Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹23.1 L+₹2.2 L (10.6%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
₹23.8 L
EMD Value
₹47,500
Closing Date
6 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PATIALA
HQ COMMANDER WORKS ENGINEER BLDG No 26 NEW LALBAGH PATIALA 147001 Contact 01712200082
CONSTRUCTION OF SWT UNDER AGE (I) DAPPAR
2024_MES_640806_1
CWE/PAT/T-65/2023-24
Open Tender
Construction Works
Item Rate
180 days
DAPPAR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE(I) DAPPAR
₹47,500
27 Mar 2024
5 Feb 2024
8 Mar 2024
5 Feb 2024
6 Mar 2024
21 Feb 2024
5 Feb 2024 - 20 Feb 2024
Amount
Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified
Excavating over areas not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. not exc 10 sq. m on plan and getting out in soft/loose soil, complete all as specified
Excavating over areas exceeding 1.5m wide and not exceeding 3m in depth; for foundation etc. not exc 10 sq. m on plan and getting out in soft/loose soil, complete all as specified
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for flaying CI/ DI pipes in trenches. and getting out in soft/loose soil, complete all as specified
Material & Labour for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil, complete all as specified
Removing Excavated soils not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point.
Material & Labour for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material & Labour for cement plastering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.
Supply only integral liquid water proofing compound complete all as specified and directed.
Material & Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge.
Material & Labour for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates for framed works as in gate of angle or other sections with guesset plate Fe-410-W(Gde-E-250) quality -B complete all as specified and as directed by Engr-in-charge.
Material & Labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing l Fe-410-W(Gde-E-250) quality -B complete complete all as specified and as directed by Engr-in-charge.
Material & Labour for Expanded metal exc 4 kg , cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.
Material & Labour for Preparation of new steel and iron surfaces of any description exc 10 cm in width or girth, priming with a coat of red oxide primer and applying two coats of synthetic enamel paint complete all as specified.
Material & Labour for Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified & directed.
Material & Labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment M-35 grade as specified & as directed by Engr-in-Charge.
Material & Labour for Machine pressed precast rubber moulded cement concrete block in 1:2:4 type B-1 (using 20 mm graded stone aggregate ) for kerb stone , weathering , throating etc and setting in cement mortar 1:4 complete with joints to match complete all as specified and direted by engr-in-charge
Material & Labour for preparation of new concrete surfaces of any description over 10cm girth or width, not otherwise described and applied two coats of emulsion paint white/ yellow /black over a coat of primer complete all as specified and as directed.
Material & Labour for Reinforced cement concrete M-30 (20mm graded aggregates) design mix in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses concrete complete all as specified and as directed by Engr-in-charge.
Material & Labour for Reinforced cement concrete M-30 (20mm graded aggregates) design mix in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engr-in-charge.
Material & Labour for Reinforced cement concrete M-30 (20mm graded aggregates) desgn mix in Columns, pillars, piers,posts and struts complete all as specified and as directed by Engr-in-charge
Material & Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engr-in-charge.
Material & Labour for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter complete all as specified and as directed by Engr-in-charge
Material & Labour for Form work to sides of pillers, posts, piers, columns square, rectangular or polygonal for rough finished surface of concrete complete all as specified and as directed by Engr-in-charge.
Material & Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
Material & Labour Mild steel TMT bar 6 to 8 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking bending spirally hooping for column, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to, as in stirrups, spaces and binders complete all as specified
Material & Labour 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protection. Complete all as specified and directed
Supply & Fixin centrifugally cast (spun) ductile iron pressure pipes with socket & spigot ends having ISI stamping marking with IS 8329/2000 classification K7, In standard length of 5.5-6 mtr suitable for and including push on joint (gassket D jointing) with cement mortar lining in the pipes including all fitting for 100 mm dia complete all as specified and directed .
Supply & Fixing DI fittings for flanged & spigot socketed pipe e.g bends (any type, radius and angle ) tapers any type (straight, bend, increasing, decreasing or double socket etc) tee pieces, collars, caps and plugs conforming to IS of size upto 200/150/100 mm bore complete all as specified and directed.
Supply & Fixing cast iron sluice valve 100mm dia, flanged ends, stem (spindle) of SS (forged) and check nut of gun Metal, PN rating 1.6 working parts conforming to IS : 14846, and flanged ends having drilling as per IS:1538 complete all as specified and directed by Engr-in-Charge.
Cutting CI pipes and reducing to required length in position for inserting new tees of size 200mmx200mmx100mm with jointing material in existing 200mm dia DI pipe line including earth work required to complete the job. Cost of labour and material should be included in the rate quoted by the contractor nothing extra will be paid on this account all as specified and directed by Engr-in-charge . (Tee, collors, bends etc for 100/200mm dia pipes will be measured and paid seperately under respactive item of BoQ.
Material and labour constuction of brick masonary valve pit of size 900mmx900mmx900mm (internal size) thickness of wall shall be 23cm in brick work in cm 1:6 internally plastered in cm (1:6) and externally plastered in cm (1:4) over 15 cm thick PCC 1:4:8 type D-2 having 15m offset around , including 4 cm thick coping in PCC 1:2:4 type B-1 as the top of the brick wall and 3mm thick mild steel sheet cover and angle iron frame of Siz 40mm x40mmx6mm including provn of suitable hold fasts to hold the frame, loocking arrangement and lifiting handle, duly pained with two coats of synthetic enamel paint, over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
shree balaji builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .