Providing Two Numbers of 250KVA DG Set with Standard Control Panel in the Campus of Arulmigu Meenakshi Sundareswarar Temple at Madurai.

Amount

Supply, Installation, testing commissioning & Handling over of 1No 250KVA conforming to CPCB IV(+) norms and BIS Specfication of diesel generator set 0.8P.F, 3 ph, 415 Volts, 50c/s, 1500 RPM (Kirloskar Green / Cummins ) as detailed below. A. Engine: Water cooled diesel engine suitable for generating application (Kirloskar Green/ Cummins ) developing shaft output of 310 BHP at 1500 RPM under NTP condition as per BSS 5414-ISO 8528. The engine shall comprise the following standard scope of supply. 1) Dry type Air cleaner 2) Expansion bellow 3) Radiator, radiator fan and mounting 4) Air to air charge cooler 5) Exhaust gas turbo charger 6) Lube oil cooler and lube oil filter ( For Full Specification Please see Annexure IV of the Tender Condition )

Supply and installation of Additional length of exhaust piping with suitable MS pipes so as to extend outside the generator room with necessary thermal insulation.

Providing suitable concrete foundation with cement concrete 1:2:4 of height 5 feet with sand cushion all around the foundation and erection of generator set with proper alignment over the existing foundation.

Preparation of Site plan, physical layout electrical schematic diagram (6 Sets) getting drawing approval from CEIG, preparation of completion report rectification report etc. arranging CEIG inspection, paying CEIG inspection fees and obtaining safety certificate from CEIG.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and laying of 3 ½ x 300 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 3 ½ x 300 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3 ½ x 300 sq.mm. PVC LTUG aluminium armoured cable with earth connection

Supply and providing cable end termination of 3-1/2 x 300 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Towards Charges for Transporting and unloading the DG Set at the site

Sub total

ANNAI ELECTRICALS (BID ID -1325828)