Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC | L1 | Accepted-AOC OK | |
| 2 | L2₹40.1 L+₹2.3 L (6.08%)Accepted-AOC | L2 | Accepted-AOC OK | |
| 3 | L3₹40.8 L+₹3.0 L (8.05%)Accepted-AOC HOUSE NO 49 SECTOR 28 FARIDABAD 121008 HR | FARIDABAD | FARIDABAD | HARYANA | 121008 | L3 | Accepted-AOC OK | |
| 4 | L4₹41.7 L+₹3.9 L (10.3%)Accepted-AOC BRAJANATHCHAK TOWNSHIP HALDIA HALDIA HALDIA | MEDINIPUR EAST | WEST BENGAL | 721605 | L4 | Accepted-AOC OK | |
| 5 | L5₹41.9 L+₹4.1 L (10.9%)Accepted-AOC R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L5 | Accepted-AOC OK |
Tender Value
₹37.5 L
EMD Value
₹75,000
Closing Date
21 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Partapur
GE Partapur
Special repair to Bldg No T-62 T-64 at Hunder and Provn of One Toilet Block of 05 x Toilet 02 x Urinal Point at 221 Transit Camp at Skampuk under GE Partapur
2023_MES_612792_1
GE/P-44/2023-24
Open Tender
Civil Works
Item Rate
275 days
GE Partapur
As per Tender Document and NIT
8 documents required · 8 mandatory
₹500
GE Partapur
₹75,000
Yes
3 Feb 2024
30 Aug 2023
23 Sept 2023
30 Aug 2023
21 Sept 2023
14 Sept 2023
31 Aug 2023 - 5 Sept 2023
Amount
Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets. all as specified an directed by engr in charge
M&L 9 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in wall with nails to timber frame work all as specified an directed by engr in charge
M&L 9 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in celing with nails to timber frame work all as specified and directed by engr in charge.
Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section all as specified an directed by engr in charge
M&L second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails/screw exc 13 and n.exc 25 Sqcm all as specified an directed by engr in charge
S& F for 18/19 mm teak wood lipping,6mm thick fixed with nails over veneered board joints complete all as specified and directed
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-charge.
S&F Galvanised MS sheeting of 0.50 mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall all as spd and as drected by Engr-in-Charge
S&F Plain, galvanised, mild steel sheeting of 0.50 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and as drected by Engr-in-Charge
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.complete all as specified and directed
All as per above item no 11 but old steel surfaces. complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed
M&L Non skid ceramic white tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4 compplete all as specified and directed by engr in charge
M&L Non skid ceramic white tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4 compplete all as specified and directed by engr in charge
M&L Glazed ceramic White tiles in vertical surface 300x 200x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick to receive the tile in cm 1:3. complete all as specified and directed by engr in chrge
M&L Virified Ceramic tiles of light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4 compplete all as specified and directed by engr in charge
Taking down chowkhat or door frames including shutters exc 1.5 sqm n exc 4 sqm each complete all as specified
Taking down chowkhat or frames including shutters n exc 1.5 sqm each complete all as specified
Taking down shutter exc 1 sqm but n Exc 2 sqm incl removal fom the site all as specified and directed
Taking down shutter exc 2 sqm incl removal fom the site all as specified and directed
M&L for Mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde- E- 250) quality- Acomplete all as specified anfd directed by engr n charge.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed.
S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints complete all as specified and directed.
S&F Fe-290 Gde-E-165 Bands, straps, supports or staysfor rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to compleet all as specified
S & F 30mm thick, 2nd class HW, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified
S&F 25mm thick Glazed and skeleton shutters 2nd class softwood open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.;for window , ventillator etc sizes of me-mbers of shutters as specified in SSR Part I, Section 8 clause 8.24(b), complete all as specified and as directed by Engr-in-charge.
Supply & fixing factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification. complete all as specified
Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as specified. complete all as specified
S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing of glass, particle board,aluminium frame etc omplete all as specified and directed
S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.. complete all as specified and directed
S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium sectionweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete.
S&F 100 mm long butt hinges medium weight cold rolled MS and fixed all as specified
S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed all as specified
S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp and stapple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. all as specified
S&F 150mm Extruded aluminium alloy handles, fabricated type. Anodised all as specified & directed by engr in chrge.
S&F Floor door stopper of 140mmFloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by engr in chrge
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified
S&F 75 mm long butt hinges medium weight cold rolled MS and fixed all as specified & Directed
S&F Aluminium, anodised, barrel tower bolts 75mm of extruded section and fixed all as specified & Directed
S&F 100mm Extruded aluminium alloy handles, fabricated type. Anodised all as specified & Directed
S&F inrepair Harrison rails/curtain rod , mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specied and directed
S&F in repair 32mm bore waste coupling of PTMT (Half or full threaded) (min weight 32mm-45gms/40mm-60gms) as specified and directed
S&F of 32 mm PVC waste pipe as specified and directed
S&F in repair cromium plated 15 mm bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed specified and directed
S&F cromium plated 15 mm bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed specified and directed
Supply & fix in repair CP stop valve 15mm bore dia of pipe concealed type long shank, complete all as specified and directed. Make: Zim/Parko
S&F angle cock 15mm bore, fancy type cast copper alloy chromium plated , screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed.
