Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹21.9 L+₹2.1 L (10.6%)Rejected-Finance | L2 | Rejected-Finance BIDDER NOT LOWEST | |
| 3 | L3₹22.0 L+₹2.3 L (11.5%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance BIDDER NOT LOWEST | |
| 4 | L4₹25.1 L+₹5.3 L (26.8%)Rejected-Finance | L4 | Rejected-Finance BIDDER NOT LOWEST | |
| 5 | L5₹25.8 L+₹6.0 L (30.6%)Rejected-Finance FLAT NO 744 RAMA APARTMENTS PLOT NO 2 SECTOR 11 DWARKA NEW DELHI 110075 | SOUTH WEST | DELHI | 110075 | L5 | Rejected-Finance BIDDER NOT LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Aug 2021, 6:00 pmClosed
GE WEST DELHI CANTT 10
GE WEST DELHI CANTT 10
REPAIR TO ROOF TREATMENT GUNITING WORK PARAPET RCC CHAJJA LEEKAGE SEEPAGE SUNKEN FLOOR AND CONNECTED WORKS IN MD ACCN OF VIKRAM BATRA VIHAR IN THE AREA OF AGE BR II WEST UNDER GE WEST DELHI CANTT 10
2021_MES_434681_1
GE/DW-17/2021-22
Open Tender
Civil Works
Item Rate
270 days
DELHI CANTT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE WEST DELHI CANTT
₹90,000
22 Sept 2021
27 Jul 2021
30 Aug 2021
28 Jul 2021
23 Aug 2021
11 Aug 2021
Amount
Dismantling of brick tiles or terracing tiles single layers as on roof including removal of rubbish beyond MOD land complete all as specified and directed.
Demolition of mud phuska in roof any thickness including plastering and leeping etc including removal of rubbish beyond MOD land complete all as specified and directed.
M&L PCC 1:2:4 type B0 (12.5 mm graded stone agg) as in roof padding etc complete all as specified and directed.
M&L for cleaning top surface or cement concrete surface with Wire brushing including flashings and junction of parapets, etc, including taking down old APP membrane / existing roof treatement including removal of rubbish beyond MOD land complete all as specified and directed.
M&L for applying water proofing treatment as following:- (a) 15mm cement plaster with cement mortar 1:4 on roof surfaces (b) A coat of bitumen primer @ 0.40 Kg/Sqm on prepared surface of plaster and applying a coat of bitumen 85/25 grade @1.2kg/Sqm (c) Applying APP based polymeric membrane minimum weight 3.50 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric/wt not less than 150 gm/Sqm and sealing joints by torched application bitumen.
M&L for 40mm thick brick tiles terracing over and including bedding layer of cement mortar 1:6, 15mm thick, including jointed and grouted in cement mortar 1:6, flush pointing in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.
All as item No 6 but Except tiles
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone Aggregate) as in bed blocks for gola, hold fast, coping bedding rounded or chamfered complete all as specified and directed.
M&L Raking out joints/pointing to brick or brick tiles, laid flat, in floors, surface channels, roofs, etc and including flush pointing to brick tile laid flat or brick tiles in pavings in cleaning and joints grouted flush in cement mortar 1:3 mixed with 5% cruide oil by weight of cement, complete all as directed and specified.
Taking down and re-fixing of 40mm thick brick tiles terracing including jointed and grouted in cement mortar 1:6, flush pointing in cement mortar 1:3 mixed with 5% of crude oil by weight of cement and including including removal of rubbish beyond MOD land complete all as specified and directed.
M&L guniting work including dismantling loose concrete cover of RCC coloums, beams slabs, Chajjas, and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 43 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 2% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine including necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed.Notes for item No. 11(i) Where ever steel reinforcement bars are required to be provided the same shall be measured and paid separately under relevant items.(ii) Before placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and allow to dry. To this prepared surface apply chemistik polycrete admixture at the rate of 3% by weight of cement or all as per manufacturers instructions.(iii) When polymix coating is in tacky condition guniting is done with polycrete admixture at the rate of 2% by weight of cement or all as per manufacturers instructions. Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer.(iv) Cost of all above aspects shall deemed to be included in the quoted rate of item and nothing extra shall be paid on any account.
S&F for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Demolition of cement concrete (unreinforced) /sunken floor in ground floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and directed.
M&L for sunken treatment as following over it complete all as specified and as directed:- (a) Rendering 10 mm thiick in CM 1:4, (b) Two coats of tapecrete mixed (1:2) with cement slurry @ 3Kg/sqm per sqm or as per manufactures's instruction, surface finished even and smooth (c) Applying a coat of bitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm (d) Applying one layer of 0.5 mm thick fibre tissue/APP membrane
M&L for PCC 1:5:10 type E-2 (40 mm graded stone agg) as in sunken floors complete all as specified and directed.
