EEE-II/TC/2023-24/51.1

Amount

OD21107/2023-2024:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fittings like elbow, tees, flanges, tapers, nuts bolts, gaskets etc.and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as reqd. (a)100 mm dia

OD21106/2023-2024:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fittings like elbow, tees, flanges, tapers, nuts bolts, gaskets etc.and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as reqd. (a)80 mm dia

OD21131/2023-2024:Supplying and fixing First aid Hose Reel with MS onstruction spray painted in Post office Red,confirming to IS 884 complete with following as required. 20 mm (nominal internal) dia water hose thermoplastic(Textile reinforced) Type-2 as per IS:12585, 20 mm nominal internal dia gun metal globe valve & nozzle, Drum & brackets for fixing the equipment on wall, Connections from riser with 25 mm dia stop gun valve M.S pipe and socket . ( a)30 meter

OD21132/2023-2024:Supply, installation, testing and commissioning of non return valve of following sizes confirming to IS:5312 comlete with rubber gasket,GI bolts,nuts,washers etc. as required. (a) 100 mm dia

OD21133/2023-2024:Supply, installation, testing and commissioning of non return valve of following sizes confirming to IS:5312 comlete with rubber gasket,GI bolts,nuts,washers etc. as required. (a) 80 mm dia

OD21476/2023-2024:Fabricating , supplying, installation, testing and commissioning of wall mounted outdoor/canopy type duly compartmentalized cubical panel board, dust and vermin proof made of 2mm thick CRCA sheet hinged lockable arrangement, powder coated in approved shade, suitable for operation of 415 V,3Ph,50 Hz,AC supply with MCB 32A,TP 25 KA-1 no,contactor-16 Amp,over road relay,push button,indicating lights,voltmeter 0-500 volt meter 0-30 amp,Auto/manual switch 10 HP fully automatic suitable to operate 2 pumps complete as required.

122.1.30:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-4C*25 sqmm

122.2.151.(b):S & F following size of G.I. Socket. as reqd. 32mm

122.2.153.(b):S & F following size of G.I. Elbow. as reqd.. 32mm

OD21489/2023-2024:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size in the existing masonry open duct as required.(a) Up to 35sq. mm

OD21490/2023-2024:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (A)Upto 35 sq. mm (clamped with 1mm thick saddle)

OD21492/2023-2024:Supplying,installation,testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respect as required a) Horizontal type ,multistage,centrifugal,split casing pump of cast iron body & bronze impeller with stainless steel shaft,mechanical confirming to IS: 1520 b)suitable HP Squirell cage induction motor TEFC type suitable for operation 415 volts,3 phase 50 Hz.AC with IP 55 class of protection for enclosure,horizontal foot mounted type with class-'F' insulation,confirming to IS-325. c) M.S fabricated common base plate coupling,coupilng guard,foundation bolts etc. as reqd. d) Suitable cement concrete foundation duly plastered and with anti-vibration pads. 450 lpm at 35 m head

OD21518/2023-2024:Supply and fabrication of pole protection system made up of 8SWG steel wire mesh of size25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc as reqd.

OD22630/2023-2024:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.80 mm dai

OD22636/2023-2024:Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

OD27149/2023-2024:Supply and fixing of Photoluminescence Emergency Glow signages on aluminum sheet 2.0mm (+-10%) fixing on wall/ceiling complete in all respect.

122.2.150.(b):Supply, lowering and fixing following size of G.I. Pipe (M-Class) i/c cutting threading on both sides etc. ISI marked etc as reqd. 32mm(Nominal Bore)

122.2.111:supply and fixing of 4.5 KG DCP with CO2 gas cartridge fire extinguisher (conforming to IS:2171 with cylinder fully charged)

OD27298/2023-2024:Providing and fixing ABC( aluminium phosphate )power type fire extinguisher of 6kgs capacity complete in all respect with ISI marked i/c fixing arrangement etc. as required.

18.19.3:Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :3 way - 150 mm dia M.S. Pipe

18.20:Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

18.22:Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

18.23.1:Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.100 mm dia

18.12.5:Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :100 mm dia

18.11.4:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :80 mm dia

5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.