TP1-23/2023-24

Amount

Providing bund for arresting seepage of sewage water including cost of all materials, labour, lead, lift etc., complete as directed by the Engineer at site.

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand , silt or other loose soil,wet sand , or silt not under water,light black cotton soil, sandy loom and ordinary soil including excavated earth

Hire charges for JCB for clearing bushes and scrub jungles and levelling the site including all labour, fuel charges etc., complete.

Supplying and filling in foundation and basement with filling sand in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Filling in foundation and basement with excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Transporting the surplus excavated earth, debris etc away from the site to a lead of 5km including cost of all lead, lift, conveyance , loading, unloading etc.complete

Providing Antitermite treatment in four stages i) Immediately after ewe and before laying of foundation concrete ii) before refilling sides of foundation iii) Before laying of flooring concrete and iv) outside of basement upto 1m alround the building with approved anti termite chemicals as specified by the manufacturer including cost of all materials, lead etc.complete.

Providing and laying PCC 1:4:8 mix using 40mm HBG machine crushed metal for foundation concrete including cost of all labour, materials, lead, lift, curing etc.complete.

Supplying, spreading, filling, watering, consolidation of good earth for lowlying area including cost of well gravel, labour for consolidation, watering lead, lift, etc. complete.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Raft

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Grade Beam

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Column up to Basement/ground floor

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Plinth Beam

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. RCC Wall

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Cast in situ slab

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Lintel in GF

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Sun shade

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Staircase

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Roof Beam

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement. Roof Slab

Plain cement concrete 1:3:6using 20mm HBG Stone including cost of all materials lead and lift etc complete.

R:C:C 1:1:5:3 using 12 to 20mm metal without form work for Raft including cost of all materials, curing, labour, lead, etc., complete.

RCC 1:1.5:3, with 20mm HBG m/c metal with form work for RCC compound wall column, retaining wall, Power cable duct, and including cost of all materials, all labour, lead, lift, form work, all T&P's etc. complete (But excluding the cost of steel reinforcement)

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire etc. complete.

Brick work in CM 1:4 (one cement & four sand) for partition wall using Fly ash bricks of size 230*110*70mm including finishing, curing etc.complete complying with standard specification for partition wall as directed by Engineer incharge. Ground Floor

Brick work in CM 1:5 (one cement & five sand) using Fly ash bricks of size 230*110*70mm including finishing, curing etc.complete complying with standard specification as directed by Engineer incharge. Foundation & basement

Brick work in CM 1:6 (one cement & Six sand) using Fly ash bricks of size 230*110*70mm including finishing, curing etc. complete complying with standard specification - Super structure as directed by Engineer incharge. Ground Floor

Providing cornice and architectural elevation with Brick work in C.M.1:4using Fly ash brick of size 9" * 4 1/2" *3 " and cement mortar bands as per drawing and as directed by the engineer at site at all levels including cost of all materials,labour etc.complete.as directed by Engineer incharge.

Providing grooves of 25mm in the plastering for architectural elevation works etc complete as directed by Engineer incharge.

Supplying and laying in Hume pipe 300mm dia-NP3 for 11kV Cable, road crossing including cost of all materials, labour etc complete

Supplying and fixing MS angle, channel, Chequered plate, MS rail, etc wherever required as directed by the Engineer as per standard specifcation MS CHANNEL/MS Angle/Chequered plate

Supplying and fixing MS angle, channel, Chequered plate, MS rail, etc wherever required as directed by the Engineer as per standard specifcation MS Flats 60x8 mm for earth plate

Supplying and fixing MS grills, name bord ,hand rail,lader etc.at various levels as per approved drawing using channel, squar rods, ornamentel grill parts and flat including fixing in position with suitable hold fast locking arrangements etc.complete as per standard specification

Supplying and fixing ornamental steel flowers for MS grill gate including welding as per standard specification

Supply, fabrication , fixing in position of Collopsible gate for stair case using MS flats, wheels,etc as per standard specification including cost of all materials ,lead, labour etc.complete

Supplying and fixing of rolling shutter using 18 swg Tata steel MS sheet with gear operation including locking arrangements on both sides, centre lock with Keys, top hood, guides,gear arrangements, handles, applying metel primer one coat etc.complete as per standard specification.