S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.
S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. complete all as specified and directed.
S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.
Demolition of reinforced cement concrete as in chajja, kitchen slab, chullah hood, chimney portion, manhole cover and similar work n.exc 15cm thick and removal of rubbish beyond MOD land complete all as specified and directed.
Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.
M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed.
S&F 1.00 mm thick plain black mild steel sheeting in as in door shutter covering including, welding or soldered joint complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in sun shade/roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed.
S&F 100mm size butt hinges medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.
S&F 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of surfaces complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed.
M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.
All as per srl item No 30 above but except brick.
M&L 10mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair without using extra cement complete all as specificed and directed.
M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair mixed with liquid WPC as per manufacturer's instructions complete all as specified and directed. (Note : Rate of WPC included in quoted rate and nothing extra payble on this acount).
M&L 5mm thick rendering with ready mix mortar of approved make on ceiling surface finished even and smooth without using extra cement as whole or in patch including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.
M&L rendering 15mm thick in cement mortar (1:6) finished even & fair on brick/concrete surfaces including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.
M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair mixed with liquid WPC as per manufacturer's instructions including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed. (Note : Rate of WPC included in quoted rate and nothing extra payble on this acount).
M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.
M&L preparation of surfaces and applying two coats of cement base paint over a coat of primer on external surfaces of walls complete all as specified and directed.
M&L preparation of surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of primer all as specified & directed.
M&L preparetion of old decorated plastered surfaces of walls etc by complete removal of existing treatment including washing, rubbing down and stopping of surface and applying two coats of oil emulsion distemper on wall surfaces complete all as specified and dircted.
M&L for preparation of old painted surface and applying two coat of weather proof exterior acrylic emulsion paint of approved make & shade including necessary scaffolding /Ladder etc complete all as specified and directed.
M&L for applying wall care putty not more than 1mm thick on wall / ceiling even and smooth surface complete all as specified and directed.
M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.
M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed.
M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F with 3mm thick ordinary sheet glass fixed with clips and putty complete in squares not exc 0.50 sqm each pane including hacking out old broken glass of any thickness/size of any description from wood/steel frame fixed with clips and putty, complete all as specified and directed.
S&F in repairs 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Disconnecting exsiting water storage tanks of capacity exc 250ltr and n exc 500 ltr, removal of unusable tank from site complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. with necessary chemical / bleaching powder, capacity upto 500 ltrs including refixing in position complete all as specified and directed.
S&F 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and directed.
M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish beyond MOD land complete all as specified and directed.
M&L Non skid ceramic coloured joint free tiles 400mm x 400mm 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.
Taking up or down 15mm bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting/chasing and making good in CM 1:3 in wall/floor complete all as specified and directed.
S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.
Fixing only tubes 15mm bore any grade to walls and ceiling or laying in floors
Taking up or down 20mm bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing and making good in CM 1:3 in wall/floor complete all as specified and directed.
S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.
Fixing only tubes 20mm any grade to walls and ceiling or laying in floors
S&F 75mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc removal rubbish beyond MOD land complete all as specified and directed.
All as per item 60 but 110mm bore
S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.
All as per item 62 but 110mm bore
M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed.
Surface dressing not exc 15cm deep and getting out in soft/loose soil including site clearance including removal of rubbish beyond MOD land complete all as specified and directed.
S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cement mortor complete all as specified and directed.
All as per item 66 but 100mm bore
S&F CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with paralled branches complete all as specified and directed.
S&F 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and directed.
All as per item No 69 above but 75mm bore.
S&F in repairs 20mm bore dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed
S&F in repair cover suitable for 500ltr capacity water storage tank complete all as specified and directed.
S&F in repairs 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-0 (12.5 mm graded stone aggre) as floors finishing surfaces even and smooth using extra cement complete all as specified and directed.
Removal of Vegetation from approachable/unapproachable roof of block and surrounding walls by cutting shrubs, wild growth/tree not exc 30cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick walls and making good the disturbed surface with PCC 1:2:4 type B-0 or CM 1:3 as directed and disposing the rubbish beyond MD land complete all as specified and directed
Cutting and taking out plants, tree roots from Md Accn bldgs in any position and height and treated with necessary chemical/acid to avoid for this growth and making good the disturbed portion with PCC 1:2:4 type BO including finishing etc complete all as directed and specified. (Note: The cost of scaffolding required for repairs is deemed to be in the quoted rate by the Contractor).
Deduct Credit: for demolished/dismantled material of (-) Rs 59321.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.
M/S DSSP Construction Co.
Vipul Construction
PRAHLAD NARAIN KOLI
Chandramauli Engineers Pvt. Ltd.
M/S Yamin
M/s M M BAHL
Baljeet Builders & Interior Decorators
cuckoo enterprises
DR Buildcon
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .