Supply and installation of decorative pole, street light and high mast pole at Site-C Surajpur, Site-5 Kasna Site-4, Surajpur GB. Nagar with 03 years AMC (Vending Zone Truck Lay Bay, Decorative Area).

Supply & Fixing of 4.0 Mtr. long Decorative Ornamental Pole duly PU (Poly Urethane) Painted made of high tensile GI Steel Pipe.The Top section of pole must have Cast Aluminum Embellishments through out the length. Base Plate size 350x350x12mm with PCD of 350mm. Foundation bolts set of M16x450mdeoorative pole made of Mild Steel with a total height of 4mtr above ground level with single arm bracket of ornamental decorative street light 60W and predefined laser cut pattern in house laser machine in the top portion of the bracket of the pole as per design. Pole bottom base section shall be 220x220x1000mm, 2mm thiclmess column with three side predesigned laser cut and illumination. the surroundings in 20W with notioeable mode, top section pole of 90x3000x3mm & top bracket with laser cut pattern design one side of IOOOmm to hold the street light of 60W as per shared drawing. The base plate of pole shall be of size 350x350x10mm. Provision for inside termination box with 4way connector & Inoa 6 AMPS MCB for local isolation. Light fixture shall be made of aluminium of size 600x580mm of street light distribution of 60W for area lighting. Light output of souroe is more than 110lm/ watt, CRl>80, SPD 4k, operating voltage 140-270V. Fitting is IP65, wired with Branded LED and constant current driver. Proper thermal management for longer life of fixture. Led burning of 50,000 hours. The pole is coated with UV stabilized powder coat and cured in in-house powder coating machine. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all aooessories & foundation bolts. mx 4 Nos made of EN8 grade steel should be used only for erection. A lockable door of suitable size should be provided at bottom section for termination and connection with backelite sheet and connector, MCB, foundation bolts, Bottom dia-350mm up to 1200mm height from base plate.Top section dia 90mm & toleranoe as per IS code or approved by engineer in charge, Supply and fixing of decorative 60 Watt LED Post top indirect/suspended light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect with 5years warantee.( With wiring Complete) Technical specification, make & profile as approved by engineer in charge.CAT AA.

Strengthening of ST/Octogonal pole/High Mast/Panel, foundation by providing new concreting including broken of weak foundation, excavation below upto Ground level, Surface finishing and painting with white cement and dark yellow colour cost of all material men and T&P complete in all respect.

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect

Supply and fixing of LED Street light 120 watt Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect Cat AAA (Make: Philips. Crompton, Bajaj)

Supply and fixing 40A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering insteument & instrument box with CTs etc. complete in all respect. (with labour)

Supply and wiring of submain with 2 number 2.5 sqmm FRLSH PVC insulated single core multistranded copper conductor cable in existing conduit complete in all respects complete.

Supply and fixing of 12.5 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3mm. Top dia minimum 150 mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia, double drum winch. including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. (Make Bajaj/Philips/Wipro/BP) with UPSIDA Acrylic Glow shine prescribed Logo

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150Watt. Confirming to IP 66 protection complete in all respect with 5 years warrantee Cat.-AAA (Philips/Wipro/Crompton/Bajaj) with labour.

Supply and fixing 25A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering insteument & instrument box with CTs etc. complete in all respect. (with labour)

Supplying and laying of 10 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V on serface the cable run shall be fixed on ms clamps etc of suitable size or as directed by the e.i. grade at a complete in all respects cable laying in existing pipe. (Havells/Polycab/Grandley)