GE/BAS-16/2024-25 Repair to fencing, foot path, gate, boundary wall and drain at Basoli Mil stn under GE Basoli

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing ,dressed stone work and precast concrete article complete all as specified and directed.

M & L walling of random rubble stone maronary uncoursed well bonded, bedded and solidly hearted built in CM (1 : 6) complete all as specified and directed.

All as per item No -02 here-in-before but except stone.

M & L brick work with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:4) complete all as specified and directed.

All as serl item No 04 here-in-before but except brick

M & L brick work with subclass 'B' bricks straight or curved on plan in any radius in half brick thick built in CM (1:4) complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against dressed surface not exceeding 40mm to face stones and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought up to courses complete all as specified and directed.

M & L for Flush pointing to random rubble stone masonary uncoursed in CM (1:4) complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

M & L cement concrete (1:2:4) type B-2 using 40mm graded crushed stone agg as in drains beds and surface channels etc including demolition of existing PCC complete all as specified and directed.

M & L rendering 15mm thick on stones masonry surfaces or Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement including taking down cement plaster complete all as specified and directed.

M & L rendering 15mm thick on stones masonry surfaces or Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

S&F MS works as in fencing posts and struts including cutting tops to bottom shape as directed, drilling holes notching for wire etc flat iron fillets for securing razor wire etc incl all drilling bolting riveting etc and similar works conforming to Fe- 290 gde E-165 complete all as specified and directed.

All as per item No 15 here-in-before, but fixing only

S&F Mild steel 10/12mm dia round bars as in strengthening of chain link fencing complete all as specified and directed.

Supply only chain link fencing of oblong wire mesh size 100x100mm with weight not exc 4 Kg/Sqm all as directed (Note- dia of main bar 4mm and cross bar 4mm) complete all as specifed and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specifed and directed.

Dismantling expanded metal, any thckness or mesh, any type of weightnot exc 4.00 Kg/Sqm, fixed with steel or wood fillets complete all as specifed and directed.

M&L Applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

S & F in repair galvanised 2 strand steel barbed wire 2-24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galcanized mild steel wire staple or steel pins (Each line of wire to be measured) complete all as specified and directed.

Restraining and resecuring of steel barbed wire fencing including making good staples etc complete all as specified & directed (each line of wire to be measured separately) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 100 mm thick PCC 1:3:6 type C-2, using 40 mm graded crushedstone aggregate,as in sub base of floor complete all as specified and directed.

M&L for Sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and directed .

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed .

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 80mm thickness with grey cement and pigment, M-40 grade complete all as specified and directed .

50mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregates as in sub bases of floors and pavings complete all as specified and directed.

M & L colour chequrred cement tiles with grey cement and pigment 30cmx30cmx25mm thick set, jointed in neat cement slurry including 15mm thick screed in CM1:4 complete all as specified and directed.

M & L for Furastone / Endura heavy duty virtified tiles of size 322mmX322mmX9.5mm mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pointed in white cement with pigment over 15 mm thick screed bed of 1:4 cement mortar complete all as specified and directed.

M&L Preparing old plastered or unplastered surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

M&L Preparing old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

Preparation of new/old plastered surfaces Applying Two coats of Apex emulsion paint as on walls/roof projection/chajjas complete all as specified and directed.

Preparation of old plastered surfaces Applying one coat of Apex emulsion paint as on walls/roof projection/chajjas complete all as specified and directed.

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum in any type of soil, getting out, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm in any type of soil complete all as specified and directed.

Mild steel TMT bars 10mm dia cut to length, bent to shape required incl crancking bending and hooping ends with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling structural steel work including doors , gates and any type of angles complete all as specified and directed

S&F MS framed work conforming to Gde Fe 410-W as in doors or gates of angle or other section with gussetplates ,rails ,braces .etc complete drilled for fixing of steel sheeting or other covering .Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive steel sheeting) complete all as specified and directed.

S & F 0.80 mm thick mild steel plain black sheet in wall claddiing steel gates and similar works , cut to size holes punched including round headed screws fixed steel framing with plain 40 mm lap joints with riveted or welded seams including bending complete all as specified and directed

S & F in repair Punched tape concentrina coil of dia of coil 600 mm ,56 loops, 2.5 mm core wire,heavy galvanised ( wire 275 GSM),tensile strength of wire 1400-1500 N/sqmm ,Streatchable length 12 mtr including securying or tying at crossing with and provision of galvanised mild steel wire ,,staples or steel pins etc including taking down old concentrina coil complete all as specified and directed

Demolition of Reinforced Concrete in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Providing precast cement concrete type B-1 1:2:4 using 20 mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drain cover etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles and set in CM 1:6 with plain face, complete all as specified and directed.

PCC 1:2:4 type B-0(using 12.5 mm graded stone aggregate) as in channels /coping & benching of manhole, laid to shape and slope, surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and directed.

Dismantling posts or struts Precast R.C.C.) any section, including taking out embedded portion of concrete and making good disturbed ground complete all as specified and directed

Standard engineers (BID ID -3070233)

KHOSLA ENGINEERS BUILDERS (BID ID -3070432)

M/S YOGESHWAR ASSOCIATES GOVT CONTRACTOR (BID ID -3070337)

M/S VIJ CONSTRUCTION CO (BID ID -3070841)