Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 hence accepted | |
| 2 | L2₹8.6 L+₹99,841.25 (13.1%)Rejected-Finance 00 JAI BHAWANI COMPLEX MAIN ROAD SADAR WARD JAGDALPUR BASTAR CHHATTISGARH 494001 UDYAM CG 01 0003803 | BASTAR | CHHATTISGARH | 494001 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹9.4 L+₹1.8 L (23.6%)Rejected-Finance 1814 NARSING NAGAR RANJHI JABALPUR MP 482005 | JABALPUR | JABALPUR | MADHYA PRADESH | 482005 | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹9.4 L+₹1.8 L (23.7%)Rejected-Finance 00 ITBAHRA GAUR KANIKAPUR ROAD KANIKAPUR BASTI UTTAR PRADESH 272163 | BASTI | UTTAR PRADESH | 272163 | L4 | Rejected-Finance Being other than L1 |
Tender Value
₹8.7 L
EMD Value
₹17,500
Closing Date
8 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Naya Raipur
AGE (I) Naya Raipur PIN 492101 (CG)
PROVN OF ATT TOILET IN BLDG NO T 29 AND OTHER MINOR WORKS AT BLDG NOS P 28 P 45 AND P 51 AT NAYA RAIPUR MIL STN UNDER AGE I NAYA RAIPUR
2022_MES_536472_2
8400/339/E8
Open Tender
Civil Works
Item Rate
120 days
AGE (I) Naya Raipur
As per tender documents
8 documents required · 8 mandatory
₹500
AGE (I) Naya Raipur
₹17,500
18 Oct 2022
18 Aug 2022
10 Sept 2022
18 Aug 2022
8 Sept 2022
25 Aug 2022
Amount
Surface dressing n exc 15 cm deep and getting out in soft /loose soil complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n. exc 15 cm thick (below or above ground level) and removing the rubbish to a distance n.exc 100 mtr complete all as specified and directed.
Dismantling of old decayed / damaged brick work in cement or cement lime mortar and in any condition including removal of same complete all as specified and directed.
Taking down chowkats or frames not exc. 1.5 sqm each without taking off shutters from the frame complete all as specified and directed.
Excavation in trenches not exc 1.5 m wide and n.exc 1.5m in depth for foundations etc in soft/loose soil complete all as specified and directed.
All as per item No 5 above but depth exc 1.5 but nexc 3.0 Mtr complete all as specified and directed
Returning , filling in spreading and levelling and well ramming in layers not exc 25cm including watering for filling under floor complete all as specified and directed.
Removing of excavated material (soils, etc) to distance n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings laid in layers n exc 15 Cm thick spread levelled and rammed including watering etc complete all as specified and directed.
M&L for sand filling under floors or in foundations spread levelled and rammed including watering etc complete all as specified and directed.
M&L broken brick hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n. Exc 15 cm thick watered and rammed to true surface complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete (Nominal mix) Type A1 1:11/2:3 (using 20mm graded stone aggregate)as in foundation including rafts,f ooting, foundation beams, plinth beams, bases for columns, etc and mass concrete complete all as specified and directed.
M&L reinforced cement concrete (Nominal mix) Type A1 1:11/2:3 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L reinforced cement concrete (Nominal mix)A1 1:11/2:3 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L reinforced cement concrete (Nominal mix) Type A1 1:11/2:3 (using 20mm graded stone aggregate) as in slabs supported on walls etc. complete all as specified and directed.
Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. .
Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spiarally for hooping for columns, plinth beam etc, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia. complete all as specified and directed.
ditto all as per item No 22 above but 5 mm dia and over upto including 10mm dia as in stirrups, spacers and binder complete all as specified and directed.
M & L brick work with sub class B Modular bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L damp proof coarses in cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) 40mm thick including necessary form work complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub floor to receive any type of floor finish, tiles etc complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub floor to receive any type of floor finish, tiles etc complete all as specified and directed.
M&L 75 mm thick PCC as in plinth protection and path type C-2 1:3:6 (20 mm graded agg) finishing cement surfaces even and smooth with out using extra cement complete all as spd & directed including making of joints at every 2.5 mtr and at corner fillled with mastic filling with bitumens 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.
M&L rendering 10mm thick plaster in CM 1:6 on brick or concrete surfaces finishing the surface even and fair complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick or concrete surface in Cm (1:4) and providing in two layers of 10mm and 5mm thick each. Second coat of 5mm thick with WPC @ 3% of cement and finishing even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately).
M&L rendering 5 mm thick in CM 1:3 as in ceiling finished surface even and smooth without using extra cement complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm in floor etc,over and incl 15 mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match. incl rendering 10mm thick in CM (1:4) and finished rough complete all as specified and directed.
M&L for two coats of oil bound emulsion distemper incl preparation of new plastered surface of wall over and incl a coat of primer complete all as specified and directed.
M&L for three coats of white washing on ceiling including preparation of surfaces complete all as specified and directed.
M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over and incl a coat of alkali resistant primer complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
S&F Vitreous China cascade type wash down water closet pan(pedestal pattern), white with soft seat cover,fixing accessories incl cistern fitting , flushing cistern and flush pipe "P" or "S" trap etc. complete all as specified and directed.
S&F 10 Ltr PVC valveless, syphonic action type flushing cystern low level with inlet, ball valve, float and handle including brackets and PVC out let sutaible for IWC complete all as specified and directed.
S&F for Vitreous china wash basin, white size 600x400x185 mm counter type as per catalouge,SLS-WHT-6601 Make- Jaquar or equivalent series in hindware or parryware complete fixed in counter opening of granite platform and supported over bracket etc. including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including bottle trap fitted complete all as specified and directed.
S&F 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.
S&F 15mm bore Brass CP wall mixer for mixing hot & cold heavy duty fancy type suitable for 15 mm bore concealed with cup and telephonic shower water screwed down , for iron pipe or for brass ferrule complete all as specified and directed.
S&F 15 mm fancy/concealed type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.
S&F for 15mm bore, bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F 15 mm stop valve cast copper alloy chromium plated fancy type screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.
M&L brass chromium plated tubular towel rail 20mm dia D type 600 mm long between flanges fixed complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs complete all as specified and directed. .
S & F for Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
S&F shower rose 125 mm brass chromium plated with swivel joints complete all as specified and directed.
S&F PVC colour health faucet complete set cardiff with hose & hook complete all as specified and directed.
S & F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm complete all as specified and directed.
M&L for Cutting chases ,pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing ,steps cills, sunshades, shelves ,lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good ,cutting not exc. 10 cms girth complete in brick walls complete all as specified and directed.
S&F GI tubing medium grade with all fitting and fixed to wall ,ceiling or laid in floor etc complete of 15 mm bore pipe complete all as specified and directed.
S&F GI tubing medium grade with all fitting and fixed to wall ,ceiling or laid in floor etc complete of 20 mm bore pipe complete all as specified and directed.
S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube complete all as specified and directed.
M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
S&F PVC(SWR) 75mm bore pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.
S&F PVC(SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.
S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed.
S&F PVC (SWR) bend any radius 75mm bore complete all as specified and directed.
Supply and laying double wall corrugated DWC pipe HDPE pipe of outer dia 150mm of approved make ISI marked polythene with smooth internal wall & profiles external surfaces for non pressure for sewage complete all as specified and directed.
Supply and fixed PVC (SWR) vent cowl, 100mm dia complete all as specified and directed.
M&L concrete bed to drain pipe including packing under and haunching against the side and pipe of 150mm bore in cement concrete 1:3:6 type C2 after they laid and tested complete all as specified and directed.
S&F Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.
S&F 75mm PVC (SWR) floor trap(S/P), plain with grating including jointing with solvent cement complete all as specified and directed.
S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.
S&F 110mm PVC soil waste and vent pipes in any length with or with out ears with cement joints , fixed to wall complete all as specified and directed.
S&F 110 mm bore bends PVC (any radius) with oval access doors ISI marked complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Sqare tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheetcomplete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles beading, and joined to gether with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed.
S&F Anodised aluminium frame for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as specified and directed. (Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately.
S&F Anodised aluminium door shutters,aluminium section, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1No), hinge type B-21 100mm long (2 No) suitable handle (1No) complete all as specified and directed.
S & F Anodised aliminium window and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing anodised aliminium snap beading screws anodised aluminiumfitting such as peg stays 150mm long(1no)hinges type B-21 100mm long (2no) hinges type B-21 100mm long (2no) suitable handles(1no) complete all as specified and directed.
S&F 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and directed.
S&F aluminum handles cast type anodize 150 mm long complete all as specified and directed.
S&F extruded aluminium alloy butt hinges 100mm size type B-21 complete all as specified and directed.
S & F curtain rods of anodised aluminium alloy with fixing brackets , stops, roller etc complete all as specified and directed.
S&F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in repairscomplete all as specified and directed.
S&F figured glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane thickness of glass 3mm thick complete all as specified and directed.
S&F MS sliding door bolts 300mm long plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bold plate and two on staple plate and fixed complete all as specified and directed.
M&L rendering 10 mm thick in CM 1:3 , mixed with water proofing compound, on concrete surfaces of roof , surface finished even and smooth complete all as specified and directed. . (supply only of water proofing compound shall be measured and paid seperately)
M&L for cleaning the top surface of concrete and providing APP based polymeric membrane minimum weighing 3kg/sqm of approved make for water proofing treatment test to be carried out from national test house/Govt lab , including priming the surface by applying bituminous primer @ 0.3 Kg/sqm and applying the surface by blown grade bitumen 85/25 @ 1.20 Kg/Sqm & applying water proofing memberane(with minimum 10 cm. overlaps) and applying the surface by blown grade bitumen 85/25 @ 1.20 Kg/Sqm and applying two coats of aluminium paint complete all as specified and directed.
S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 complete all as specified and directed.
M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description over 10cm width or girth complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping complete all as specified and directed.
S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.
S&F Sheet glass 5.5mm thick, ordinary quality and glazing fixed with aluminium section in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.
