Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.3 L+₹68,004.30 (1.81%)Rejected-Finance 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹43.4 L+₹5.7 L (15.2%)Rejected-Finance FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹43.8 L+₹6.2 L (16.3%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹44.1 L+₹6.5 L (17.2%)Rejected-Finance 1 OPP NAGAR NIGAM KATNI MAIN ROAD KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/S S.K.Electricals L1 | Neeraj Enterprises L5 | akenterprises L4 | V r traders L2 | The new hut furnitures L3 | ANAND ENTERPRISES L8 | M/S DEVRAJ SINGHAL L7 | Bee Kay Engineers & Contractors L9 | Deepak Electricals L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete of any type description and in any position complete all as specified. | 29 | Cum | 300 ₹8,700 | 1,550 ₹44,950 | 1,000 ₹29,000 | 149 ₹4,321 Lowest | 159 ₹4,611 | 1,700 ₹49,300 | 2,000 ₹58,000 | 1,710 ₹49,590 | 1,650 ₹47,850 |
| 2.00 | M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundation, sub base under tiles etc complete all as specified and directed by Engr-in-charge. | 20 | Cum | 3,100 ₹62,000 Lowest | 5,600 ₹1,12,000 | 5,000 ₹1,00,000 | 3,799 ₹75,980 | 3,999 ₹79,980 | 5,900 ₹1,18,000 | 5,000 ₹1,00,000 | 6,000 ₹1,20,000 | 5,800 ₹1,16,000 |
| 3.00 | M & L for machine pressed coloured rubberised moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 to 60 mm thickness M-35 grey cement and pigment complete all as specified and directed by Engr-in-charge. | 100 | Sqm | 800 ₹80,000 | 775 ₹77,500 | 850 ₹85,000 | 619 ₹61,900 Lowest | 649 ₹64,900 | 800 ₹80,000 | 1,200 ₹1,20,000 | 820 ₹82,000 | 774 ₹77,400 |
| 4.00 | M&L for sand filling under sub base including watering and consolidating as in cushioning bed for interlocking paver block complete all as specified and directed by Engr-in-Charge. | 7.5 | Sqm | 350 ₹2,625 Lowest | 2,000 ₹15,000 | 2,000 ₹15,000 | 499 ₹3,742.5 | 599 ₹4,492.5 | 2,000 ₹15,000 | 1,700 ₹12,750 | 2,010 ₹15,075 | 1,974 ₹14,805 |
| 5.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises all specified. | 440 | Sqm | 25 ₹11,000 | 90 ₹39,600 | 50 ₹22,000 | 9 ₹3,960 Lowest | 12 ₹5,280 | 90 ₹39,600 | 80 ₹35,200 | 92 ₹40,480 | 90 ₹39,600 |
| 6.00 | M & L for 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified. | 50 | Sqm | 1,200 ₹60,000 | 1,100 ₹55,000 | 750 ₹37,500 | 749 ₹37,450 Lowest | 779 ₹38,950 | 1,100 ₹55,000 | 1,000 ₹50,000 | 1,110 ₹55,500 | 1,050 ₹52,500 |
| 7.00 | M & L glazed ceramic colour tile in area size 450mm x300mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. | 50 | Sqm | 1,000 ₹50,000 | 1,550 ₹77,500 | 1,000 ₹50,000 | 829 ₹41,450 Lowest | 859 ₹42,950 | 1,600 ₹80,000 | 1,500 ₹75,000 | 1,620 ₹81,000 | 1,580 ₹79,000 |
| 8.00 | M & L non skid ceramic coloured tiles as in works, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm ( 300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed. | 50 | Sqm | 900 ₹45,000 | 1,350 ₹67,500 | 1,000 ₹50,000 | 649 ₹32,450 Lowest | 659 ₹32,950 | 1,425 ₹71,250 | 1,300 ₹65,000 | 1,445 ₹72,250 | 1,355 ₹67,750 |
| 9.00 | S & F vitrified ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, including 15 mm thick screed in CM 1:6 complete all as specified. | 50 | Sqm | 900 ₹45,000 Lowest | 1,680 ₹84,000 | 1,000 ₹50,000 | 909 ₹45,450 | 919 ₹45,950 | 1,752 ₹87,600 | 1,600 ₹80,000 | 1,762 ₹88,100 | 1,680 ₹84,000 |
| 10.00 | S & F vitrified coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings including 10 mm thick rendering etc complete all as specified. | 10 | Sqm | 1,100 ₹11,000 | 8,000 ₹80,000 | 1,200 ₹12,000 | 909 ₹9,090 Lowest | 919 ₹9,190 | 8,345 ₹83,450 | 1,600 ₹16,000 | 8,435 ₹84,350 | 8,000 ₹80,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Jun 2025, 6:00 pmClosed
GE AF Tughlakabad
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
REPAIRS TO FLOORING PLINTH PROTECTION TILLING PLASTER PLUMBING AND ROOF TREATMENT STRENGTHENING WORKS AND MISC B/R WORK AT VSV TECH AREA AND MES COLONY AT AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD
2025_MES_711608_1
GE/TKD-24/2025-26
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF Tughlakabad
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹0
₹90,000
Yes
14 Oct 2025
31 May 2025
23 Jun 2025
31 May 2025
21 Jun 2025
14 Jun 2025
Amount
Demolition of cement concrete of any type description and in any position complete all as specified.
M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundation, sub base under tiles etc complete all as specified and directed by Engr-in-charge.
M & L for machine pressed coloured rubberised moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 to 60 mm thickness M-35 grey cement and pigment complete all as specified and directed by Engr-in-charge.
M&L for sand filling under sub base including watering and consolidating as in cushioning bed for interlocking paver block complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises all specified.
M & L for 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified.
M & L glazed ceramic colour tile in area size 450mm x300mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M & L non skid ceramic coloured tiles as in works, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm ( 300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.
S & F vitrified ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, including 15 mm thick screed in CM 1:6 complete all as specified.
S & F vitrified coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings including 10 mm thick rendering etc complete all as specified.
M & L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/ rectangular) of size not less than 300mmx300mm as in parking/hardstanding etc including set, jointed in cement slurry and pointed in white or coloured cement to match the colour/shades of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified.
M&L machine cut kota stone slab flooring 20-25 mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete.
M&L Screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes.
M&L machine cut kota stone slabs as in vertical surfaces such as risers of steps 20-25 mm thick over 10 mm thick cement rendering (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges complete.
M&L for 20mm thick Granite of (any type) work (table rubbed and polished) in steps , jambs, pillars window cills ,cooking platforms over cement screed and jointed with grey cement slurry like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 10mm thick screed bed all as specified and directed.
M&L PCC 1:3:6 type C-2, (using 40 mm graded stone aggregates) as in plinth protection; 75 mm thick; finished even and smooth without using extra cement including necessary formwork complete all as specified and directed.
M & L for washed stone grit plaster on exterior walls in two layers, under layer 15 mm thick cement plaster (1:4) (1 cement :4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per Sqm, top layer 15 mm thick cement plaster (1:½:2) (1 white cement : ½ coarse sand :2 stone chipping 8 to 10 mm nominal size) in panels with aluminium beading groove (size of aluminium beading 10 mmx 10 mm) all around as per approved pattern including scrubbing and washing and colour (as per user direction) the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : work can carried out upto 15 mtr height.
M&L for dubbing out average 10mm thick on irregular face of walls, chajjas, facia etc including taking down irregular plaster surfaces complete all as specified.
M&L for 15mm thick rendering in CM (1:4) on concrete or masonry surfaces mixed with water proofing compound @ 3% by weight of cement, surfaces to be finished even & smooth without using extra cement including racking out joints, hacking for key, scrubbing down with water etc before applying rendering complete all as specified. Note - WPC shall be measured and paid separately
M&L Preparing old plaster surface of wall of any description and apply two coats of exterior weatherproof water base emulsion paint (APEX) in white or tinted complete all as specified and as directed.
M&L Preparing plaster surface of wall of any description and apply two coats of exterior weather proof water base emulsion paint (APEX) in white or tinted paint over a coat of primer complete all as specified and as directed. Note:- Quoted rate shall be deemed to be included for work of any height including scaffolding
M&L for rendering 10mm thick in cement mortar (1:6) to brick or concrete wall surfaces finished even & smooth without using extra cement including racking out joints, hacking for key, scrubbing down with water etc before applying rendering complete all as specified.
M&L for preparation of new plastered surfaces of walls applying a coat of putty and applying two coat of oil bound distemper of approved tint, complete all as specified.
M&L for Preparing old surfaces of walls applying two coat of Oil Bound Distemper complete all as specified and directed.
Supply only integral water proofing compound ISI Marked complete all as specified.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm complete all as specified and directed by Engr-in-charge.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm complete all as specified and directed by Engr-in-charge.
Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 15mm complete all as specified and directed by Engr-in-charge.
Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 20mm complete all as specified and directed by Engr-in-charge.
S & F in repairs 20 mm dia galvanized steel tubing, medium grade, with all fitting RM and fixed complete to walls celling or laid in floors complete all as specified and directed by Engr-in-charge.
S & F in repairs 15 mm dia galvanized steel tubing, medium grade, with all fitting RM and fixed complete to walls celling or laid in floors complete all as specified and directed by Engr-in-charge.
S & F in repairs of Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia complete all as specified.
Dismantling of existing water tank (PVC/RCC/AC) exceeding 500 litre but not exceeding 1000 litre capacity and removing from site complete all as specified and as directed. Note:- Dismantled water tank shall become the contractor's property as Schedule of Credit.
S & F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified.
S & F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified.
Demolition of cement concrete is reinforced (reinforcement) cut as required to facilitate demolition) In Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified.
Supply and fixing framed work such as grills, gratings, tank cover, drain covers made of angle, for monkey proofing, channel, bars and sheets etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a one coat of red oxide zinc chrome primer complete all as specified and as directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.
M&L for providing 4mm thick asbestos fibre cement designer building boards including galvanized iron anodized snap grid frame work for false ceiling size of grid 605 x 605mm thickness of section not less than 0.5mm of 3 mm dia GI hanger fixed with steel dash fastener including necessary alternation for fixing electrical fixtures including taking down old false ceiling boards with frame complete all as specified.
S & F in repairs of venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons/loops etc fixed cuttings and alteration if necessary, where ever AC/ coolers exists complete all as specified.
S & F in repairs PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and including PVC framework using 35mm wide sheet fillet all as specified.
S&F in repair for aluminium composite panel of 4.00 mm thickness which consist of 3mm thick thermoplastic cora of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick aluminium foils with outer surface finished with 30 PVDF & inner surface finished with thin coat of polyester paint, cladding panel fixed to aluminium grid of size n exc 2 Sqm and size of section shall be 38 mm x 50 mm x 1.05mm thick aluminium grid fixed to wall by angle iron clamps 25 x 25 x 6mm with spacing not more than 3 mtr c/c colour shade and pattern as approved by GE including all necessary steel scaffolding work including taking down complete all as specified and directed by Engr-in-Charge. Note: work can executed upto 15 m height. Make : Aludecore/ Eurobond/Alstone
S & F in repairs for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of 160 mm dia complete all as specified.
S & F in repairs for PVC (SWR) bend of 160 mm dia complete all as specified.
S & F in repair vitreous china squatting pan “ORISSA PATTERN” size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc and removing old IWC outside MD land complete all as specified
S & F PVC in repairs PVC flushing cistern 10 ltrs capacity, low level, white with inlet, ball valve, float and handle including brackets complete all as specified
S & F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling, waste pipe and including PTMT pillar tap 15mm, waste fitting and union, removing old WHB outside MD land complete all as specified and directed
S & F in repairs, urinal half stall vitreous china coloured supplied with PTMT integrated spreader for even flow of water, installed with concealed 'Z' brackets, including brass chromium plated 32mm bore bottle trap, waste coupling complete all as specified.
S & F in repairs, urinal spreader of CP of any colour for fixing with 15 mm dia pipe complete all as specified.
S & F PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified
S & F in repairs for bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down including fixed in repair all as specified.
S & F in repair for angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed in repair all as specified.
S & F in repairs of PVC waste pipe 32 mm bore with PTMT waste coupling (half or full threaded) Min weight 45 gms complete all as specified.
Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engr-in-Charge.
Demolition of mud in roofs any thickness, including Surface preparation by removal existing roof treatment of tar felt treatment/APP Membrane/PCC/Plaster/ and all foreign material such as grass roots dust etc and removing all debris from MOD land complete all as specified and directed by Engr-in-Charge.
M&L applying water proofing treatment with APP modified polymeric membrane centre core of 100 micron HMHDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm, on newly prepared surface with torch application as per manufacturer instruction complete all as specified and as directed with the following description :- (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm.(b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a IInd course.(c) Laying of APP modified polymeric membrane as a IIIrd course.(d) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a forth course.(e) Finishing of top top surface by two coats of aluminium paint
M&L plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by Engr-in-charge at site.
M&L for 10mm thick plastering in CM (1:3) on concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.Note - WPC shall be measured and paid separately.
Supply only water proofing compound complete all as specified and directed by Engr-in-Charge.
Demolition of brick work build in cement mortar complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class 'B' bricks, straight of curved on plan exceeding 6M mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
Taking down of cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr-in-Charge.
M&L for 10mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces as in ceilings fair and even complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
M&L for two coats of cement based paint over a coat of white wash on new surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge. Note:- Quoted rate shall be deemed to be included for work of any height including scaffolding
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engr-in-Charge.
M&L PCC 1:3:6 type C-2, (using 40 mm graded stone aggregates) as in plinth protection; 75 mm thick; finished even and smooth without using extra cement including necessary formwork and joints to be filled with sealing compound Grade 'A' complete all as specified and directed.
M&L for Plain Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in sub-base or paving etc complete all as specified and directed by Engr-in-charge.
M&L for sand filling under sub base including watering and consolidating as in cushioning bed for interlocking paver block complete all as specified and directed by Engr-in-Charge.
M&L for precast machine pressed concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment complete all as specified and directed by Engr-in-Charge.
M&L making good broken edges of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 15 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC 1:2:4 type B-0, with necessary form work/scaffolding, finished the surface even and smooth without using extra cement complete all as specified.
Taking down rain water pipes of (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store etc complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) rain water pipes of single socketed in any length with rubber ring joints, jointed with solvent fixed to wall with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC 1:2:4, type B0 complete all as specified and directed by Engr-in-Charge.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.
M & L for cutting holes into or through brick wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as required of superficial area N exc 150 Sqcm complete all as specified and as directed.
Dismantling expanded metal of any thickness or mesh, fixed with steel fillets of weight not exc 4 kg per sqm, complete all as specified and directed by Engineer-in-Charge.
S&F welded steel wire fabric and fixed to steel section at any position n.exc 4kg/Sqm complete all as specified and directed by Engr-in-charge.
Dismantling of wrought iron or mild steel of any description not otherwise provided for all as specified and directed by Engr-in-charge.
S&F in repair for storage tank lid/cover of 2mm thick MS sheet having spikes 40mm long, 100mm c/c distance, for protection from monkey, suitable to fitted in 500 ltr/1000 ltr water tank. The lid/cover to be fixed with tank by 4 Nos self driving screws complete all as specified and directed
M & L for preparation of new or previously untreated steel & iron surfaces including one coat of red oxide primer over that applying two coats of synthetic enamel paint of any description over 10cm in width or girth not otherwise described all as specified and directed.
Supply and fixing framed work such as grills, gratings, tank cover, drain covers made of angle, for monkey proofing, channel, bars and sheets etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC (loose concrete) and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and epoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and applying upto 50 mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) using ordinary port land cement of 43 grade over wherever required, complete all as specified and directed by Engineer-in-Charge. Note:-(i)After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with and including 15mm thick cement plaster in 1:4 (iii) Work to be carried out as in patches as directed by Engr-in-charge.(iv) Rate for steel scaffolding as directed to be included in quoted rate. (v) All demolished material removed from MOD land completely.
S&F as in repair 6mm thick solid poly carbonate transparent sheet fixed to metal frame using aluminium beading clips screws etc complete as specified and directed by Engr-in-Charge.Note : Make of poly carbonate sheet shall be approved by GE
M & L for cutting chases n. exc 10 cm girth in brick wall and making good in cement mortar 1:3 for embedding of GI sheet in wall complete as all specified and as directed.
Dismantling of plain or corrugated steel galvalume sheet/valley gutter any gauge, thickness, including Nainital or similar pattern roof coverings including ridges for north light truss complete all as specified and as directed.
M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in ridges, valley gutter, roof covering/cladding to wall, fixed with self tapping screws at any heights complete all as specified and as directed
M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Disconnecting existing tanks size 500 to 1000 lit, setting aside etc. and required reconnecting and re-fixing in position without any leakage as per Engr-in-charge.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm complete all as specified and directed by Engr-in-charge.
V r traders (BID ID -3331105)
The new hut furnitures (BID ID -3331755)
akenterprises (BID ID -3329980)
Neeraj Enterprises (BID ID -3328379)
Deepak Electricals (BID ID -3329039)
M/S DEVRAJ SINGHAL (BID ID -3331638)
ANAND ENTERPRISES (BID ID -3331816)
Bee Kay Engineers & Contractors (BID ID -3331919)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .