel shall be of wire gauge stainless steel wire cloth 0.36mm nominal dia of wire and everage width of aperture 1.4mm, stainless steel wire cloth shall be covered with aluminium XPM in rhombus shape in one piece from top to bottom rail, fixed with self tapping screw not less then 38mm long complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel butt hinges 100mm medium weight all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as directed and specified.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps 30mm (when open) complete all as specified and as directed .

Supply and fix, 150mm, mild steel, ordinary rat tail rod pattern spring (helical door spring) including roller and roller plate complete all as specified and as directed.

S&F in repairs brass chromium plated single towel rail 18" long including built in side brackets ,Cat No. AEC-1111B of make Jaquar or equivalent of Make CERA, Prayag and as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fix for pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Supply and fix for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Supply and fix in repair for aluminium anodised powder coated louvered ventilator using Jindal or equivalent make aluminium section rectangular tube of size 63.5mm x 52mm x 1.5mm including glass 4mm thick ordinary quality frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc. complete all as specified and directed.

Supply and fix for aluminium anodised three track sliding window with two glazed shutters, one shutter with and including 4mm thick tinted glass of modiguard and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

M & L machine cut polished cudappah stone slab 20-25mm thick as in lintels, shelves, partitions, cooking platform below granite stone and the like over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including making good disturbed surface complete all as specified and as directed.

Material and labour 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded broken stone aggregate) as in sub base floor finishing the surface even and fair complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured double charged vitrified ceremic tiles 10mm thick (square/ rectangular) polished, area of each tiles exc. 0.18Sqm and not exc. 0.36Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour for coloured, double charged, vitrified ceramic tiles, polished of area of each tiles exc. 0.18Sqm and not exc. 0.36Sqm, 10 mm thick as in skirting/dado, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces wall finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for preparation of old decorated surfaces ceiling and applying one coat of dry distemper complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound/ emulsion distemper over a coat of priming paint and white cementitious wall care fine putty 1 to 1.5mm thick complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls, preparation of surfaces and make the surfaces free from loose particles, oil stains etc., preparing surfaces, applying putty where required and applying two coats of oil bound/ emulsion distemper over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

M & L for preparation of external surfaces of walls, cleaning and appying two coats of chemical water proofing treatment on wall, chajja, terrace and parapet walls, grooves etc. complete all as per manufacturer instructions, as specified and as directed by Engineer-in-Charge. Make: Chemistik PU 50 (Heavy duty PU waterproof coating) or equivalent of Pidilite Industries Ltd DR Fixit, FOSROC as approved by GE

Supply and fix 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion ' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs brass chromium plated quarter turn wall mixer with provision for overhead shower complete with wall flange with 115mm long bend pipe on upper side, connecting legs Cat No. FUS-29273 UPR of make Jaquar ‘FUSION' Series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs sink cock swan neck, wall mounted model with swinging spout with wall flange Cat No. APR-101347N of make Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs for brass chromium plated, overhead shower rose 100mmX100mm (4"x4") Square Shape (without arm) complete all as specified and as directed. Cat No.F7020307 of make Cera or equivalent of makes as per Appx 'A' as approved by GE

Supply and fix in repair cast copper alloy chromium plated overhead shower arm 305mm(12") long square shape with flange (for wall mounted shower) complete all as specified and as drected. Make: Cera Cat No. F7040202 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs brass chromium plated quarter turn two way bib cock with wall flange 15mm dia Cat No. FUS-29041 of make Jaquar ‘FUSION series or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repair for hand shower, chromium plated (health faucet) of ABC body 1.0 metres long easy flexible tube in chrome finish and wall hook all as per Cat No. ALE-ESS-585 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.

S&F in repairs stainless steel toilet paper holder, Cat No. AEC-1151 of make Jaquar or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix in repairs for brass chromium plated soap dish (Polycarbide), fixed with brass CP screws, complete all as specified and as directed. Make Jaquar Cat No.AEC-1133 or equivalent of make as per Appx 'A' as approved by GE

S&F in repairs brass chromium plated towel ring round, Cat No. AEC-1121 of make Jaquar or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix in repairs for 15mm dia bib cock standard (old handle) without flange of PTMT any colour high pressure screwed for iron pipe all as per Cat No.121-0 (Standard Series) of make Prayag or equivalent of makes as per Appx. 'B' as approved by GE complete all as specified and as directed.

Supply and fix in repair for 15mm size PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed. Make: Prayag Cat No. 323-Z or equivqlent as per Appx 'A' as approved by GE

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors including taking up/down CI pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls including taking up/down CI pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors including taking up/down CI pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls including taking up/down CI pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 110mm bore including taking down CI bend complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 75mm bore including taking down CI bend complete all as specified and as directed.

Supply and fix for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe including taking down CI branch complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door including taking down CI T complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 110mm bore pipes with access door complete including taking down CI T all as specified and as directed.

Supply and fix in repair for PVC (SWR) floor trap 75 mm dia of outlet, plain with CP grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) including taking up CI trap complete all as specified and directed

Supply and fix in repair for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with 100mm bore CI 'P' trap long arm of length upto 700mm as per site requiremen, front or back inlet and foot rests any pattern including 32mm dia PVC flush pipe and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. including making good to floor complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections, PVC jet, PVC connection 450/600mm long with PTMT nuts and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair for vitreous chinaware wash hand basin with pedestal, white, flat back, size 550x400 mm including pillar tap, fancy type , cast copper alloy, with capstan heads, chromium plated, cast copper alloy, screwed down high pressure, with or without lettered 'Hot' or 'Cold' and fly nuts screwed for iron pipe for 15mm bore, CP waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of required length and all necessary inlet outlet connections including CI brackets complete all as specified and as directed.

Supply and fix for stainless steel sink made of Stainless Steel, 1mm thick with drainage board made of 1mm thick sheet, with plug, washers and waste coupling, 32mm dia. waste pipe, CP grating including bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 915 mm x 460 mm with bowl size 410mm X 330mm X 160mm all as specified and directed.

Supply and fix for PVC cabinet with 4mm thick looking mirror, single shutter of size 440mm X 600mm x150mm complete all as specified and as directed. Make: Parryware Cat No. C846M46 or equivalent as per Appx 'A' as approved by GE.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit including removal of batten/ conduit/ gutties/ wooden boards/ switchs/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, regulatorr, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as directed.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy grade ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.78 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.78 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.78 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.78 here-in-before but point wiring for one light point controlled by two, two way switchs 5/6 Amps.

All as per serial item No.78 here-in-before but point wiring (for ceiling portion through and including heavy duty ISI marked, PVC casing and capping including all accessories) for one ceiling fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.78 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

All as per serial item No.78 here-in-before but with FRLS copper conductor 4Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 4Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing caping including all accessories fixed to walls/ ceilings etc., with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.86 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.86 here-in-before but point wiring for one 3 pin 5/6 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.86 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

All as per serial item No.86 here-in-before but with FRLS copper conductor 4Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 4Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate, brass terminals suitable for batten/ slanting fittings complete all as specified and as directed.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module complete all as specified and as directed.

Supply and fix for modular switch, two way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular bell push, 6Amps, 1 module complete all as specified and as directed.

Suply and fix for bell electric suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Suply and fix for bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular step type electronic fan regulator flush type 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Fixing only for modular step type electronic fan regulator 2 module obtained serviceable from item No. 75 complete all as specified and as directed.

Supply and fixing for TV socket complete all as speccified and as direceted

Supply and fix for sheet metal enclosures single pole and neutral with a two pin and earth plug top and socket complete with one MCB DP 20 Amp complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 63Amps, 415Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Refixing only old serviceable MCB SP/ SPN/ TPN of any capacity obtained from Item No 76 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire etc. complete all as specified and directed.

Refixing only old serviceable MCB DB SPN/ TPN of any capacity obtained from Item No 76 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire etc. complete all as specified and directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body complete all as specified and as directed.

Fixing only for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body obtained serviceable from item No. 75 complete all as specified and as directed.

Supply and fixing die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 10 Watt LED lamp including lamp complete all as specified and as directed Make- Jaquar Cat No-CWLL01V109XX or equivalent

Supply and fixing ceiling/ wall surface mounted round LED down light with PC housing suitable for 10 Watt LED lamp including lamp complete all as specified & as directed. Make- Jaquar Cat No-LVOL01R010XW or equivalent of Bajaj, Havells, Philips

Supply and fixing 22 Watt LED fitting high quality design PC Batten with decorative end caps complete all as specified and as directed. Make- Jaquar Cat No-LGLZPCX022XW or equivalent

Fixing only serviceable batten energy efficient tube light luminaries, obtained from Item ser No 75 here-in-before of any capacity & size, 230Volts including provision of PVC insulated sheathed round flexible wire with multistranded copper conductor of size 0.75 Sqmm , 3 Core 110 Volts grade , from light fittings to ceiling rose complete all as specified and as directed.

S&F ceiling fan (after assembling the same) with fan hook/box, 1200mm sweep BEE 5 star rated, 3 blade ISI marked, white colour, 240 volt AC 50 HZ single phase with hanging rod, conopy set, clamps, bolts nuts and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat No. ES-50 or Bajaj cat No. Kessals 50 ISI of equivalent of Usha, Orient Electric kiara shine, Crompton.

Hanging only ceiling/ exhaust fan and connecting including provision of flexible PVC copper conductor cable of size 23/0.0076 twin core from ceiling rose or connecter to fan including taking down fan complete all as specified and directed.

S&F for wall mounted fan of size 400mm sweep 3 blade, 3 No. speed, 240 volt AC 50 HZ single phase 1320RPM motor speed double string and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connecter to fan complete all as specified and directed. Make: Bajaj, Usha, Orient, Crompton, Havells.

Supply and Install storage type electric water heater with high precision precalibrated thermostat, safety valve, preset thermal cutout, fire retardant power cord, ultra thick stainless steel inner tank, rust and shock proof ABS outer body non ferrous pressure plate compact and easy to install colour changing indicator , copper heating element of Cap 25 Ltr with rated wattage 2 KW , 230 Volts 50 Hz of Temp range 35º C to 75º C working pressure 0.8 mpa including inlet and outlet connection PVC flexible pipe complete all as specified & as directed

Supply and fixing of exhaust fan metal body of 300mm sweep, 1400 RPM, 01 No. speed set, 220/230V, AC single phase, heavy duty including metallic louvers and shutter and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Bajaj Bahar or equivalent of Orient, CG

M&L for cutting and making hole into or through cement concrete or stone/ brick masonry wall of thickness upto 45 cm and in girth 45 cm for fixing exhaust fan of size 300mm sweep & providing fasterner grouted in wall four nos inside for fixing of exhaust fan and four nos outside for louvers and redressing the surface and making smooth with cement plaster 1:4 to match existing surface including lime white wash all as specified and as directed.

Disconnecting water and electric connections from existing position of geyser capacity 25/50 Ltr, taking down geysers fixed to walls at any height , cleaning , servicing as directed by Engnr-in- Charge and fixing in existing position complete all as specified and as directed.

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLSH copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with four runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 10.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including two run of single core PVC insulated 10.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Four runs of 10.0 Sqmm, two run of 10.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 10.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 10.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 10.0 Sqmm, one run of 10.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

J P ASSOCIATES

Suchit constructions