Development of Shrine Premises and Bada Talab at Charisharief B.W.O Upgradation of Bada Talab Boundary walling ELECTRIC WORK

Supply, installation, testing & commissioning (SITC) of 45W LED Postop made up of aluminium pressure die-cast aluminum with polycarbonate cover in addition to a specific weathering resistance treatment, Bigger Dia of 338 mm helps for uniform light distribution & Polycarbonate cover for glare-free light distribution, PDC spigot helps in sturdiness of product, Smooth finish Top cover, Robust Mounting base & Direct the light where it is needed to avoid sky pollution. High Efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen Efficacy of LED >100Lm/W and CRI >70. Powered by Built In electronic. LED driver with THD<10%, 4kV inbuilt surge protection, high cut off at 325V, LV cut-off & HV Protection@440V for 8 hrs. System Lumen >4500 Lm, IP 65 or above, IK 05, PF>0.95, Operating voltage range: 140 V - 270V, Average life L70B50: 50,000 hours. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approva Make . Signify Cat. Ref. No. BGP200 LED45 CW or equivalent in Endo / LT /Regent suitable for outdoor mounting on existing stone pillars (~1.0 m height); complete with all accessories, connection wiring, junction box, earthing, hardware, and as directed by Engineer-in-Charge. The Agency / firm must submit the Techanical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 3-years replacement OEM warrenty for the entire lighting fixtures from the the date of sucessful / handing over of site to intending department , covering any damage /mulfunctioning /burnt out (replacement warrenty certificate from OEM for 3 years covering all damages be submitted before any bill for payments are processed) To be fixed on Devri Stone Pillars Near Bada talab = 35 No's No's Near front side of Shine = 14 No's Rear Side of Shine = 7 No's Total = 56 No's

Supply, installation, testing & commissioning (SITC) of Decorative LED Gate Light Luminaire, suitable for outdoor mounting on entrance gates / boundary pillars, made of UV-stabilized polycarbonate housing & diffuser with anti-dust coating to prevent dirt accumulation and ensure long-term clarity. The fixture shall have high-impact resistance, weather-proof design, and IP66 protection. Technical Specifications: Type: Decorative LED Gate Light (post-top type) Power Rating: 45-50 W LED Lamp (as per design requirement ,including its cost ) Ingress Protection: IP66 (dust & water jet proof) Impact Resistance: IK08 (minimum) Housing Material: Polycarbonate, UV-stabilized, anti-dust coated Diffuser: Opal / Clear polycarbonate, anti-dust treated for easy cleaning and uniform light distribution Finish: Black / White / Decorative finish (as approved by Engineer-in-Charge) LED Light Source: High-power LEDs with system efficacy ≥ 110 lm/W CCT (Colour Temperature): 3000K / 4000K (warm or neutral white) CRI: ≥ 70 Power Factor: ≥ 0.95 THD: ≤ 10% Surge Protection: In-built SPD ≥ 4 kV, external SPD up to 10 kV Operating Voltage: 140–270 V AC, 50 Hz L70 Life: ≥ 50,000 burning hours at 25°C ambient temperature Mounting: Suitable for fixing on MS/GI pipe bracket / stone or concrete pillar top (OD 60 mm approx.) Warranty: Minimum 3 years for housing and 5 years for electronic driver + LED module Recommended Makes: Philips, Wipro, Crompton, Bajaj, Havells, or equivalent as approved by department not below the rank of SDO

Supply, installation, testing & commissioning (SITC) of Decorative LED Gate Light Luminaire, suitable for outdoor mounting on entrance gates / boundary pillars, made of UV-stabilized polycarbonate housing & diffuser with anti-dust coating to prevent dirt accumulation and ensure long-term clarity. The fixture shall have high-impact resistance, weather-proof design, and IP66 protection. Technical Specifications: Type: Decorative LED Gate Light (post-top type) Power Rating: 20-30 W (as per design requirement ,including its cost ) Ingress Protection: IP66 (dust & water jet proof) Impact Resistance: IK08 (minimum) Housing Material: Polycarbonate, UV-stabilized, anti-dust coated Diffuser: Opal / Clear polycarbonate, anti-dust treated for easy cleaning and uniform light distribution Finish: Black / White / Decorative finish (as approved by Engineer-in-Charge) LED Light Source: High-power LEDs with system efficacy ≥ 110 lm/W CCT (Colour Temperature): 3000K / 4000K (warm or neutral white) CRI: ≥ 70 Power Factor: ≥ 0.95 THD: ≤ 10% Surge Protection: In-built SPD ≥ 4 kV, external SPD up to 10 kV Operating Voltage: 140–270 V AC, 50 Hz L70 Life: ≥ 50,000 burning hours at 25°C ambient temperature Mounting: Suitable for fixing on MS/GI pipe bracket / stone or concrete pillar top (OD 60 mm approx.) Warranty: Minimum 3 years for housing and 5 years for electronic driver + LED module Recommended Makes: Philips, Wipro, Crompton, Bajaj, Havells, or equivalent as approved by SDO . The Agency / firm must submit the Techanical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 3-years replacement warrenty for the entire lighting fixtures from the the date of sucessful / handing over of site to intending department , covering any damage /mulfunctioning /burnt out

Supply, Laying, Testing , termination and Commissioning of 3 core -2.5 Sq.mm copper conductor pvc insulated armoured cable (3C-2.5 Sq.mm) of havells /Grandlays / Polycab make to be laid from feeder pillars to luminaries ,including cable glads ,lugs ,saddles , fixing of copper thimbles on input and output side ,clamps complete job ,

Supply, Laying, Testing and Commissioning of XLPE insulated PVC inner sheathed steel armoured Al Cable of Havells /grandlays /Polycab make incl making of necessary connections with proper size of Al Thimbles dully crimped with crimping tool

10 sq mm 2- Core

Supplying and fixing of following sizes of 50 mm steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Providing and laying of Cement Concrete of Ratio 1:2:4 with 20 mm nominal size of aggerate including carriage from source to site of work.

Supply/ installation/testing and commissioning of Outdoor type Wall / floor mounted compartmentalized Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, duly painted with powder coating ( not less than 80 microns ) incl earth terminal with all necessary accessories as required for panel (IP 54) with internal wiring of panel , provided and fitted with 100- 200 P&N Colour Coded Bus Bar (As per instructions of EIC) and should be provided with indicators ,Voltmeter ,ammeter ,CT Coils etc .The Panel should have spacing for accomadating of 100-125 Amps TPN MCCB /MCB (Excluding cost of MCCB/MCB) but including cost of Bus Bar ,indication and metering devices. The Panel Should also have Spacing of outgoing MCB's equivalent to 12 Way DB Box (To be fabricated as per instructions of EIC Before submitting of SDL) The above mentioned quantities are for one panel and in total three (3 No) panels indual panels are to be fabricated having 2 No's of 3 ft x 2 ft x 1 ft =18 sft