S & F Door closer hydraulically regulated of Aluminium (Extruded section) body designation No.2, universe type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.
M&L for angle iron / flat iron for fixing chain link or hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and clountersunk for balusters running bars, for doors, balusters, nosing to steps including embneding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc, and similar work conforming to Fe-290 or Fe-165 complete all as specified and directed.
M&L for round bars for reinforcement 10 mm dia and over cut to lenth, bent to shape required including bending, cranking, spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip quality complete all as specified and directed.
Supply only Chain link MS Galavanised fencing any size or type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
S&F mild screw bolts 11 to 15 mm diameter of neck shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to fitted with washers and one hexagonal or square n.exc 5cm long complete all as specified and directed.
M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 sqmm (nominal area), single core, flame retardant low smoke(FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including PVC casing & capping and its fittings ISI marked, with mild steel sunken boxes suitable for modular/normal switch/sockets etc with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer internally, incl covered with suitable module cover plate with frame including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 sqmm (nominal are) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for One light/Fan/Bell point controlled by one switch Make of Cable :- Havells / Polycab / Anchor Make of PVC conduit & conduit accessories - PLAZA / FINOLEX/ KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling
Ditto all as per item No 97 above but for One light point controlled by two 2 way switch
Ditto all as per item No 97 above but for One socket out let 5 pin 5 Amp on independent board
Ditto all as per item No 97 above but for One socket out let 5 pin 5 Amp on same board
Ditto all as per item No 97 above but using 4.0 Sqmm cable for one 15 A socket outlet point with 2.5 Sq mm PVC insulated, unsheathed copper conductor cable as earth continuity conductor.
S & F modular switch 1 way 6A 1 module complete all as specified and directed.
S & F modular switch 2 way 6A 1 module complete all as specified and directed.
S & F modular socket 6A 2/3 Pin combined 2 module complete all as specified and directed.
S & F modular socket 6A/16A 2/3 Pin combined 2 module complete all as specified and directed.
S & F modular switch 1 way 16A 1 module complete all as specified and directed.
S & F modular Fan step regulator, 120W - 2 module complete all as specified and directed.
S & F White cover plate with frame, 3 module complete all as specified and directed.
S & F White cover plate with frame, 4 module complete all as specified and directed.
S & F White cover plate with frame, 8 module complete all as specified and directed.
S & F for ceiling rose 3 phase/PVC/polycarbonated isolated body complete all as specified and directed.
Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm incl all assesories and cuttting of hole for fixing arrangement complete all as specified and directed.
Supply and fix electric water heater (geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, 2 Nos connection pipe etc complete all as specified and directed.
S & F for MCB DB's 8 Way SPN for mounting MCBs/RCBO's ELCB's etc. as per IS specification of factory made fabricated out of CRCA sheet 1.2 mm thick powder coated fitted with DIN Channel neutral link and 200 Amps rated bus bar.The DB's shall double door type . Inner door fixed on spring loaded hinges with locking arrangement & outer door openable hinged with locking arrangement having IP-43 protection complete all as specified and directed.
S & F for MCB/Isolator DP 40 Amps 240 Volts C Curve 10 KA complete all as specified and directed.
S & F for MCB/Isolator SP 6-32 Amps 240 Volts C Curve 10 KA complete all as specified and directed.
M&L Sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated cable FRLS with Multi Strand copper conductor of size 6 Sq. mm and one run of PVC insulated 6 sqmm stranded copper conductor earth wire drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors complete all as specified and directed. Note:- Two wires of 6 sqmm and one earth wire of 6 sqmm & PVC conduit shall be measured as one unit.
Cutting existing steel tubing for alterations or additions (Each cut measured) done in position without taking down of bode dia 25mm complete all as specified and directed.
S&F GI tubing medium grade with all fitting and fixed to wall ,ceiling or laid in floor etc complete of 25 mm bore pipe complete all as specified and directed.
S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. Note : water tank shall be ISI Marked having minimum three layers
S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube. complete all as specified and directed.
M & L for disconnecting of existing LT line to the electric panel, Change over switch, taking out from the existing location and re-install the electric panel and change over switch at a place shown by Engr-in-Charge (approx 2 mtr distance of either side) including all necessary wires, cables and connecting all the existing cables and make good the disturbed area complete all as specified and directed. Note - (i) Rate deemed to included the T&P used for this purpose bring by the contractor and If again any fault occur of same nature of repair during the contact period shall be rectified by the contractor at free of cost.(ii) All cables, joints, wires/casing caping and earth work required for the job to be included in the quoted rates (iii) Dismantling of PCC foundation and re-construction for mounting of panel shall also included in the quoted rates
Material and labour for providing earthing complete with galvanised steel earth pleate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5mtr below normal ground level) connected to galvanised iron earth strip 32x6mm as earthing lead by means of bolts, nuts, check nuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No 3 connected to earth test point all as specified and indicated including testing on complete all as specified and directed. Note:- Earth continuity conductor and GI protection pipe beyond 7.5m shall be measured and paid under the respective items.
Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 3,900.00
sanjay enterprises
TRISHLA CONSTRUCTIONS
M K ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .