PROVN OF CERTAIN BR AND EM WORK SERVICES AT 251 SU PROVN EXTERNAL SERVICES FOR INTEGRATED FIELD SHELTER AT DIFFERENT LOCATIONS AND PROVN OF SHED EQPTS AT TECH GATE AT AF STN AGRA

Amount

Excavating over area n exc 1.50 m depth in soft/loose soil complete all as specified and directed.

Excavating over area exc 1.50 and nexc 3.0 m depth in soft/loose soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation n.exc. 10 sqm on plan and n. exc. 1.5 m depth and getting out in soft/loose soil. complete all as specified and directed.

M&LCement concrete with type D-2 (1:4:8) mix using 40 mm graded stone aggregate in foundations, filling and mass-concrete etc complete all as specified and directed.

M&L for RCC M- 25 design Mix using 20 mm graded aggregate for Slabs supported on walls,beams and columns in floors,roofs, landings, balconies ,canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, and binding including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. .

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surface etc complete all as specified and as directed.

Returning, filling in, (soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material (soil) to a distance exc. 1.5 km but nexc 5 km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for brick work in cement motar 1:4 using fly ash bricks Old size straight or curved on plan exc 6 m mean radius complete all as specified and direted

M&L for 15 mm thick renderirng on fair faces of brick work or concrete surface in cement mortar 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for preparation of newly plastered surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth etc complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of wall and applying Distempering with 1st quality acrylic distemper (ready mixed) in two or more coats having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including plaster of paris putty of 2 mm thickness complete all as specified and as directed.

S & F rolled mild steel framed work as in doors or gates /truss of angle or other section with gusset plate , rails bracess etc, drilling for fixing of steel sheets or other covering including distance pieces work confirming to Fe- 410-W (Gde -E-250) quality A complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws at any height complete all as specified and directed.

M&L Preparation of new iron or steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Surface excavation n exc 30 cm deep and avaraging 15 cm deep and getting out in soft and loose soil complete all as specified and directed.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone etc complete all as specified and directed.

M & L for sand cushioning laid dry to the profile under interlocking block or under floor or in foundatons including watering and consolidation etc complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with Grey cement and pigment complete etc complete all as specified and directed.

M&L cement concrete Type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) in kerb stone ,copings,, apex stones, , anchorage blocks, , etc.(of any section as directed), with plain fair faces, including chamfered weatherings, throating and necessary form work etc complete all as specified and as directed.

M & L for prepararing new concrete surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of priming paint complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of incl brick or concrete surfaces finished fair and even in CM (1:4) mixed with water proofing compound (WPC shall be measured and paid sepeteraly) etc complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed. .

M&L for rendering 15 mm thick on other than fair faces of brick or concrete surfaces finished even and smooth (without using extra cement) in CM (1:4) complete all as specified and directed.

M & L pre cast cement concrete 1:2:4 type B-1 (using 20mm graded agg.) for MH cover slab set in CM 1:6 complete all as specified and directed.

M/L TMT bars 8 mm dia cut to length, bent to shape, required including cranking, bending spirally for hooping for columns, hooking ends binding with MS wire annealed n.less than 0.90 mm dia complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested complete for pipe of 150mm bore complete all as specified and directed.

M&L for 150 mm dia reinforced concrete pipe class NP3 laid and joined complete all as specified directed.

M&L for constn of soakage, well including excavation in ordinary soil, foundation in PCC 1:3:6, type C2 (using 40 mm graded aggregate) wall shall be constructed in solid bricks in CM 1:4 , RCC slab covers shall be constructed as per drgs, filling with brick bats, complete of size 1.2 M dia internal X 1.5 M effective depth complete all specified and directed. and shown on drawings. No TD/217sheet 2/2 dated 25.01.68 (Revised upto 27.06.91)

Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed

M&L for rendering or bedding layer 15mm thick in cement mortar 1:6 on fair faces of concrete surfaces mixed water proofing compound concrete surfaces with WPC, finished even and fair with out using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separetly

M&L for preparation of newly plastered surfaces of wall and finishing with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified.

M&L for preparation of old plastered surfaces of wall and applying two coats of distemper oil emulsion white or tinted over a coat of Wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x450mmx7mm thick on wall/vertical surfaces such as skirting, dados and riser to steps etc laid over and including 15 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.

M&L 100mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floors etc complete all as specified and as directed.

M&L 100mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base of floors etc complete all as specified and as directed.

M&L Cement concrete work in pavement / hard standing of flexural strength 40 Kg per Sqcm in field using 400 kg of cement per cubic metre, thickness of concrete 250 mm or less complete all as specified & directed.

S & F rolled mild steel framed work as in framing for cladding, glazing and the like fixed with cleats and connecting plates etc complete all as specified and as directed. conforming Fe 410 -W (Gde-E- 250) quality-A

Supplying and laying 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over tack coat / sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, etc complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate as in in foundations, filling and mass concrete etc complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying Two coat of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F Pre-painting galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall of any height , fixed with self tapping screws as required comlplete all as specified and directed.

M & L for prepararing old decorated steel surfaces of any description not Exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate in drain, foundation filling and mass concrete complete all as specified and directed.

M&L for Shifting of Ops shelter container with frame including dismounting from present location and mounting on proposed location with the help of suitable crane complete all as directed by Engr-in-Charge.

M&L for mild steel work as in wind ties for roof incl securing bolts, posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 upto any height of bldg etc complete all as specified and directed.

M&L for roof trusses (framed), trussed,purlins, bracing,crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not exc 10 cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of exterior emulsion paint with one coat of primer in normal / camouflage pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. Note:- finishing coat shall be through roller only. Note :- Primer and emulsion to be carried out through air less spray machine (Mechanical means)

M&L for two coats of distemper oil emulsion over newely plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and as directed

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (below or above ground) etc complete all as specified and directed.

M&L for 40 mm thick PCC(1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L for 8-10 mm thick Vitrified ceramic tiles, light shade double charged (square/recangular) area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed

S&F 605mm x 605mm size anodised aluminium snap grid frame work for false celing and 4mm thick non asbestos fibre cement building board of approved make and design fixed or laid/ inserted to aluminium framework with screws as per manufacture's instructions incl GI 6mm dia fully threaded hangar rod complete all as specifie and directed.

Supply, laying, testing GI tubing 20MM bore medium grade fixed to wall, ceiling or laid in floor including required GI fitting complete all as specified and directed .

Supply & fixing gun metal globe or gate valve 20mm bore dia of pipe with iron wheel head, screwed both ends ISI marked for complete all as specified & directed.

M&L for drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20mm complete all as specified and directed.

Supply and lowering submersible pump set of capacity 1.5 HP, single phase,50 Hz, 70 LPM at 57 Mtr Head, delivery size 32mm,stage 13 complete all as specified and directed.

Design, supply, erection, testing and commissioning of outdoor type wall mounted panel box of overall size not less than 500mm width x 500mm Height x 400 mm Depth (With Canopy & Base Channel) MS channel base suitable for 3 phase 4 wire, 415 volts AC supply and the panel box shall be duly fabricated in a approved / certified factory / fabrication house who posseses test certificate from CPRI for similar type of Feeder Pillar and having modern fabrication and testing facility which includes atleast seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032 (SIEMENS GRAY). The panel box shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.15mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having front and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom and 2 Nos Earthing Termination bolts. The panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation etc complete all as specified and directed. The panel board shall comprising the following:- (i) Auto Starter - 01 Nos (ii) Capacitor digital volt meter - 01 Nos (iii) Digital Amp Meter - 01 Nos (iv) Indicator lamp R-Y-B - 01 Nos (v) MCB 32 Amp TPN - 01 Nos

M & L for 2 Nos MS clamp madeout of 40mmx 6 mm thick MS flat iron section for holding of 40 mm dia column pipe complete with suitable size of nut, bolt & washers 02 Nos complete, all as specified and directed

M& L for well cap of 125 mm dia duly made out of 4 mm thick MS plate including making provision for passing GI column pipe of 40 mm dia complete all as specified and directed by Engineer-in-charge.

Supply & lowering in bore well 32mm bore high density polyethlene (CPVC) column pipe socketed type of pressure rating 6Kg/cm2 with & including all necessary fixing/ jointing accessories complete all as specified and directed. Make- Ashirvad/Kishan/Atul

M&L for boring/drilling in any type of strata upto 100 mtr of 125 mm dia by any means including developing bore, flushing upto coming of clean water etc complete all as specified and directed.

Supply & lowering PVC pipe 110 mm dia ISI marked 6 Kg/cm² pressure Plain/slotted complete all as specified and directed.

M&L for pea gravel of suitable size for borewell to be filled around casing pipe of borewell complete all as specified and directed

Supply and laying or fixing or passing in well/ borewell 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size 2.5sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced.

M&L PCC (1:2:4) type B2 (using 40mm graded aggregate) as in surface,chanells and drains complete all as spciified and directed

Supply, laying and testing cable XLPE PVC Insulated , electric power cables (heavy duty) 1100 Volts grade with aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

M&L for laying in trenches burnt brick sub class 'B' for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified and directed.

deva engineers