Supplying and fabrication and fixing in position of anodised aluminium natural colour matt finish sliding window of size 1.18x1.48 m in two track in all floors with following sizes. All the two shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section of outer frames as shown below with necessary accessories such as rubber beading , handle,fixing 4mm thick clear sheet glass including all required for fabrication etc. complete. Necessary dimantling making holes in RCC columns , beams, masonry wherever necessary with power drill to the extent required and made good to the original condition after fixing as directed by the dept.Engineer. The Al. surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns. ( All materials should be got approved by the Executive Engineer) before fixing in position. Frame:-Bottom track 62x37 @1.218kg/m Side and top 62x31.5mm at 0.788 kg/m. Shutter section Bottom & top 40x18mm @ 0.38kg/m Plain side vertical 40x18mm @ 0.38kg/m. Inter locking vertical 40x18mm @ 0.632kg/m as directed by Engineer incharge.

Supplying and fixing in position of aluminium anodised colour matt finish fixed type Ventilator of size 1.18x0.58m Ntype in anodised aluminium rectangular type 63x37at 0.85kg/m with 4mm thick clear glass and aluminium mesh fixed with aluminium beading of size 17.15x17.27 at 0.178kg/m fixing rubber lining etc. including cost of all materials ,lead, lift and labour for fabricating and fixing in position including drilling RCC beam,column, etc complete. Aluminium frame is to be anodised with matt finish under the electrically controlled condition in accordance with ISS 1868/ 1962 specification for an average anodised thickness not less than 15 microns and as directed by the engineer at site.

Supplying & fixing cw doors with outer frame of size 100x75 mm and door shutters Solid core flush shutters with teak ply on both side with teak wood lipping alround 35mm thick both sides pre laminated with necessary adhesive and CP screws complying with standard specification . The rate inclusive of three coats of best quality varnish but including cost of furniture fittings such as 300 mm tower bolt 2 Nos. 200 mm tower bolt 1no. 300mm aldrop 1No.Aluminium arnamental handle 2 Nos.and 1No.door stoper etc.complete PVC Solid panneled door 0.75x2.1 with frame

Supplying and fixing in position of Sun control film in glazed windows of approved quality and brand including cost of all materials, lead, labour etc.complete.

Providing Heritage flaks finish for the exterior surface of building of approved colour at all elevation including cost of all materials, lead, lifts, labour,Scaffolding, equipments, sprayer, tools and mixed proprely as per the manufactures reccommantation, apply and finish properly etc complete.

Plastering in cm 1:3 mix 12mm thick for bottom of roof slab,bottom and sides of sunshade partition walls etcincluding cost of all materials ,lead, lift,watering,curing etc complete

Plastering with cm 1:5 mix using 12mm thick for inside and outside walls, plinth protection including cost of all materials,labour,lead, lift etc complete

Plastering with cm 1:4mix using 12mm thick for Partition walls including cost of all materials,labour,lead, lift etc complete

Plastering with cm 1:3 mix using 20mm thick for Floorings, plinth protection including cost of all materials,labour,lead, lift etc complete

Paving the control room floor with rectified vitrified core endura floor tiles (Industrial type floor of johnson endura make , quality, colour and shade as directed by the engineer at site) of size 600 mm x 600mmx12mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement mortar neatly finished as per standard specification .

Paving the floor with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement mortar as per standard specification .

Dadooing walls with glazed tiles of best approved quality of make Johnson, Nitco, Euro of size 300x200 mm over cm 1:3, 12mm thick including cost of all materials, labour, lead, lift etc complete

Paving the floor with Antiskid tiles for toilets (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Providing horizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials, scaffolding, lead, lift etc.complete. 150mm width

Providing horizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials, scaffolding, lead, lift etc.complete. 100mm width

Providing horizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials, scaffolding, lead, lift etc.complete. 75mm

Providing and laying white cooling tiles 300x300 size over screed concrete 1:3:6 with average thickness of 25mm for required gradient and using best quality of one course of weather proof tiles of approved quality using CM 1:3, 12mm thick and using 3mm spacer and pointing with water repellent U bond and grout inclusing cost of all materials, transport, curing, etc., complete.

Providing & fixing PVC Rain water down fall pipe of dia 110 mm OD 6kg/ cm2 with necessary Twclamps , plugs , shoes, bends,other clamps,screws,nails etc. etc complete complying with standard specification . The rate is inclusive of cost of removable iron grating

Supplying and fixing of wash basin of size 550*400mm with all accessories of approved quality Parry ware/Hindware including cost of wash basin with 15mm CP Piller cock fixing using rag bolt and nut 15mm dia nylon connection hose and outlet using 32mm dia pipe waste coupling waste pipe water pipe for outlet including 15mm control wheel valve,15mm dia brass nipple etc.complete as per standard specification.

Supply and fixing in position of Indian make white/ Colour glazed earthen ware lipped mouth flat back urinal of best approved quality of size 450mm Parryware/ Hindware with GI pipe connection to suitable length ,32mm bell mouthed PVC connection, 20mm dia GM wheel valve fixing the urinal to the wall including cost of all material, labour etc.complete.

Supplying and fixing in position Indian water closet of size 580X440mm white glazed earthern ware of approved quality Parry ware/ Hindware with P trap or S trap confirming to IS : 2556-Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete as per standard specification

Supplying and fixing in position white glazed European water closet of approved make Parry ware/ Hindware with 100mm P trap or S trap with double flapped regid PVC seat cover with CP brass hinges with 12.5 litres PVC low level flushing tank with all internal fitting etc.complete complying with standard specification, labour inclusive of fixing low level flushing tank and as directed by the engineer at site.

Supplying and fixing white marble stone of size 600*1200mm, 20mm thick for partition to urinals including cost of all materials, lead, lift etc complete.

Supplying and fixing in position PVC Nahini trap with Stainless steel gratings of various size with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime , two parts of sand and five parts of brick jelly and necessary provision etc. completed. as directed by Engineer incharge.

Supplying and fixing in position C.I.Manhole covers heavy duty of size 600x600mm of best approved quality and as per standard specification etc. complete

Providing inspection chamber for sufficent intervels throught the line size to a depth as below with proper gradent of the sewenine and BW in CM 1.5 with CI cover at too and bottom foundation PCC 1:3:6 using 40MM metal plastening with CM1:3 12mm thick and all lead lift etc complete 0.6X0.6m size to a depth of 0.90m

Supply and fixing of "Y" GI angle in the top of compond wall including cost of material and and fixing in the position as directed by the engineer at site including all material, labour, lead, lift etc., complete

Supply and labour charges for laying and tying of 4 rows of GI barbed wire in horizontal and vertical crossing at 0.45m intervals with semi circular curve at top and bottom, tensioning the same including cost of all materials, all labour charges, lead, lift, etc. complete.

Supplying, Fabricating and fixing in position of Steel gate in Purvankara 110/11 KV SS including cost of steel, labour, all T&P's etc complete and as directed by the Engineer at site

White washing with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed.

Painting 2 coats with approved Plastic Emulsion paint over one priming coat of plastic emulsion paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc.complete.

Colour washing Two coats inside walls using Interior emulsion paint ultima protek over a primer one coat and two coats of wall putty including cost of all materials, labour, lead, lift etc., complete.

Colour washing one coat Asian primer and 2 Coats over a base coat of primer using Exterior weather coat using Asian Royale Emulsion ultima protek, quality and colour for outer wall surfaces for all floors, staircase ceiling, carparking ceiling and portico area including cost of all labours to work at all levels cost of materials brushes scaffolding charges etc. complete complying with standard specification and as directed.

Painting new wood work with two coats of synthetic enamel paint of approved quality and colour over a priming coat including cost of all materials etc complete.

Painting new iron works with two coats synthetic enamel paint over one coat of primer including cost of all materials, lead, lift etc complete.

Fabrication and Labour charges for fixing of GI angles of 50x50x6mm size vertically @ 75cm c/c to the required length for supporting the cable in the cable duct in correct position including labour, cutting etc., complete as per the drawing and std.specification.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 140mm dia. 6kg/ sq.cm for bore well.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 140mm dia. 6kg/ sq.cm for bore well strainer pipe with slotted holes.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 110mm dia. 6kg/ sq.cm.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC pipe 75mm dia 6kg/ sq.cm.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC pipe 63mm dia 6kg/ sq.cm.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC pipe 50mm dia 6kg/ sq.cm.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC pipe 40mm dia 10 Kg/Sq.cm.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC pipe 32mm dia 10 Kg/Sq.cm.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC pipe 20mm dia 10 Kg/Sq.cm.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. HDPE pipe 32mm dia 10 Kg/Sq.cm for Borewell.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. HDPE pipe 25mm dia 10 Kg/Sq.cm for Borewell.

Supplying and fixing GM wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc.complete 32mm

Supplying and fixing GM wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc.complete 25mm

Supplying and fixing GM wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc.complete 20mm

Supplying and fixing of Specials of approved brand (leader) ISI quality including cost of all materials, labour etc.complete 32mm union

Supplying and fixing of Specials of approved brand (leader) ISI quality including cost of all materials, labour etc.complete 25mm union

Supplying and fixing of Specials of approved brand (leader) ISI quality including cost of all materials, labour etc.complete 20 mm union

Supplying and fixing best quality of belgium mirror of size 600*450 mm with soap tray towel stand screw and fixing near the wash basin with two round block including cost of all materials,lead ,lift etc complete.

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size 90 cm and fixing the same over teak world round block and soap tray (PVC) in bath room including cost of all materials, lead, lift, etc. Complete.

Supplying and fixing of SINTEX PVC water tank of 1000 litres capacity with necessary specials and fittings including cost of all materials , lead lift etc complete.

Supplying and fixing ornamental hand rail for front ramp portion in stainless steel 50mm dia pipe at top and 25mm dia two runs at middle and 40mm dia for verticals at every 1000mm c/c including cost of all materials ,lead, etc.complete. Fixed Type

Supplying and fixing ornamental hand rail for front ramp portion in stainless steel 50mm dia pipe at top and 25mm dia two runs at middle and 40mm dia for verticals at every 1000mm c/c including cost of all materials ,lead, etc.complete. Removable Type

Conducting Geophysical survey to assess the availability of ground water and to locate the place of bore well as directed by Engineer incharge.

Drilling borewell in hard rock 150 mm dia using power rig equipments including hire charges for power rig, labour etc.complete.

Supplying and filling with pebbles for annular space bet. Strainer pipe and earth surface including cost of all materials, lead,lift etc.complete.

Flushing the borewell with power rotary flushing eqipement including mobilisation and demobilisation etc.complete.

Supplying and erection of 1.5HP Texmo/Kirloskar/ sharp/ Suguna make jet pump with all accessaries , suitable L&T/ Siemens starter , L& T main switch , fuse,foot valve , etc. including cost of all materials as directed by the engineer at site, commissioning etc. complete for Borewell.

Supplying and erection of 1.5HP Texmo/ Kirloskar / sharp/ Suguna make Monoblock pump with all accessaries , suitable L&T/ Siemens starter , L& T main switch , fuse,foot valve , etc. including cost of all materials as directed by the engineer at site, commissioning etc. complete.(For Dewatering Duct water)

Providing 300mm dia flower pots containg green plants as directed by the engineer.

Supplying and fixing of ornamental design terracotta jolly in passage including cost of all materials, transportation, scaffolding and fixing in position using same colour mortar, lead lift etc.complete.

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12mm thick as per the requirement of Board including cost of all materials,aluminium letter, emblem, scaffolding etc. complete as directed by the engineer at site. TNEB Emblem

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12mm thick as per the requirement of Board including cost of all materials,aluminium letter, emblem, scaffolding etc. complete as directed by the engineer at site. 30 cm size letters

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12mm thick as per the requirement of Board including cost of all materials,aluminium letter, emblem, scaffolding etc. complete as directed by the engineer at site. 23cm size letters

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12mm thick as per the requirement of Board including cost of all materials,aluminium letter, emblem, scaffolding etc. complete as directed by the engineer at site. 15cm size letters

Supply and erection of RCC pre cast well rings of dia 1200mm, 300mm height and 50mm thick for construction of Rainwater Harvesting tank, Septic tank and Soak pit including cost of well rings, brick jelly, stone jelly 40,20,12,10mm and sand, etc., lead, lift, erection charges, labours etc., complete, as per direction and specification. - Supply and erection of well rings 1200mm dia for Rain water harvesting, Septic tank and Soak pit

Supply and erection of RCC pre cast well rings of dia 1200mm, 300mm height and 50mm thick for construction of Rainwater Harvesting tank, Septic tank and Soak pit including cost of well rings, brick jelly, stone jelly 40,20,12,10mm and sand, etc., lead, lift, erection charges, labours etc., complete, as per direction and specification. -Supply and fixing of top cover suitable for 1200 mm dia well ring

Supply and erection of RCC pre cast well rings of dia 1200mm, 300mm height and 50mm thick for construction of Rainwater Harvesting tank, Septic tank and Soak pit including cost of well rings, brick jelly, stone jelly 40,20,12,10mm and sand, etc., lead, lift, erection charges, labours etc., complete, as per direction and specification. For Exhaust fan rings 300mm dia

I. CONTROL ROOM - Supplying and Providig wiring for lights, fans,Duct lights etc., using with 2.5 M2m PVC insulated copper wire for phase and neutral and 1.5 M2m PVC insulated copper wire for looped earthing in 25mm rigid conduit .PVC casing not less than 25mm width and 2mm thickness of with necessary bends, Supplying and fixing of 5/15 Amps flush type switches fixed in a suitable GI anodised box with Hylem/ Sunmica sheet cover. The switch box of normal size 12"x8"x3" should be used. 1. 1200mm (48") AC ceiling fan =14 Nos 2 . Surface Mounted LED 100W= 8 Nos 3. Surface Mounted LED 36W = 18 Nos 4. 450 mm (18") dia Exhaust fan= 2 Nos 5. 600 mm (24") dia Exhaust fan= 4 No 6. Bulk head 10W LED LIght= 16 Nos 7. 24W LED Street light = 8 Nos 8. Ceiling Light 12 W LED = 4 Nos 9. 25W LED Gate light = 6 Nos 10. 120W LED Street light fitting= 4 Nos 11. Additional Heater lamps= 6 Nos ( provided at Backside of 33kV & 11kV VCB's by 200W incandescent lamp )

Supplying and providing wiring 5amp plug point using two runs of 2.5 M2m PVC insulated copper conductor along with 1.5 M2m copper wire for earthing and also including 5amps two in one socket controlled by 5amp flush type switch on suitable Switch Box and connections.

Supplying of switch board and wiring 2 runs of 4M2m PVC insulated copper wire and for earthing and connection with 15Amps switch and socket combined with 15 Amps plug and MS switch box size 6"x4"x3" for Battery point . This includes cost of materials and labour charges.

Supplying and providing wiring to motor room points from motor to starter switch boxes using 2 runs of 4M2m pvc insulated copper wire along with 1.5 M2m PVC casing/ PVC pipe not lessthan 25mm width with 2mm wall thickness including cost of materials , labour charges , switch board of size 18"x12"x3" with 16Amps doublepole mainswitch and providing sufficient pace for providing and connections.connections.

Supplying and providing wiring with 2 runs of 4 M2m PVC insulated copper wire alongwith 1.5 M2m PVC insulatd copper wire for earthing inside the PVC rigid conduit not less than 25mm width and 2mm thickness for running circuit main from DB to all Switch Boxes, motors and inverter. Neutral should not be looped.Neutral in back and earthing in green to be followed.

Supplying and fixing, testing & commissioning of 1200mm (48") AC ceiling fan complete set with electronic regulator and suitable down rod at 3 mts above floor level with connections etc.

Supplying and fixing,testing & comissioning of Surface Mounted LED fittings for 100W LED with necessary connections etc.,of suitable for control room.

Supplying and fixing, testing & commissioning of Mirror optical surface mounted light fitting with 2x2 36W LED Luminaire lamp and necessary fixing accessories of standard make and connections.

Supplying and fixing, testing & commissioning of 450 mm (12") dia AC Exhaust fan including wall bracket and accessories of standard make fixed on the wall and connections.

Supplying and fixing,testing & comissioning of 600mm (18") dia AC Exhaust fan including wall bracket and accessories of standard make fixed on the wall and connections.

Supplying and fixing, testing & commissioning of bulk head fitting with guard and 10W LED bulb for duct lighting with necessary connections etc.

Supplying, and fixing, testing and commissioning of 24W LED street light fittings.

Supplying and fixing, testing & commissioning of light fitting with 12 W LED Celing Light round surface mounted and necessary fixing accessories of standard make and connections.

Supplying and fixing,testing & comissioning of Gate light of post top lantern fittings of sylindrical or conical type suitable for 25W LED with necessary connections etc.,

Supplying and fixing,testing & comissioning of with 120W LED Tr.Street LIght fitting.

Supplying and fixing,testing & comissioning of 4W emergency light with rechargeable dry cell, necessary stand etc., by making connections through plug.

Supplying and fixing,testing & comissioning of earth electrode as per specification. 1.40mm GI Earth Pipe =3 mts 2.600x450x25mm RCC ring with cover=1 No 3.charcoal =15kgs 4.salt =10 kgs 5.Bentonite powder=50 Kgs

Bulb Additional Heater Incandescent 500 Watts

Supplying and fixing musical quartz type Wall Clock of size 30x30 cm of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Supplying and fixing Copper 4 core 6M2m armoured PVC cable including cost of all materials labour, lead, lifts, EWE and refilling etc complete for service connection with accessories.

Supply and fixing of AC / DC 7 mm Buzzer / call bell suitable for 230 V 50 c/s single phase AC supply on suitable TW board with push switch (SD 105).

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)