S&F inrepair 15mm pillar taps , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed
S&F 15mm pillar taps , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed
S&F in repair wash down water closet (Pedestal Pattern) (excluding flushing cistern and flush pipe) white including connection to drain and to flushing pipe, antisyphonage pipe etc, flush pipes of size 630 x 450 mm with integral foot rest to pedestal pan, including all joints, complete assembled all as specified and directed.
S&F, in repair vitreous China squatting pan 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specifeid and directed by engr-in-charge.
S&F vitreous China squatting pan 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specifeid and directed by engr-in-charge.
S&F vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting pinnning in ends of brackets or erecting stand but exclusive of fixing, complete assembled all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting pinnning in ends of brackets or erecting stand but exclusive of fixing, complete assembled all as specified and directed.
S & F Vitreous China urinals size465 x 355 x 265 mm white (minimum),bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe alongwith fixing of 32 mm dia coupling complete
S & F Vitreous China urinals partition white of size 310 x700 mm with connection complete
S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
S&F In repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltrs all as specified.
S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltrs all as specified.
S&F, PVC connection of 15 mm sixe with PTMT nuts of length 600 mm , complete all as specified and directed by Engr-in-charge.
S&F Health faucet (ABS BODY) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m ong flexible tube & ABS wall hook including making connection & fixed In position complete in all respect as specified.
S&F CP Towel rail 20 mm dia, D type 60 cm long.all as specified & Directed
S&F in repair CP Towel rail 20 mm dia, D type 60 cm long.all as specified & Directed
S&F inrepair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and direceted
S&F inrepair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and direceted
Taking up or down steel tubing 20mm and connections, including cleaning for refixing or removal to store.complete all as specified
Taking up or down steel tubing 15mm and connections, including cleaning for refixing or removal to store.complete all as specified
S&F 25mm outer diameter 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
S&F 20mm outer diameter 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
S&F 25mm PPR Gate valves (brass insert) as per requirement of the site complete all as specified
M&L of 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified
S&F in repair 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors. complete all as specified and directed.
S&F in repair 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F PVC (SWR) 75 mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors. complete all as specified and directed.
S & F PVC (SWR) 110mm dia mtr bends any radius
S&F 75 mm PVC (SWR) bend any redius complete all as specified and directed.
S & F 110 mm PVC (SWR) junction (single T) equal or unequal complete all as specified and directed.
S&F PVC(SWR) reduer of 110 mm complete all as specified and directe
S & F PVC (SWR) vent cowl of 110 mm complete all as specified and directed.
Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). Complete all specified and directed
M&L 75mm thick PCC 1:4:8 type D2 under flooring , using 40mm graded stone aggregates as in sub base complete all as specified and directed.
M&L Chequered cement concrete with grey pigment cement and pigments tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors incl over 20mm thk screed bed in CM 1:4 complete all as specified and directed
Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays complete all as specified and directed.
S & F in repair puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.
S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.
Surface dresssing nexc 30cm deep and averaging 15cm deep in hard/dense soil and getting out.
Excavation in trenches n.exc 1.5 mtr wide & n.exc 1.5 mtr deep in hard/dense soil and getting out for foundation/ cable trenches complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm Thk in soft soil.
Removing excavated materialn. exc 50m and depositing where directed at a level n exc. 1.5m above the starting point
M&L for Cement concrete Type D-2, 1:4:8 mix using 40mm graded stone aggregae as in foundation fillings, mass concrete complete all as specified and directed.
M&L Precast cement concrete block masonry with solid blocks exc 20 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded aggregate).
M&L for RCC M-30 (Design Mix) (20mm graded aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs,under-reamed piles and mass concrete. complete all as specified and directed.
M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Columns,pillars, piers, posts and struts complete all as specified.
M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Beams, cantilevers,bressummers, lintels over 1.5m span all as Specified.
M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified.
M&L for Reinforced Cement Concrete type B1 1:2:4 (nominal mix ) (using 20 mm graded stone aggregate) Slabs supported on walls,beams and columns in floors, roofs and the like
M&L for Reinforced Cement Concrete type B1 1:2:4 (nominal mix ) (using 20 mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over1.5m span
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work.complete all as specified and directed.
M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions for fair finish, complete all as specified and directed.
M&L for Formwork to edges of concrete flats, breaks in floors, sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening
M&L for Formwork to soffits of flat surface suspended slabs such as roof slabs,floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finish surface complete all as specified.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunch-ings, lintels, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing the surface fair and even Complete all as specified and directed.
M&L 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finsihed the surfaces even and fair without using extra cement.complete all as specified and directed.
M&L 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smooth without using extra cement.
M&L Preparing of new surface of plaster and applying two coats of white wash on wall.
M&L for Preparing of new plastered surface and applying two coats cement base paints on walls complete all as specified.
M&L Preparing of new surface of plaster and applying three coats of white wash on ceiling complete all as specified.
S&F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.
M&L for hard core of broken stone of bouders n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true a surface
M&L 100mm Thk. PCC 1:4:8 type D2 under flooring , using 40mm graded stone aggregates as in sub base complete all as specified and directed.
M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floor complete all as specified and directed.
M&L for steel TMT bars, 10 mm dia and over , cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete
- Ditto as per above item but 6mm to 8mm dia.
M&L 15mm thick rendering on terrace, sides of parapet in cement mortar 1:4 with water proofing compound, finished even and fair.
S& F for 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F for 125mm aluminium handles, cast type ,anodised and pattern/design as approved.complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in paving / plinth protection finished even and smooth , without using extra cement incl necessary form work complete all as.
S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm Complete.
S&F grating doom 100mm dia PT MT weight 25gms complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of lenth 450mm complete, all as specified & directed.
S&F for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .
Construction of soakage well 1.2 m internal dia and 3.00m effective depth incl excavation in any type of soil , foundation in PCC 1:3:6 type C-1 ( using 20mm graded crushed stone aggregates ), PCC Block honeycomb/ solid masonry in cement mortar (1:4) RCC M-30 design Mix cover Slab filled with stone boulders including intersepting chamber screen chamber and disposal of soil complete all as specified and shown on drawings.
Constr of soakage well incl excavation in hard/dense soil, PCC 1:3:6 type C2,(using 40mm graded crushed stone aggregate) in foundation, hone combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25/ SFRC cover, inter connecting pipes of RCC /DWC complete filled with brick bat of size (3.00 mtr dia x 4.50 mtr deep).complete all as specified
Plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore SGSW pipes complete Note-Thickness of concrete bed shall be 100mm.
S&F 150mm dia SGSW pipe laid in trenches and jointed as specified
S&F 100 mm dia cast iron soil, waste and vent pipes in any length as specified.
M & L pre cast cement concrete block masonry solid blocks type C1 1:3:6 ( 20 mm graded aggregate) exceeding 10 cm width , set in CM 1:4 as in manholes all as specified and directed.
M&L Pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified.
M&L cement concrete type B0 1:2:4 (12.5 mm graded aggregate ) in cills, steps, seismic and other similar bands, plinth courses , string courses, lacing courses, parapets and railings upto 60 cm in height, copings kneelers, apex stone, bed plate, kerbs etc all as specified and directed.
Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.
Taking down of MCB DB/TPN 8way/12way including mcb sp and spn and making good of wall complete all as specified and directed.
M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
(a) One light point controlled by one 5 Amps one way switch
(b) One 3 pin socket outlet 5 Amps on independent board
(c) One 3 pin socket outlet 5 Amps on same board
All as per above item No but for one 3 pin socket outlet 15 Amps independent with cable of size 2.50 Sqmm for point wiring and 1.5 sqmm in continuous earth wire complete all as specified and directed by Engineer-in-charge.
S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.
S&F socket outlet 3 pin, 5 Amps, 1 flush type suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.
S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.
S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.
S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.
S & F in repair Lamp holder, PVC/Polycarbonate type with back plate straight ot angular, suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC rectangular block for mounting of switches, socket with 3 mm thick plastic laminated sheet cover of size 200x150x50mm complete all as specified and directed by Engr-in-charge.
S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.
S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed.
S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 2 way complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.
Supply and fixing MCB SPN 240V, 10KA 'C' curve 63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing Rechargeable LED Bulb 9 W, B22 (220-240 V) 50hz, 6500k fast charging 2200mAH battery inbilt, white color all as specified and as directed.
S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.
M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.
S & F exhaust fan 250 mm sweep plastic type ( make- Havells vent air DX or equivalent ) all as specified and directed.
Taking up the existing cables from trenches of any size all as specified and directed.
Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 10 sqmm 2 core complete all as specified and directed.
Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed by Engineer-in-Charge.
M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.
Deduct Schedule of Credit of Rs (-) 84359.70 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
M/S LIBE & CO
M/S Behl Sons
M/S MA CONSTRUCTION Co
M/S BHAT ENGINEERS
M/S ASGAR ALI TIMBER SHOP
M/s Aman Enterprises
osho traders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .