Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.7 LAccepted-AOC 68 BANK COLONY SUNDER NAGAR PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹23.3 L+₹39,267.05 (1.72%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹23.4 L+₹57,122.75 (2.50%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹24.5 L+₹1.7 L (7.23%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹24.7 L+₹1.8 L (7.98%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
18 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) PATHANKOT
GE (SOUTH) PATHANKOT
CERTAIN REPAIRS TO MD ACCN INCLUDING TOILET BATHROOM KITCHEN AND MISC WORK IN OTM ACCN AT VAJINDER VIHAR UNDER GE SOUTH PATHANKOT
2023_MES_633755_1
GES/PKT/T-43/2023-24
Open Tender
Construction Works
Item Rate
180 days
GE (SOUTH) PATHANKOT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (SOUTH) PATHANKOT
₹70,000
Yes
29 Feb 2024
20 Dec 2023
20 Jan 2024
20 Dec 2023
18 Jan 2024
4 Jan 2024
Amount
M&L for PCC 1:5:10, type E-2 using 40mm graded crushed stone aggregates aggregate, as in sunken floors and mass concrete all as specified & directed.
M&L for Rendering 15 mm thick in cement mortar 1:2 and mixing with WPC 3% by weight of cement complete.
Taking down chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.
Taking down chowkhats of frames ex. 1.5 and n.exc 4 sqm with shutters (without taking off shutters from the frames) all as spd.
Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats all as specified.
All as per ser item No 06 above but size of frame 125 x 60mm complete all as specified & directed.
S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.
S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire mesh etc sizes of members as per clause 8.20(a) of SSR Part-I complete all as specified and directed incl 300 mm long rat tail rod pattern spring 01 Nos each door, 2 Handle 125 mm long and 2 Nos tower bolt and one sliding bolt 250mm long in each door
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life)
S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face incl 2 x tower bolt of sie 125mm and 2 x handle of size 125mm, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
S&F for Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass glazed shutter, wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & pattern shown in drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2.
S&F for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm complete.
S&F for glavinized mild steel wire cloths 0.56mm nominal dia and average width of apreture 1.18mm & fixed with tint tacks or glavinized wire staples all as specified.
S&F in repair sheet glass 3.00mm thick ordinary quality and glazing with oil putty and pins in square n.exc 0.50Sqm in each panes.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge.
S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg (+-5%) manufactured by ISO 9001-2015 certified company the sheet should be 100% water proof termite proof, fire retardent, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete including all fittings like handle, beading and catcher etc as per direction of Engineer-in-charge.
S & F for Continous (Piano) type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as specified and directed.
S&F for hasp and staple aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate and fixed with screw complete,
S&F in repair Bib taps fancy type chromium plated with long shank with crutch or butter fly handle high pressure screwed down screwed for iron pipes of bore 15mm complete.
S&F in repair 15mm bore stop cock (concealed type), chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe ISI marked.
S&F in repairs swivel shower of PTMT any colour for fixing with 15 mm pipe incl shower arm 15 mm size complete all as specified.
S&F in repair 15mm bore stop valve/angle valve chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe ISI marked.
S&F, PVC connection 15mm bore size with two nuts and washers of length 450mm.
S&F in repair chromium plated tublar towel rail 20mm dia D type 60cm long between flanges.
Supply and fixed in repair Rotational moulded polyethlene water storage tanks of capacity 500 litres ( IN TWO LAYER) (cylindrical vertical with closed top) hoisted and fixed in position including necessary G I fittings, inlet/outlet washout, overflow pieces long nipples, PVC Ball valves 15/20mm bore high pressure of PTMT incl aluminium rod and plastic ball checknuts & washer etc complete all as specified & directed.
Taking down old eaves gutters and rainwater pipes (any size or pattern), including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store.
S&F PVC (SWR) pipes single sockets in any length with rubber ring joints fixed to walls as a rain water pipes, 110mm bore with cement joints complete all as specified and directed.
S&F PVC (SWR) shoes of 110mm bores complete all as specified and directed.
S&F PVC (SWR) bends of 110mm bores complete all as specified and directed.
S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.
S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.
S&F for 75mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.
Taking up or down GI pipe 20 mm bore and connection, including cleaning for refixing or removal unserviceable pipe from the site.
Taking up or down GI pipe 15 mm bore and connection, including cleaning for refixing or removal unserviceable pipe from the site.
S&F in 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls.
S&F in 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls
CP Soap dish, any type, fixed to plugs with chromium plated brass screws
Vitreous China squatting pan of orissa pattern, size 580x440mm white with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (excluding supply but including fixing of flushing cistern and flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.
S&F in repair 10 litres PVC low level flushing cistern(white) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling fixed.
S&F in repair for vitreous china WHB, size 550 mm X 400 mm (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand etc including fixing of supply, 15 mm CP pillar tap and waste pipe complete.
S&F in repair fancy looking mirror of size 450x600mm complete all as specified as directed by Engineer-in-Charge.
S&F sinks with drainage boards made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed.
Granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and marble dust (1:2) with admixure of pigment to match the shade of granite stone in CM 1:4 including cutting and polishing including 15mm thick screed bed or bedding layer of CM 1:4 of mortar for laying on platform or concrete surface etc complete all as specified & directed.
75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregates as in plinth protection in panels including finishing the surfaces even and fair complete all as specified & directed.
Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc .
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 .
All as per item 48 above, but except bricks.
Taking down cement plaster and M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and prepaing of surface and applying two coat of Cement base Paint complete all as specified.
Taking down cement plaster and M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and preparing the surface and applying two coat of Oil bound distemper complete all as specified.
Taking down cement mortar and M&L for Rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and preparing the surface and applying two coat of white wash complete all as specified.
M&L Preparing old plastered surfaces of wall and applying one coat of cement base paint on walls complete.
M&L for one coats of white wash on old plastered surface, as in ceiling including preparation of surfaces all as specified & directed.
M&L for one coats of white wash on old plastered surface, as in wall including preparation of surfaces all as specified & directed.
Complete removal of existing treatment from internal surface of wall by brushing with wire brushing and washing, rubbing down and stopping of surface complete and M&L for preparation of surfaces by leveling/edging of the disturbed planes/edges of old /new plastered surfaces of wall by using wall care putty of 1 mm thick on vertical surfaces to true vertical and horizontal lines of bricks/ concrete walls finish to even and smooth complete.
M&L for preparation of existing wall and applying one coat of asian primer over two coat of oil bound distemper on walls surfaces complete all as specified and directed
Dismantling of wall tile incl cement mortar bedding & M&L providing glazed ceramic coloured wall tiles of ordinary quality size 450x300mmx7mm thick, set jointed in colour cement to match over 10mm thick rendering in CM 1:4 all as specified.
Dismantling of floor tile incl cement mortar bedding (but not backing) & M&L non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:6, complete all as specified.
Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises ,M&L Ceramic colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc.set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles over 15mm thick screed bed in cement mortar 1:4 all as spd.
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thicknss (below or above ground level) complete.
M&L for providing 75 mm thick, PCC 1:3:6 type C2, using 40mm graded stone aggregate as in sub floors complete all as specified and directed.
M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300x10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 included demolition/dismantling old surface/tiles complete all as specified and directed.
S&F in repairs 25mm dia stainless steel curtain rod fixed with stainless steel brackets & ornaments end cap fixed with screws,gutties etc design/ shape approved by Engr-in-charge complete all as specified and directed. .
S&F Vitreous china urinals,half stall (back or corner wall type) with urinal spreader,complete including waste CP coupling and waste pipe providing and fixing plugs,bedding urinal against wall in cement mortar 1:2,securing urinal to plugs with and pointing around urinal back in cement.
S&F in repair bib taps/angle valve, stop cock, Pillar tap, standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified
Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness at any height, including cover fillets, Providing and fixing tiled flase ceiling of size 595x595 mm incl of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm matel grid of hot dipped galvanised steel sections (galvanised @120gms per sqm both side incl) consisting of 3600mm long main "T" of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell be 0.25mm thick. PPGI wall angle is fixed aling the perimeter of ceilings to walls, partition or columns etc with rawl plug and wooden secrews at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm long dash fatners, 6 mm threaded rod with bolt for hanging arrangement of ceiling at max 1200 mm center to center along main T and not more than 150mm with slipped joints, the last hanger at the end of each main runner should not be greater than 600mm from adjecent wall. than 1200mm long cross T is interlocked between the main T at 600 mm center to center to form at grid 1200x600mm and than secondary cross of length 600mm is interlocked at middle of 1200x600mm grid to form grids of 600mmx600mm . cross T at the ends having length more than 600mm are to be supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x7 to 8mm thick tiles having light refectors of >=75% are placed in the grid incl dismentling of wall and ceiling board (fiber, pulp, insulation, etc) or insulation boards/ slabs/ blanket, any thickness complete all as specified and directed.
M&L for remove all loose gravel cement mortar, dirt, oil, grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminous material manually and with heal torch gun to get smooth plain finished surface with no loose material including rendering 15mm thick on existing surface to receive tar felt LM . Repair all joints & cracks with highly elastic bituminous cold applied putty tarplasic having penetration after setting upto 8mm Levelling of surface to give proper slope will be done as per site requirements with Shalipatch cold applied, Bituminous Motor & Cold emulsion cum waterproofing liquid Shalikote T-10, Created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make of approved by GE mixed with portable water in the ration of 1:1 and apply @ 400gm per Sqm (As per surface conditions). Apply first coat of Tarfelt LM or equivalent make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no dilation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. * Lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. * Allow the first coat to dry for 10 to 12 Hrs. * Apply 2nd coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller. * Allow it to dry for 10-12hrs after apply 3rd coat with consumption @ 700gm per Sqm.
Taking down of old PVC wall panelling, preparation of surface, S&F solid PVC Wall panelling consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications complete all as directed by Engineer-in-Charge
Taking down of old PVC sheet fillets, S&F 5 mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as directed by Engineer-in-Charge
S&F 35mm thick HDF prelaminated (Wenga/Teak coloured ) moulded shutter PUF(Poly urathane foam )ninsuation with minimum density 40Kg/Cum filled in between two HDF sheets of thickness 3.2mm both & border covered with 10mm thick PVC sheet incl 2 x aluminium tower bolt, 2 x aluminium handle each sie 150mm and 1 x Sliding bolt of 250mm long as per Drg No. CEPZ/TD-378/sheet 1/1 dated 27/12/2011 complete all as specified and directed.
S&F 35mm thick single piece factory made wire gauge door shutter of (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of MS tube 19 SWG size 19 x 19mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete incl 2 x aluminium tower bolt and 2 x aluminium handle of sie 125 mm as per Drg No.CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings,M&L Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws and overlap with sufficient laps complete all as specified and directed by Engineer-in-Charge.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings,M&L pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws complete all as specified and directed.
M&L steel work in tublar trussed incl special shaped washers etc complete using ERW or induction butt welded tubes conferming to IS 1161-1979 gde St -240 incl purlines complete all as specified and directed.
steel work in plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) Forming holes with riveted,bolted,or welded attachments complete all as spd and directed by eng.in.charge.
Dismantling of timber scantling incl trusses
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per sqm incl 10mm cement plaster in CM :3 on existing surface. Complete, Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermply non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)
M&L for Sand filling under floors or in foundations including watering and consolidation including Spreading and levelling in layers n exc. 25 cm thick
M&L for machine pressed precast interlocking paver block with grey cement and no pigment, factory made, any shape and size as directed (any colour as directed by Engineer in charge), confirming to IS-15658-2006 of 60 mm thickness, made out of M-35 grade of concrete all as specified and directed.
Chequered cement concrete coloured, table vibrated chemical coated, tiles 300mm x 300 mm x 25 mm thick table set and jointed, pointed in neat cement slurry with grey cement and no pigment as in floor,Screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed.
Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.
M/S NAYYAR CONSTRUCTION COMPANY
V K Sharma and Sons
M/S BISHAN DASS AND SONS
M/S Ajay Kumar Mahajan
M/S CHAMAN LAL GUPTA
Hans Raj Pooni
Jay Ann Construction Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .