Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC | L1 | Accepted-AOC Being the lowest and reasonable bidder | |
| 2 | L2₹8.3 L+₹79,484.90 (10.6%)Rejected-AOC | L2 | Rejected-AOC Being the other than lowest bidder | |
| 3 | L3₹8.9 L+₹1.4 L (18.8%)Rejected-AOC | L3 | Rejected-AOC Being the other than lowest bidder | |
| 4 | L4₹10.2 L+₹2.6 L (34.9%)Rejected-AOC 0 PUKHTA BAZAR JAHANGIRABAD RURAL BULANDSHAHR UTTAR PRADESH 203394 | BULANDSHAHR | UTTAR PRADESH | 203394 | L4 | Rejected-AOC Being the other than lowest bidder | |
| 5 | Rejected-Technical 00 KAMALWAGANJA ROAD NEAR HANUMAN MANDIR HARINAGAR SHIV PURAM PHASE 1 HALDWANI NAINITAL UTTARAKHAND 263139 | NAINITAL | UTTARAKHAND | 263139 | - | Rejected-Technical Due to adverse remarks in WLR circulated by HQ CEUZ for QE Jun 2023 |
Tender Value
₹10.3 L
EMD Value
₹20,500
Closing Date
9 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Nagrota
HQ CWE Nagrota Co 56 APO
ADDITION/ALTERATION IN DINING HALL OF BLDG NO. PS-18 AT TRIKUTA OFFICERS INSTITUTE AT NAGROTA MIL STN UNDER GE NAGROTA
2023_MES_622869_1
CWE/NGT-27/2023-24
Open Tender
Civil Works
Item Rate
122 days
Nagrota
As per NIT and tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Nagrota
₹20,500
Yes
6 Jan 2024
12 Oct 2023
16 Nov 2023
12 Oct 2023
9 Nov 2023
26 Oct 2023
12 Oct 2023 - 19 Oct 2023
Amount
Demolition of cement concrete in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.
Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing),removing serviceable tiles to store and rubbish off the premises.
M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even and fair surface, complete all as specified and directed.
M & L for Vitrified Ceramic tiles 10 mm thick Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified.
M&L for cement concrete 1:3:6 type C2, 75mm thick (using 20 mm graded stone agg) as in plinth protection, complete all as specified and directed.
M&L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work, complete all as specified and directed.
M&L for providing and fixing stainless steel (grade 304) railing made of hollow tubes,channels, plates etc including welding, grinding buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top floor or the side of waist slab with suitable arrangement (Note: Grade and make to be embossed on the railing).
M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh, complete all as specified and directed. (Note:- Fillets, metal frame work and G.I. wire mesh to be measured and paid separately)
Supply and fix lnsulated PVC Wall Lining consisting of PVC insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications complete all as specified and directed.
Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed.
Taking down chowkat & shutter exceeding 2.00 Sqm and removing from site complete all as specified and directed.
S&F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as specified and directed by Engineer-in-charge. (Note:- Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately.
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Make- Jindal Section or as per amkes given in particular specifications.
S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed by Engr-in-charge.
S&F Sheet glass 4mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete.
S & F Door closer hydraulically regulated of Aluminium (Extruded section) body designation No.3, universe type, suitable for door shutters of 850 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F 20 mm dia decorative type curtain rod with rings and brackets complete all as specified and directed
Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.
S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia.
M & L for PCC 1:2:4 type B-1 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills and door /window lintel etc.
M & L for Form work to chajjas troughs and similar items including edges.
M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius built in CM 1:6 using all as specified using old size bricks
M&L 450x 300mm thick coloured glazed ceramic tiles as on walls/ vertical surfaces over 10mm cement rendering in cement mortar 1:4, complete all as specified and directed.
M & L for Rendering 10mm thick in cement plaster 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
M & L for Rendering 15mm thick in two layer (10mm+5mm) in cement mortar 1:4 on fair faces of brick work / concrete surfaces finished even and smooth with out using extra cement using WPC complete all as specified and as directed by the Engineer-in-Charge Notes:- (i) Water proofing compound to be used only on top layer of plaster (i.e. 5mm thick) (ii) Qty of WPC to be used @200ml per cement bag or as per manufacturer's instructions (iii) WPC shall be measured and paid separately
M&L for 5mm thick rendering in cement and sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth wihtout using extra cement, complete all as specified and directed.
Supply only integral water proofing compound.
M&L for preparing newly plastered surfaces of walls and applying three layer of Oil Emulsion Texture Paint over a coat of wall putty 2 to 3mm thick on plastered surfaces preparatory to distempering on wall surface .
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plastered surfaces preparatory to distempering on wall surface .
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer.
M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash.
M&L for complete removal of existing treatment and applying two coats of cement based paint on old wall surface .
M & L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) 75mm thick, , complete all as specified and directed.
M & L Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified
M&L machine pressed coloured pre cast concrete interlocking paver block ( with grey cement and no pigment) any shape and size conforming to IS -15658-2006 of 80 mm thickness, Electrovibro (M-40 grade) glazed finished block complete all as specified and directed by Engr-in-charge and GE
Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit complete all as specified and as directed by Engineer-in-Charge
M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick bakalite laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following :-
(a) One light point controlled by one switch 5 Amp.
(c) One socket out let 5Amp controlled by one switch on same board.
(d) One socket out let 5 Amp controlled by one switch on independent board.
All as per item No 38 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independent board.
All as per item No 38 here in before but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket 240V complete
S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.
S & F Modular socket 5 pin, 5/6 Amps suitable for 2 Module complete all as specified.
S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified
S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.
S & F Modular white cover plate including Modular base frame/boxes & powder coated Modular sheet metal concealed box for 12 module complete all as specified.
All as per Item No-45 above but 3 module complete all as specified.
All as per Item No-45 above but 2 module complete all as specified.
S & F Modular blanking plates 1 module complete all as specified.
S&F MCB SPN 32A, 10KA, 240 Volts "C' series complete.
Supply and fixing Harold Electricals Black surface handing COB Pendent light for dinning hall (12 Watt) adjustable to 4-39 inches in length made of molded steel, and are light weight and durable, with fast heat dissipation and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing Eliante Modern Green Black Metal Hanging Light pendent size 15 x 16 inch 0197HL-Without Bulb hanged through a chain and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing Sinmon Metallic Black Pendent Hanging Light, Hanging Lamp 10" including bulb with hanging rod of suitable size and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F of Noble Electricals Deep R2 Aluminium profile / Channel for LED Strip Light (White Standard Prong Base) Bulb Shape Size A15 suitable for wall recessed / semi recessed control type Push Button Theme & Style Modern colour metallic and connecting up with three core flexible copper conductor cable of suitable sixe ceiling rose complete.
Note:- Schedule of credit Rs. 2,695.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
M/S Shankardass Devidass
U K Engineering Works
SUNIL AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .