ADDITION/ALTERATION AND SPECIAL REPAIRS TO BLDG NO T-69 (A AND EHU HANGAR) AND PROVN OF DRAIN COVERS AT CERTAIN LOCATIONS

Amount

SCHEDULE A BOQ

Taking down Chowkhat or frame exc 1.5 Sq.m and n exc 4 Sqm each with shutter (with out taking off shutters from the frame) complete all as specified and as directed.

Supply and fix aluminium powder coated of three track sliding window outer frame top & sides (section no-20831) of size 92.0x31.75x1.5mm weighing 1.06 Kg/m, frame bottom (Section No 20832) of size 92.0x31.75x1.5mm weighing 1.248Kg/m , shutter to plain vertical (Section No 21093) of size 39x18x1.5mm weighing 0.634 Kg/m, shutter interlock vertical frame (section 21094) of size 39x18x1.55 weighing 0.734 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40x20x1.5mm weighing 0.484 Kg/m, with powder coating of min thickness 50 micron , sliding type with out sash bars, 4mm thickness colour glass, rubber packing, snap beading screws with stainless steel wire mesh, including taken down existing window with chowkats of any size, complete all as specified. Note:- (i) Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt. (ii) Thickness of powder coating shall be minimum 50 micron

M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge

M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat etc. complete all as specified and directed. Note: Minimum thickness of powder coating 50 micron.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, floor spring, handles 2 Nos in each doors, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. Note:-Glazing/gauzing and particle board work shall be measured and paid separately.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed

M&L 9mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame complete all as specified and as directed.

M&L Coloured tinted float glass and glazing, 4mm thick with oil putty in squares not exceeding 0.5 Sqm in each pane, with glazing clips and oil putty, complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 150mm complete all as specified and as directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 150mm complete all as specified and as directed.

S&F Aluminium body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed complete as directed by Engr-in-charge

S&F in repairs Aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed complete as directed by Engr-in-charge

S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS core complete all as specified.

S & F 125mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminum alloy and fixed complete all as specified and as directed.

Demolition of brick work built In cement mortar,including all quoin,arches.pillars etc but excluding ashlar facing,dressed stone work and precast concrete articles complete all as specified and as directed.

M&L Fly ash brick work using old size bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L applying two coats of oil bound distempering white or tinted or coloured over a coat of primer including preparation of old plastered or unplastered internal/external wall surfaces after complete removal of existing treatment complete all as specified and as directed

M&L applying two coats of oil bound distempering white or tinted or coloured over a coat of primer including preparation of new plastered internal/external wall surface complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado including 10mm thick back coat in cement mortar 1:4 complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.11 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as specified and as directed.

M&L Granite 18 to 20mm thick (table rubbed and polished) in steps, Jambs, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) Incl demolition of stone slabs all as specified and as directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white with fixing bolts including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed

S&F PVC valveless syphonic action type flushing cistern,10 Ltr capacity low level white with inlet ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density of PVC 32 mm dia, for low level cistern complete all as specified and as directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed

S&F CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe 15mm bore CAT Part No F1015161 of CERA or equivalent in Parryware ,or as per list of makes complete all as specified and as directed by Engineer-in-Charge

S&F Vitreous China wash basin, white, flat back, size 550 x 400mm excluding excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed

S&F vitreous china urinals half stall type white, with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back with cement (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S & F Chromium plated urinal spreader suitable for 15mm bore pipe complete all as specified and directed.

S&F Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F Pillar tap 15 mm cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F Stop valves 15 mm fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed

M&L grating doom 125mm dia with waste hole of SS (minimum weight 40gms) complete all as specified and as directed

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F CP Soap dish CAT Part No- F 5007106 of CERA or equivalent make of Parryware /Hindware complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern,10 Ltr capacity low level white with inlet ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density of PVC 32 mm dia, for low level cistern complete all as specified and as directed

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm excluding excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed

S&F in repairs vitreous china urinals half stall type white, with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back with cement (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F in repair Pillar tap 15 mm cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Chromium plated brass shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and as directed

M&L PVC (SWR) floor trap (dia of outlet 75mm), plain with grating including jointing with solvent cement complete all as specified and as directed

M&L PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed

S&F 3-layer 25 mm PP-R poly propyelene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls ceilings or in floors etc complete all as specified and as directed

S&F 25mm outer dia of pipe PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and as directed

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and as directed

S&F 110mm dia PVC (SWR) vent cowl complete all as specified and as directed

S&F 75mm dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75mm dia PVC (SWR) junction single, (single T), equal or unequal complete all as specified and as directed

S&F 110mm dia PVC (SWR) junction single, (single T), equal or unequal complete all as specified and as directed

S&F Brass chromium plated bottle traps 32mm bore dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed

S&F Coloured venetian blinds 100mm wide imported quality to windows horizontally hanging self designed with all fittings such as brackets, rollers, pulleys, curtain rods etc complete all as specified and as directed Make: Vista/Clams/MAC

S&F False ceiling using GI snap grid size 60x60cm with main runner 38x24,wall angle & cross tee 29x24mm wall angle 24x24mm suspended with 4mm dia GI Wire fixed with steel dash fasteners carrying max load upto 8.1 Kg/Sqcm with and including 8mm thick designer PVC ceiling board complete all as specified and as directed.

M&L 25 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to wooden frame work complete all as specified and as directed.

S & F Continuous (piano) hinges, 30mm, mild steel, bright finish or electrogalvanised complete all as specified and as directed

S&F Brass Locks 4 levers for Cupboard, Grade I, size 75mm complete all as specified and as directed

S&F 75 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 75mm Extruded brass handles, fabricated type polished complete all as specified and as directed

S&F external teak wood lipping, 6mm thick fixed with nails over particle board complete all as specified and as directed

S&F Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in all as specified and directed

S&F Pre painted Coloured corrugated Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws incl dismantling existing damaged sheets complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling existing damaged sheets complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface as in hard / dense soil complete all as specified and as directed.

M & L Cement concrete 1:4:8 type D-2 using 40mm stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed

S & F Steel work in tubular trusses/ post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 including dismantling existing steel complete all as specified and as directed

M&L MS Plates (Plain or chequered) channels (confirming to Fe 410 W Gde E-250 A quality), square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment including dismantling existing steel complete all as specified and as directed

M&L for Joist, channel, angle, or tee sections, fixed independently (confirming to Fe 410 W Gde E-250 A quality), without connecting plates, etc. including dismantling existing steel complete all as specified and as directed

S&F Pre painted Coloured corrugated Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L MS flat iron wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc. , and similar work conforming to Fe-290 Gde E-165 including dismantling existing steel complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n exc 5cm long diameter of neck 5 to 10mm complete all as specified and directed.

M&L Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and as directed

M&L hardcore of gauge not exc 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed

M&L 75 mm thick PCC (Plain cement concrete) type B-2 1;4;8 (40 mm graded aggregate ) as in sub base complete all as specified and as directed

M&L for Sand/M Sand filling under floors or in foundations including watering and consolidation Spreading and levelling in layers n exc. 25 cm thick complete all as specified and as directed

M&L for Screed bed or bedding layer of mortor 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed

M & L Chequered coloured Cement concrete tiles 30x30x25mm thick set, joimted and pointed in neat cement slurry with pigment in floor to match the surface complete all as specified and as directed

Providing and laying 80mm thick factory made cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed

S&F FRP Septic tank of 5000Ltr Capacity with upflow filter including filter media designed to carry sewage and sludge water and including excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete all as specified and as directed. The tank should have flexible inlet and outlet. Tank must have two compartment with provision of sediment collection in 1st compartment and only water should enter into the 2nd compartment. The 2nd compartment must have polymer superior quality ball ring media placed in such way it should enter neither 1st compartment nor the outlet pipe. Tank should have heavy duty designed to withstand the loaded sand even if it buried few meter below the ground level. Tank should be placed carefully to avoid tree root and other elements to enter into the tank. The manhole cover of the tank should be strong and airtight during usage.The performance of the advanced septic tank must be BOD reduction upto 70% in usage. The advanced septic tank should be durable, light weight, 100% ECO friendly, rust proof, leak proof and easy to install.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and as directed

M&L Providing precast cement concrete (PCC 1:3:6 type C-1) using 20mm graded stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar CM 1:4 complete all as specified and as directed

S&F 150mm dia uPVC pipes laid in trenches and jointed complete all as specified and as directed

M&L for Cement concrete bed in 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of 150mm bore of pipes after they are laid and tested complete all as specified and as directed

M&L Brickwork with fly ash bricks in one brick thick honey-comb walling, built in cement mortar 1:4 complete all as specified and as directed.

M&L for Loose filling of broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed

M&L TMT bars 6-8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed

Demolition of Reinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish material outside MD land complete all as specified and as directed

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish material outside MD land complete all as specified and as directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in complete all as specified and as directed.

M&L PCC 1:2:4 , type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L precast RCC 1:2:4, type B-1 using 20mm graded stone aggregate in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces incl form work set in cement mortar CM 1:4 complete all as specified and as directed

M & L for Point wiring with 1.5 Sq mm copper conductor multistranded FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC caping and casing surface type and accessories of suitable size ISI marked and terminal boxes of 1.0 mm thick of suitable size including fixing/grouting sunken/ surface as per site requirement incl provision of modular cover plates for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for

one light/bell point controlled by one way switch

one fan/exhaust fan and wall mounted fan point controlled by one way switch.

One 6 amps socket outlet point controlled by one switch on same board.

One 16 Amp, socket outlet point controlled by one switch and wiring with 2.5 Sqmm PVC insulted, multi-stranded, unsheathed copper conductor FRLS cable on independent board including continuous 2.50 Sqmm FRLS copper conductor, PVC insulated, unsheathed earth wire (Green colour).

S&F factory made sheet metal enclosures for distribution board, double door type made out of M.S sheet, concealed in wall, SPN with 200 Amps rated bus bar, 8 way, 230 volts, dust and vermin proof, complete all as specified.

M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 06 Sqmm and drawing through & including PVC conduit on surface including earth continuity conductor of size 06 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in ccocealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge.

S&F modular switch, one way, 6 Amps, one module complete all as specified.

S&F modular switch, one way, 16 Amps, one module complete all as specified.

S&F modular socket outlet, 6 Amps, 5 pin combined two modules complete all as specified.

S&F modular socket outlet, 16 Amps, 6 pin combined two modules complete all as specified.

S&F White cover plate with frame suitable for 3 module complete all as specified and as directed

S & F modular flush box for mounting of modular cover plate 3 module complete all as specified and as directed

S&F White cover plate with frame suitable for 6 module complete all as specified and as directed

S & F modular flush box for mounting of modular cover plate 6 module complete all as specified and as directed

Supply and fixing 36 Watt LED Luminaire suitable for 600x600mm modular ceiling grid including frame of suitable size of above LED light with high efficiency PMMA diffuser gives soft glare free light with available lumen output from notless than 110 lumens/watt.The 36 W system shall be operating at 220-240v AC supply having internal driver .IP20,surge protection 2KV ,ambient temperature -20 to 45 degree C, frequency 50 to 60 Hz ,The system efficacy must be between80-100 lumen /watt ,with 70% lumen maintenance upto 50000 Br Hrs with uniform visually comfortable light output at 150 degree beam spread , CRI minimum 80. PF should be greater than 0.95 , THD < 10% . Indivisual LED's should not be visible for glare free output ,colour temperature 6500k all as directed. Make :- Philips, Wipro, Jaguar or equivalent

S&F 10 watt surface mounting LED edgelit slim round down lighter made of PDC Al. with high efficient LEDs & glare free opal diffusar, IP 20 including removal old existing unsv one complete all as specified and directed.

S&F LED sleek mirror light fitting 05 watt provided with high output diffuser 2 ft long, suitable for 120 volts to 270 volts of system efficacy not less then 100 lumen/watt, complete with all accessories, pre-wired including lamp and providing flexible copper wire, twin core cable complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

S&F electronic modular fan regulator 230 volts, step type socket type, hum free 120 watt 2 Module.

Supply and fixing fiber body exhaust fan with louvers of size 300 mm sweep, 900 RPM 230 volts single phase AC supply complete with, bolt, nuts and washers, suitably embedded in the wall/prefabricated sheet etc including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan for giving connection complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 Volts complete all as specified and as directed.

S&F MCB SPN upto 32 Amps ,240 Volts complete all as specified and as directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality and EER 3.2.of capacity 2 TR complete all as specified and as directed

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed.

S.RAMACHANDRAN (BID ID -3363961)

N SARAVANAN (BID ID -3362588)

T C KARUNANITHI (BID ID -3361343)

p.chinnasamy (BID ID -3361696)

A.GOVINDARAJ (BID ID -3362494)

Vishnu Infrastructures (BID ID -3364592)

KAARTHIC BUILDERS (BID ID -3362718)

K S MUTHU CONSTRUCTTIONS (BID ID -3363714)