SPECIAL REPAIRS TO DSC Md ACCN AT AFS THANJAVUR (PH-III).

Amount

Demolition of cement concrete of any description and in sunken floor /roof padding etc not otherwise specifically provided complete all as specified and as directed.

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in filling in sunken floors/roof padding complete all as specified and as directed.

M&L PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by weight of cement complete all as specified and as directed.

M&L 12 mm thick Plaster on RCC roof slab with CM ( 1:4 ) including water proofing compound @ 3% by weight of cement complete all as specified and as directed. Note for SI Item No 03 & 04 : WPC shall be measured and paid separately.

M&L preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3kg/sqm including removal of existing water proofing treamant on sunken slabs, edges and vertical surfaces complete all as specified and as directed.

M&L applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over APP membrane surface complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and as directed.

M&L rendering in two layer i.e.5mm thick in CM 1:4 mixed with water proofing compound over 10mm thick in CM (1:6) on concrete/brick masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately

M&L 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC brick work surfaces of walls finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L 5mm thick plaster in CM (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of chalk white primer including leveling the surface with cement putty etc complete all as specified and as directed.

M&L preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L preparation on newly plastered external wall surface and applying two coat cement base paint over a coat of chalk white primer complete all as specified and as directed..

M&L complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 3 mm average thick wall care putty and applying two coats of oil bound distemper over one coat chalk white primer including filling of cracks, holes and including leveling the surface with wall care putty etc. complete all as specified and as directed.

M&L preparing old plastered surfaces of ceilings and applying one white wash including filling of cracks, holes etc. with cement putty complete all as specified and as directed.

M&L preparation of old surfaces of wall and applying one coats of cement base paint complete all as specified and as directed.

M&L ATT post construction bldg along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L ATT providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.

S&F glossy finished heavy duty chequered cement concrete tiles 20cmx20cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:4) in floors complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 Sqm and n.exc 2 Sqm each complete all as specified and as directed.

Taking down shutters of any description exe 1.0 Sqm and n.exc 2 Sqm each & refixing in same/other opening complete all as specified and as directed.

S&F flush shutter 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and as directed.

S&F 30mm thick, IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive gauze, etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening complete all as specified and as directed.

S & F Factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick (style)with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed.

S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

M&L 19 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work as incub board, kitchen cabinets (with anti termite proof) complete all as specified and as directed.

M&L 1.5 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufaturer's instructions complete all as specified and as directed.

S&F aluminium track on bottom rail for uPVC / wooden cabiets holding shutter on frame complete all as specified and as directed.

S&F zinc alloy rollers for uPVC doors/ wooden cabinet door shutters complete all as specified and as directed.

S&F auto hinges stainless steel suitable for kitchen cabinets,CB, Shelves etc complete all as specified and as directed.

S&F butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and as directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated types, anodised, each 100mm long complete all as specified and as directed.

S&F Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt extruded section 75mm long complete all as specified and as directed.

S&F extruded aluminium anodised 75mm long hasp and staple, safety type incl bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded type or cast aluminum alloy complete all as specified and as directed.

M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparing old wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality description) from wooden frame or stone concrete or bricks surrounding glazed with putty or fixed in beads n.exc. 1.5 Sqm in each pane complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square/ rectangular n.exc 0.5 Sqm each pane complete all as specified and as directed.

S&F 4 mm thick Figured glass ordinary quality and glazing with oil putty in square/ rectangular n.exc 0.5 Sqm each pane complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and double tongue, anodised with hard drawn spring of 140 mm size fixed in floor complete all as specified and as directed.

Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25 mm thick over cement screed bed of CM (1:4) with 20 mm thickness laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Description all as per item No 48 here-in-before but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and as directed.

Description all as per item No 52 here-in-before but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed.

M&L glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and as directed.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Description all as per srl item No 57 here-in-before but 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

S& F 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

S& F 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F Rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of dia 25mm (Minimum weight 455 gms) complete all as specified and as directed.

Dismantling of 110mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out complete all as specified and as directed.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and as directed.

Dismantling of 90 mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out complete all as specified and as directed.

S&F 90 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F 90 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

Dismantling of 75mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out complete all as specified and as directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) grade bends with access door of any radius complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia complete all as specified and as directed.

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs vitreous china counter wash hand basin ovel shape of size 550x 400 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed.

S&F in repairs bib taps (15 mm bore dia) long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe complete all as specified and as directed.

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed.

S&F in repairs stop cock (15 mm bore dia) cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union with long shank and cup complete all as specified and as directed.

S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified and as directed.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange complete all as specified and as directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring jointslaid in trenches and in floor etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and as directed.

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified and as directed.

S& F in repairs 20mm dia, Harrison rails, powder coated anodized aluminium alloy with fixing curtain brackets, stops, rollers etc complete all as specified and as directed.

S&F in repairs wardrobe aluminium hooks set of six, 50mm to 60mm width complete all as specified and as directed.

S&F in repairs for plate rack of stainless steel of size 600X600X250 mm with steel sleeve & hanging arrangement for utensil complete all as specified and as directed.

S&F in repairs chromium plated overhead shower rose for 15 mm bore dia & shower arm with or without swivel joints fixed to 15mm bore of pipe complete all as specified and as directed.

M&L preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed.

M/S. SRI RAMANUJA CONSTRUCTIONS (BID ID -3469424)

NITHYASRI AND CO (BID ID -3474500)

Bidder Name

NITHYASRI AND CO