8885 REPAIRS / REPLACEMENT OF UNSERVICEABLE LT UG CABLES, LT PANELS / FEEDER PILLARS, MCCBs AND ALLIED WORKS AT KANDIVALI AND MARVE UNDER GE NORTH MUMBAI

Amount

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation, cable trenches etc, not exceeding 10 sqm on plan and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Supply and spread and levelling in trenches fine dry river sand for cable cushioning and gently punning down in layers complete all as specified and as directed by Engineer-in-Charge Note : Thickness of sand cushioning shall be measured after punning and consolidating of sand.

Supply and lay unreinforced precast concrete cable covers, class LV type, flat of size 250 mm x 150 mm x 40 mm complete all as specified and as directed by Engineer-in-Charge. Make : Mehtab Tiles, Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles, Jodhpur

Supply, lay, test and commissioning of UG round cable of following sizes of XLPE insulated, heavy duty, LT, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, as per IS-7098 part-I, laid in trenches or passing through pipe, making all connections with necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge. Make: Cable Corporation of India, Mumbai / Universal / Polycab / Gloster / Finolex / Havells Note : Earthwork, excavation sand cushioning cable cover GI protection pipe shall be measured and paid separately in their respective items

16 sqmm x 2 core

16 sqmm x 4 core

35 sqmm x 3.5 core

50 sqmm x 3.5 core

95 sqmm x 3.5 core

Supply and fix in repair cable jointing kit for 1100 V grade cable for straight through cable joint kit complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of following sizes complete all as specified and directed by Engineer-in-Charge. Make: Densons/ M Seal/ Raychem/ Siemens/ Birla 3M/ Mahindra & Mahindra

25/35 sqmm x 3.5 core

50 sqmm x 3.5 core

70 sqmm x 3.5 core

95 sqmm x 3.5 core

120 sqmm x 3.5 core

185 sqmm x 3.5 core

Material and labour for 100mm thick plain cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in hard standing flooring finished even and fair complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs copper strip bus bar chamber 63 Amps 4 pole 415 volts with all fixing accessories etc complete all as specified and as directed by Engineer-in-Charge. Make : BELNO Cat Part No BEBB032 / Havells / L&T / Legrand

Supply and fix in repairs copper strip bus barchamber 100 Amps 4 pole 415 volts with all fixing accessories etc complete all as specified and as directed by Engineer-in-Charge. Make : BELNO Cat Part No BEBB032 / Havells / L&T / Legrand

Supply and fix in repairs 2 single core wiring for street light fitting complete of 2.5 sqmm single core PVC insulated and unsheathed copper conductor cable 1100 volts grade drawn through and including PVC conduit of size 20mm as directed by Engineer in charge including accessories and fixed on walls and connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge. Note :-Two runs of 2.5 sqmm cable, one run of PVC conduit will be measured and paid as one unit length. Make: Finolex / Plaza / Anchor / Havells / Polycab

Supply and fix GI pipe, light grade, 40mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary including taking down existing etc complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Supply and fix GI pipe, light grade, 50mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary including taking down existing etc complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Material and labour for finding cable fault with electronic fault detector in LT UG cable of size 50 to 150 sqmm x 3.5core complete including necessary earth work excavation all as specified and as directed by Engineer-in-Charge.

Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth strip 25 x 3mm, 7.5 m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate and protected by 32 mm bore light grade galvanised iron pipe complete all as shown in electrical plate No.3 of MES schedule Part I, 2009 with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

Identifying the area controlled by existing feeder pillar panel and writing the details on panel board with synthetic enamel grey colour paint and stencil of appropriate size complete along with distribution of phase equally in all the phases with the help of Ammeter, cleaning of panel board by blowing compressed air, removing all dust, cleaning the contacts with methylen dichloride etc complete all as specified and as directed by Engineer-in-Charge. Note : One complete panel will be measured as one job

Supply and fix MCCB 4 pole, 250 Amps, 415 Volts, 50 Hz, 36 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider Cat Part No LV431640 / Havells / L&T / ABB / Legrand / Siemens

Supply and fix MCCB 3 pole, 160 Amps, 415 Volts, 50 Hz, 36 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider Cat Part No LV431630 / Havells / L&T / ABB / Legrand / Siemens

Supply and fix MCCB 3 pole, 125 Amps, 415 Volts, 50 Hz, 36 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider Cat Part No LV431631 / Havells / L&T / ABB / Legrand / Siemens

Supply and fix MCCB 3 pole, 100 Amps, 415 Volts, 50 Hz, 25 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider Cat Part No LV429550 / Havells / L&T / ABB / Legrand / Siemens

Supply and fix in repairs Analog timer switch, single phase, 240volts complete all as specified and as directed by Engineer-in-charge. Make: L&T Cat Part No J6107B204 / Havells / Schneider / ABB / Legrand / Siemens

Supply and fix in repairs ML2 three pole power contactor (2NO + 2NC) coil voltage 415 volts 50 Hz complete all as specified and as directed by Engineer-in-charge. Make: L&T Cat Part No SS90701 / Havells / Schneider / ABB / Legrand / Siemens

Material and labour for cutting the existing bituminous road / hard standing to size not exceeding 30cm wide and depth not exceeding 60cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm thickness with plain cement concrete 1:3:6, type C1 using 20mm graded aggregate complete all as specified and directed by Engineer-in-Charge.

Material and labour for boring of holes 100mm dia at 1.00m depth under road, pavement, hard standing by trenchless technology using ultra sound technique with machine etc complete all as specified and directed by Engineer-in-Charge.

Supply, install, test and commission LED street light fitting 1 x 45 watts, pressure die cast aluminium housing, Heat resistance toughened glass with frame, IP 66 protection, better optics for uniform distribution complete with necessary copper wire connection of suitable size including taking down of old unsv light fitting with bracket complete all as specified and as directed by Engineer-in-Charge. Make - Sakti Cat Part No SZPSLPM045 or Equivalent in CG / Philips / Havells / Halonix / Benlo

Supply, install, test and commission LED street light fitting 1 x 60 watts, pressure die cast aluminium housing, Heat resistance toughened glass with frame, IP 66 protection, better optics for uniform distribution complete with necessary copper wire connection of suitable size including taking down of old unsv light fitting with bracket complete all as specified and as directed by Engineer-in-Charge. Make - Sakti Cat Part No SZPSLPM060 or Equivalent in CG / Philips / Havells / Halonix / Benlo

Supply and fix in repairs cable junction box IP66 protected outdoor installation of size 200 x 160 x 98mm with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32- 2 Nos) fixed on poles with flat iron clamps of size 25x3mm, nut, bolt, washers etc including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and provision of one single pole MCB 6 amps for controlling light etc complete all as specified and as directed by Engineer-in-Charge. Make : Sintex GS-JB-2014 or equivalent in National

Material and labour for complete removal of existing paint of feeder pillar box of any size including preparation of outer surface and applying two coats of aluminium paint over a coat of red oxide primer etc complete all as specified and as directed by Engineer-in-Charge.

EVEREST POWER CONTROL ENGINEERS

ELECTRO ASSOCIATES