SPECIAL REPAIRS TO CERTAIN PORTION OF OFFICERS MESS AT VSN NAGPUR

Amount

Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour rendering 5 mm thick on ceiling in CM (1:3) finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash all as specified and directed.

Material and labour for rendering 15mm thick on other than fair finish of bricks/ concrete/ stone surface of wall in CM (1:4) mixed with WPC and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls, and applying two coats of cement based paint over a coat of alkali registant primer complete all as specified and directed.

Material and labour for rendering 10mm thick in CM (1:6) in brick surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour for preparation of old plastered ceiling surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion complete all as specified and directed.

Material and labour for preparation of old plastered wall surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion complete all as specified and directed.

Material and labour for preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

Material and labour for preparation of old plastered external wall surfaces with complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed.

Material and labour for 3mm thick wall care putty on intrnal surfaces of wall complete all as specified and directed.

Material and labour for preperation of old painted surfaces, one coat of synthetic enamel paint on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

Material and labour for preparation of old plastered ceiling surfaces and applying one coats of white wash complete all as specified and directed.

Material and labour for 3mm thick wall care putty on ceiling complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

Material and labour for providing 75mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as plinth protection / path finished the surface even & smooth with out using extra cement complete all as specified and directed.

Dismantling water tanks 500 ltrs capacity but not exc 1000 ltrs capacity complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections complete all as specified and directed.

All as per item No 20 above but 20 mm bore

Supply and fixing GI Tubes, ‘medium grade’, galvanised, concealed with all fitting 15 mm bore including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed.

All as per item No 20 above but 20 mm bore

Supply and fixing in repairs PVC (SWR) pipes, 110 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and directed.

Supply and fixing in repair 110 mm PVC (SWR) bends of any radius complete all as specified and directed.

supply only 10 litres capacity PVC valveless, syphonic action type, slim body fancy flushing cistern, low level, white, with inlet valve, float valve and handle all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor all as specified and directed.

Supply and fixing in repair vitreous china wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,fancy type brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm 450 long from stop valve etc complete all as specified and directed.

Supply and fixing PVC, 32 mm dia,polythelene of low density of pressure raing 4 kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and directed.

Supply and fixing in repair brass chromium plated hand shower (health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer ) complete all as in specified makes all as specified and directed.

Supply and fix 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair complete all as in specified makes all as specified and directed.

Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms) all as specified and directed.

Supply and fixing in repair fancy stop valve 15mm bore fancy type chromium all as specified and directed.

Supply and fixing in repair pillar tap brass CP fancy type, foam flow, 15mm with capston heads , screwed down high pressure for wash hand basin all as specified and directed.

Supply and fixing glazed corner shelf with brass CP railling of all as specified and directed.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Material and labour for repairs to ends of chajja by removing old loose concrete material, cleaning the reinforcement and finishing the surface by applying the epoxy based resin of manufacturer pedicrete and chowksey/ STP/ SIKA and making good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with appoxy coating and applying two coats of weather proof emulsion paint over a coat of primer up to 600 mm depth and 100 mm thickness including necessary scafolding and formwork as required at site etc. complete all as specified and directed.

Material and labour for cutting openings, through brick walls for door, window and other openings or enlarging existing openings built in cement mortar. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc. to store and rubbish not exc. 50m complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exe 1.5 sqm but n.exc 4sq.m all as specified and directed.

Supply and fixing pressed steel frames for door of size 165x60mm with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc all as specified and directed.

Supply and fixing flush shutters,30 mm thick solid core construction, with blockboard core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ ppropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings all as specified and directed.

Material and labour for particle board, (18/19 mm thick) medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work /partition all as specified and directed.

Supply and fixing in repair Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

Supply and fixing in repair for aluminium alloy, anodised, sliding door bolt (250mm long) with hasp,nstaple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-uminium alloy and fixed complete all as specified and directed.

Supply and fixing in repair floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

Supply and fixing mild steel butt hinges medium weight size 100mm long all as specified and directed.

Supply and fixing aluminium handles cast type anodised size 150 mm long all as specified and directed.

Supply and fixing aluminium anodiesed barrel tower bolt of extruded section size 200 mm all as specified and directed.

Dismantling of floor, hearth or wall tiling, granite platform/kota stone flooring including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material and labour for virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles in vertical surface vertical surface 350x 250x 7mm / 450X 350X 7mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado complete all as specified and directed.

Material and labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors (joint free )etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes complete all as specified and directed.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Supply and fixing in repairs harrison curtain rails, 19/20mm dia, fancy type powder coated aluminium alloy with fixing brackets, stops, rollers etc including taking down old one all as specified and directed.

Material and labour preparation of brick wall surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying water proofing liquid Dr. Fixit Pidicrete URP or equivalent in SIKA/ STP in two coats on brick wall as per manufacture instruction mix with cement all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab, balconey with suitable arrangement complete all as specified and directed.

Material and labour for 12 mm thick toughned fixed glass, tempered and celled glass all necessary fittings and fixture and all connecting materials as per manufacturers instructions for fixing with SS railing complete all as specified and as directed, Note :- Design and pattern shall be provided over toughned glass as per aprroved design and glass and design shall be aprroved by GE before execution of work.

Material and labour for preparation of plastered surfaces or roof to surfaces/ APP membrane surfaces throgh cleaning and washing to remove foreighn materials and applying two coats of heat reflective paint all as per directed/instructed by Engr-in-charge or as per paint manual instructions. Note:- (1) The time gap between two coats will be min 4 hrs. (2) The solar reflective index (SRI) value of paint has tyo be in the range of 121 to 123. (3) Volatile organic compoundsfor this paint should be between 1.2 - 1.34 gm per liter all as specified and directed.

Material and labour for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) Gypboard ceiling (conforming to IS-2095-1982) manufactured by M/s India Gypsum false ceiling using GI perimeter channel of size 20mm (one flange) x 27mm (web) x 30mm (other flange) x 0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channels (of size 5mmx45mmx15mmx0.9mm thick) @ 1220mm centre to centre with ceiling angle (of size 25mmx10mmx0.55mm thick) fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55mm thick having Knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm) using connecting clip and in direction perpendicular to intermediate channel @ 300 mm centre to centre and Gypboard fixed to ceiling section using 25mm drywall screws @ 230mm centre to centre complete all as per manufacturer’s instructions and as directed.Including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false ceiling complete all as specified and directed.

Material and labour for texture painting of any design any colour on existing or new wall/plastered surfaces including preparation of wall surfaces, over a coat of primer and wall care putty as required. Note:- design and colour of texture painting will be as as approved by GE. Complete all as specified and directed.

Material and labour for removal of vegitation, plants etc from the wall surfaces and making good and filling the same with cement mortar 1:2 including putty as required and necessary arrengment complete all as specified and directed.

M/s Ashwin Bhange

dhanshree enterprises

M/s Rahul Traders

S D WAGHAMSHI

Asha Enterprises

Raut Construction

M/S Darshan Singh Plaha