Restoration of V.O.C School Building, Puducherry

Amount

Earthwork in excacavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m - disposed earth to be and lift upto 1.5m - disposed earth to be levelled and neatly dresses - all kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Supplying chemical emulsion in sealed containers including delivery as specified- Chlorpyriphos / lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) - tratment of soil under existing flooors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diametre holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor - with Chlorpyriphos / lindane E.C. 20% with 1% concentration -

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) - Treatment of existing masonry using chemical emulsion @ one litre per hole at 300mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand) to the full depth of the hole - with chlorpyriphos / lindane E.C. 20% with 1% concentration

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level - Thermo-Mechanically treated bars (TISCON / VIZAG/ IISCO / SAIL / JSW) Fe - 415 or more

Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating the rate includes cost of anti corrosive coating including cost of powder, sand blasting, cleaning ,induction, heating , depreciation of machinery etc, wastage in cut length of bars, provision of wooden battens between rows of coated bars , cover to work bush pins / bar bending machines etc - for bars of 20mm to 32 mm diametre - conforming to IS 13620 -1993

Providing and placing M30 grade cover block for RCC work all levels

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering , shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability . Note:- Cement content considered in this item is @ 330 kg / cum. Excess or less cement used as per design mix is payable or recoverable separately. - All work upto plinth level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Vengai wood - 30 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Vengai wood

Providing 40 X 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30 x10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing ISI marked IS : 1341 M.S. heavy weight butt hinges with necessary screws etc.complete - 125 X 90 X 4.00 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : - 250x10mm

Providing and fixing of 65mm Godrej Navtal lock of 7 levers with 3 keys etc complete

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single tee with door - 110x110x110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs , screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm

12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:5 (1 cement : 5 fine sand)

6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

Extra for plastering done on moulding cornices or architraves including neat finish to line and level: in two coat

Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade - New (Two or more coats applied @ 1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm)

Painting wood work with deluxe multi surface paint of required shade. Two or more coat applied @0.90 ltr / 10sqm over an under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand and manufacure

Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete - on concretel work

Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge - In lime mortar

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 square centimetres and above

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in - R.S.joists

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm

Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable matrial within 50 metres lead

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing wall black board with cement mortar 1:3 (1 cement : 3 sand) finishing with a floating coat of neat cement and black pigment mixed in the proportion 1:2 (one cement : two black pigment ) and applying one coat of black board paint including 20mm thick cement plaster band 50mm wide in cement mortar 1:3 (1 cement :3 sand)

Providing and injecting approved grout in proportion recommended by the manufacturers into cracks / honey-comb area of concrete / masonry by suitable gun / pump at required pressure including cutting of Nipples after curing etc comlete (The payment shall be made on the basis of actual weight of approved grout injected) - Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete / RCC work

Disposal of building rubbish and unserviceable dismantled materials upto 5Km radius the rate include incidental charges and loading for transportation by mechanical means. Rate approved by SE-I vide Lr.No. 183/ PW/SE-I/AE(P)-II/F.No.309/2018-19/91 dt. 22.01.2019

Brickwork in lime mortar using best quality local lime, with best quality burnt bricks of class designation 35 in 1:2 lime mortar(1 lime :2 sand & well ground in a pan mixer cum grinder with kadukai extract and jaggery solution and cured for 14 days), including the cost of labour, material and overhead charges, complete work (including provision of vent slots for timber beams and rafters where applicable). Appl.No.11/PW/SEI/AE(P)-II/F.No. 221/ 2018-19/534 dt.17-04-2018

Filling in Plinth or trenches,under floors, in areas with Quarry dust including watering, ramming, consolidating and dressing, cost and conveyance of all materials, labour charges, lead, lift etc complete at all levels as directed by the Engineering-in-charge.Non PSR approved by SE-I vide No.396/PW/SEI/ AE(P)-II/ F.No.525/2016-17. dt.28-12-2016

Supplying and fixing of Cast Iron compound wall fencing as per design and drawing, Each bay consists of four horizontal member each of 30 kg weight and horizontal rods of alternate small and big rods of 25mm dia (+ or – 2 mm thickness variation) and 10 nos of small rod and 9 nos of big rod and the centre rod will be drilled into the wall and each bay is supported by compound wall intermediate pillar. The rate includes material, labour for fixing and overhead charges, the work should be done as per direction of Engineer - in - charge-Appl.No.256/PW/SEI/AE(P)-II/F.No. 221/ 2017-18/1268 dt.20-10-2017

Providing and Laying Madras Terrace Roofing ( 15cm thick) with locally available flat bricks of class designation 35 (kindikal & achu kal) in traditional technique with experienced masons in lime mortar,using best lime and sand (1lime:2 sand & well ground in a pan mixer cum grinder with kadukai extract and jaggery solution and cured for 14 days) true to line and level at all heights and location including all scaffolding material,labour and sundries complete work including curing. Appl.No.11/PW/SEI/AE(P)-II/F.No. 221/ 2018-19/534 dt.17-04-2018

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : - 1500x12mm

Providing and fixing MS kodali keel (Hinges)of 300mm height .One end fixed in to the wall with cement concrete 1:2:4 and other end to the door as per drawing given.

Providing and fixing at all level Precast reinforced " Self Compacting Concrete " rafters for retrofitting work of Jacking operation for arches, arch ribs, columns, beams haunches including the cost of centering, shuttering, finishing but excluding the cost of reinforcement with design mix of self compacting concrete as follows - Cement 500kg/cum, sand 700kg/cum, silicafume 75kg/cum, quartz powder 125kg/cum, plasticiser (supaflo PC 766) 6 lit/cum, HBG metal 10mm size @ 690 kg/cum and water 180 lit/cum all as directed by the Engineer-in-charge.

Providing reinforced " Self Compacting Concrete " at all level in beams, suspended floors lintels, bands, plain window sills, staircase at all level excluding the cost of centering, shuttering, finishing and reinforcement with composite design mix as follows - Cement 500kg/cum, sand 700kg /cum, plasticizer 75kg/cum, quartz powder 125kg/cum, plastizer 6 lit/cum, HBG metal 10mm size @ 690 kg/cum and water 180 lit/cum all as directed by the Engineer-in-charge.

Providing and laying pressed clay tiles of size 250x250mm(as per approved pattern 18mm nominal thickness as approved size) on roof finished with composite mix,laid over a bed of 20mm thick composite mix mortar as follows - (Cement (OPC) 4 parts, silicafume 1 part, lime 2 parts) 2 part fine M.Sand and add Airent admixture 100ml mixed with the required quantity of water per 50 kg. of powder.

Providing composite design mix lime concrete terracing on roofs of required thickness laid to fall with 20mm nomional size brick aggregate with design mix as follows - Lime 1 part, Quarry dust 2 part, surkhi 4 parts and 3 kg silicafume for every 50 kg hydrated lime including rounding of junction with parapet wall complete.

Providing and laying composite design mix lime concrete in walls, wall (any thickness) including attached pilasters columns, piers, parapet coping, bed blocks etc upto floor five level excluding the cost of centering, shuttering and finishing composite mix as follows - lime 1 part Quarry dust 2 part, surkhi 4 parts and 3 kg silicafume for every 50 kg hydrated lime

Plastering the walls 35 to 40mm thick at all height using Composite design mix 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder including necessary scaffolding, labour, materials, curing etc., complete work as per specifications as directed by Engineer-in-charge

Plastering in ceiling 15mm thick at all height in composite design mix 1:2 as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) fine M -sand 2 part and airent admixture 100 ml / 50 kg of powder including necessary scaffolding, labour, materials, curing etc., complete work as per specifications as directed by Engineer-in-charge

Plastering the existing Circular Pillar for a height of 5m with 35 to 40mm(nominal) thick in two layers with using Composite design mix 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder. Finishing smooth including top & bottom Cornice works, controlled dismantling the existing loose/ decayed plastering, including necessary scaffolding, labour, materials, curing etc., complete work as per specifications as directed by Engineer-in-charge

Providing and making square shaped horizantal groove (sunk band) on the allround outerwalls in G.Floor above 15cm from floor lvl of size 15mm x 15mm finished with using Composite design mix 1:2 as per architectural drawing as directed by Engineer-in-charge.

Providing, chipping and clearing the plastering surface of existing Compound wall Octagonal Pillar and replastering the same with 35 to 40mm ( nominal ) thick in two layers with using Composite design mix 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder . Plastered with trowell smooth finishing including mouldings and cornice works. Compound wall Octagonal Pillar of 2.10m height and 1.76m over all width. In octagon shape each face having 22cm width . The pillar having top and base with mouldings, cornice etc as per detailed drawing including necessary scaffolding, labour, materials etc., complete work as per specifications-as directed by Engineer-in-charge

Providing,chipping and clearing the plastering surface of existing Compound wall Gate Pillar and replastering the same with 35 to 40mm ( nominal ) thick two layers with using Composite design mix 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder. Plastered with trowell smooth finishing including mouldings and cornice works. Compound wall Gate Pillar of 3.40m height and 4.58m over all width having mouldings,cornice etc as per detailed drawing including necessary scaffolding, labour, materials, curing etc., complete work as per specifications-as directed by Engineer-in-charge

Providing tile brick masonry of 50mm thick with common burnt clay FPS(non modular) tile bricks of class designation 10 in plain arch work lime mortor 1; 2 ( 1lime putty 2 course sand )The rate include for measuring, carring, depositing, mixing, slaking of lime, sieving of sand, running cost for upkeep of mortor mill, fuel cost for running miller and scaffolding etc complete

Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in M25 grade design mix jolly as per given detailed drawing in Parapet wall , windows sills etc. including finishing in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering , shuttering but excluding the cost of reinforcement.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters of outer frame of 30-40mm thick and inner shutter of 25-35mm thick to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

18mm thick and 20mm wide moulded Lime mortar (1:2) band (Door & Window) in two coats under layer 12mm thick with composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder including necessary scaffolding, labour, materials, curing etc., complete work as per specifications as directed by Engineer-in-charge.

Providing and fixing Panelled or panelled and glazed or wooden louvered and glazed shutters for windows an dclerestory windows, including ISI marked M.S.Pressed butt hinge bright finished of required size with necessary screws including panelling and 8mm thick plain glass all complete-Kiln seasoned and chemically treated vengai wood 35mm thick shutters.

Providing and fixing glass strip in joints of terrazo/cement concrete floors. 50mm wide and 4mm thick.

Providing and fixing Arch part of the outer windows in Vengai wood with coloured glass as per detailed drawing.The rate including material, labour, necessary scaffolding etc as directed by engineer incharge.

Repairing ornamental plaster works 35 to 40mm thick to match with the existing design as per detailed drawing. Using composite design mix lime plaster 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of design mix 1:2 as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) fine M -sand 2 part and airent admixture 100 ml / 50 kg of powder including necessary scaffolding, labour, materials, curing etc., complete work as per specifications as directed by Engineer-in-charge for verandah circular pillar capital. (The rate including cost of materials labour, GST and CP etc., complete)

Repairing ornamental plaster works 35 to 40mm thick to match with the existing design as per detailed drawing. Using composite design mix lime plaster 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of design mix 1:2 as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) fine M -sand 2 part and airent admixture 100 ml / 50 kg of powder including necessary scaffolding, labour, materials, curing etc., complete work as per specifications as directed by Engineer-in-charge for verandah circular pillar capital. (The rate including cost of materials labour, GST and CP etc., complete) for verandah circular pillar base. (The rate including cost of materials labour, GST and CP etc .,complete)

Removing the existing wood paint and scrapping the wood surface by using machine and manual with proper tools. To ensure the surface will be smooth and free from deposits, dust etc., complete as directed by Engineer-in-charge.

Wiring or light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - GROUP C (For Light Points Only)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required. (For Light Points Only)

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - Group C (For Light Points Only)

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 1.5 sq.mm + 1 x 1.5 sq.mm earth. (For Fan Points & external light)

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 2.5 sq.mm + 1 x 2.5 sq.mm earth

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 4 sq.mm + 1 x 4 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 10 sq.mm + 1 x 6 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 4 X 4 sq.mm + 2 x 4 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 4 X 10 sq.mm + 2 x 6 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 4 X 16 sq.mm + 2 x 6 sq.mm earth wire

PVC CONDUITS AND ACCESSORIES Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 25mm (For Telephone / Data/ CCTV Conduit)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 32mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required - 25 mm

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box / wooden block including connection etc as required.

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x 75mm)

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 3 module (100mm x 75mm)

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 8 module (125 mm x 125 mm) - (If Required)

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 12 module (125 mm x 125 mm) - (If Required)

Supplying and fixing metal box of following sizes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including painting etc.as required - 200 mm x 150 mm x 75 mm - ( Required for Junction box)

Supplying and fixing metal box of following sizes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including painting etc.as required - 250 mm x 300 mm x 100 mm - ( Required for Junction box)

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 5/6 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 6 pin 15/16 A socket outlet (If Required)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc, as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/6 A modular switch, connections etc, as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlets and 2 nos. 5/6 A modular switches, connection etc.as required.

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc .as

CABLE Supply of 4C x 50 sqmm PVC sheathed armoured aluminium U.G cable- 1.1 KV grade. Make:Finolex/Polycab

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X50 sq.mm (35 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc.as required - above 35 sq.mm and upto 95 sq.mm

CABLE TRAY AND TRENCH Supplying and installing following size of perforated Hot dipped Galvanised iron cable tray (galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I.suspenders including G.I.bolts & nuts, etc .as required - 150 mm width x 50 mm depth x 1.6mm thickness

Supplying and installing following size of perforated Hot dipped Galvanised iron cable tray (galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I.suspenders including G.I.bolts & nuts, etc .as required - 300 mm width x 50 mm depth x

Supplying and installing following size of perforated Hot dipped galvanised iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I.suspenders including G.I. bolts & nuts, etc.as required - 150 mm width x 50 mm depth x 1.6 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I.suspenders including G.I. bolts & nuts, etc.as required - 300 mm width x 50 mm depth x 1.6 mm thickness

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75cm deep) and refilling etc.as required - 100mm Dia (Pipe Size not mentioned in PSR)

Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5m, including getting out the excavated soil, refilling with sand and good soil after laying of cable / pipe etc. in layers of 20cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 meters

EARTHING Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

TELEPHONE Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface / recessed steel / PVC conduit as required - two pair

Supply, installation, testing and commissioning of IPBAX system of 48 lines with required operator console, port, distribution frames etc., The rate shall include all allied and implied items for complete commissioning of the system. The incoming P&T line shall be for 4 nos. Make: NEC / Sintal.

DATA NETWORKING Supply and laying of CAT 6 UTP cable for voice network complete with all accessories, wiring terminations, connected civil works, rough plastering etc. Make: D link

CAMERA Supply and laying of CAT 6 UTP cable for voice network complete with all accessories, wiring terminations, connected civil works, rough plastering etc. Make: D link

SPEAKER Supply & laying of 2 core speaker twin twisted cable of size 70/36mm in PVC conduits including bends, junction boxes with necessary clampings and required accessories.

TELEVISION Supplying and drawing co-axial TV cable RG - 6 grade . 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required

PANEL Supply, installation, testing and commissioning of 415V metering panel board fabricated with 14G CRCA sheet steel, powder coated with siemens gray (RAL7032 IS-5) after seven tank process, complete with aluminium bus bars (the clearence shall not less than 25 mm for phase-phase and 19mm for phase-neutral/earth), 3.15mm sheet steel or 40x40x6mm MS angle for load bearing members, lifting hooks, MS base frame of 75mm height incomers and outgoing switchgear as below. The item including cost of supply and fixing of 3-phase energy meters, necessary sealing arrangements, 25x3mm GI earthing throughout the bottom length, 6 sq.mm FRLS copper wire inter connections for compartment earthing, complete copper control wiring with crimping type ferrules, copper lugs, proper engravation sheet to be fixed on each outgoing etc. Also the cost inclusive of minor civil works and providing necessary, support structure/frames with painting as required for erection. All complete as per specifications, drawing and/or as required by CEA/PED. The contractor shall submit general arrangement & control wiring drawings and get approval from site Engineer/Consultant before commence the fabrication works. Note: panels costing should be as per sld & with respect to PED standards. Metering Panel-1 1 Sets each comprising of: a) 100A TPN Fuse cut outs with neutral link. b) Provision for Three phase Energy meter as per PED requirement. c) 100A FP MCB (C - curve 10KA)

MAIN PANEL Incomer : 100A 4P on-load manual change over switch with control MCB's, MFn meter and phase indications etc. - 1 No. 100A FP MCCB - 1 No Outgoings : a) 63A FP MCB (C - curve 10KA) - 7 Nos

TELEPHONE Supplying and drawing of 20 Pair, FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply and fixing of 20-pair telephone Krone type junction boxe enclosed in MS box with hinged cover with lock & key arrangements, all complete as per specifications, drawings and / or as directed by the Engineer.

ELECTRICAL SERVICE CONNECTION Payment service Charges for obtaining power supply and demand from PED. The scope includes filling application, collectiing documents from client and filling documents as per department requirement check list with getting attestation from notary public, PED development charge, Collecting the DD for Development charges paying to PED, getting supply from PED.

Supply, installation, testing and commissioning of metering per service charge etc. all complete as required by PED.

DISTRIBUTION BOARD Supplying and fixing following way, single pole and neutral, sheet steel, MCB disribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 8 way (4+24), double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB disribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 8 way, double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB disribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 16 way, double door

Supplying and fixing TP sheet steel enclosure on surface / recess along with 16/25/32 A, 415 V "C" curve TP MCB complete with connections, testing and commissioning etc as required

Supplying and fixing DP sheet steel enclosure on surface / recess along with 25 / 32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc.as required

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. - Single Pole

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc as required - 40 A

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc as required - 63 A

Supplying and fixing following rating, double pole, 240 V, Isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required - 40 A

Supplying and fixing following rating, four pole,415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required - 63 A

Supplying and fixing following rating, four pole,415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required - 63 A

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc.as required

LIGHT FITTINGS / FAN / EXHUAST FAN Supplying of 1200mm sweep double ball bearing ceiling fan Make: Almonard/Usha

Stepped type Modular Fan regulator (2 module)

3mm thick mica plate for fan hook box (L.M.R)

Concealed type ceiling fan metal hook. (L.M.R)

Supplying and fixing extra down rod of 10 cm length G.I.pipe, 15 mm dia, heavy gauge including painting etc . As required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Installation testing and commissioning of ceiling fan/wall mounting fan and wiring the down rod of standard length .(upto 30cm) with 14/.86mm Plastic insulated twisted Copper wire including earthing as required:

Supply and Fixting of 20W LED tube light fitting Make: Philips / Bajaj / Benio.

Supplying and fixing brass batten / angle holder including connection etc.as required.

Supplying of 13W / 15W / 18W CFL lamp for Pin type Make: Philips.

Installation, testing and commissioning of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS / CFL /LED lamps per fitting. Complete with all accessories including connections etc as required.

TELEVISION Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - TV antenna socket outlet.

TELEPHONE Supplying and fixing RJ 11 modular type Telephone outlet and modular plate in cadmium / GI plated MS box including making connections etc as required. Make: MK / Crabtree.

DATA NETWORKING & CAMERA Supplying and fixing Data socket outlet modular type and modular plate in cadmium / GI plated MS box including making connections etc as required. Make: MK / Crabtree

Supply, installation, testing and commissioning of 24 port Data switches with rack, the rate shall be inclusive of all required civil works. (Make: Netgear / Digilink)

Installation of wall Mounted network rack - 9U door of glass, complety covered and have security lockes, proper ventilated with one fan one cable manager, power distribution units of 6nos(5A) sockets with surge preotection, mounting accessories and 5A top Ventilation switch.

Supply and laying of HDMI Cables with 25mm pvc conduit with all accessories - 5Mtrs

Supply and fixing of HDMI cable - 3 Mtrs.

Supply and fixing of VGA cable - 3 Mtrs.

Supply and fixing of Wireless Mouse

Supply and fixing of NT USB 2.0 1.8Mtrs.

SPEAKER Supply of 500W Mixer - amplifier, Power supply : AC 240V 50/60HZ/DC-36V Rated power : 500W, Tone controls bass - +/- 10dB at 100HZ. Treble - +/- 10dB at 10KHZ, Input wire : 6 x Mic 0.7mV/600 ohms bal TRS. 2-Aux 100mV/10Kohms, RCA Pair, 1xLine 1V/10Kohms, bal TRS.

Supply of Cordless microphone Hand held. Receiver: Single channel Non-Diversity. Frequency Response: 50Hz to 15KHz, Polar Pattern : Cardioid, Output: Unbalance 1/4" jack Power req: Mic 9V Alkaline Battery. Receiver: 240V AC 50HZ for AC adaptor supplied with the set. Make: Studiomaster. Model: ER11/EM11 (Handheld).

LIGHT FIXTURES Fixing Step type socket Fan Regulator on the existing switch box/cover including connections etc. as required.

Supplying and fixing of 230V, 1 x 35W LED Wall bracket mounted type light fitting with suitable 35W LED lamp and necessary fixing accessories as required. Make: Philips/Bajaj

DATA NETWORKING & CAMERA Supply of wall Mounted network rack - 9U door of glass, completely covered and have security lockers, proper ventilated with one fan one cable manager, power distribution units of 6nos (5A) sockets with surge protection, mounting accessories and 5A top Ventilation switch.

Supplying and installing Wall or ceiling mounted indoor type Fixed Dome IP Camera with 1/3” 2MP PS CMOS Image Sensor 2MP@25/30fps, IR Range of 20 Mtrs,. The items inclluding necessary fixing accessories.

Supply, fixing and termination of high quality rack mounted type patch panel with one number of 16 port POE network switch, fixing frames, links and interconnections, necessary accessories etc., all complete as per specifications, drawings and / or as directed by the Engineer.

Supplying and installing of 32 Channel Network Video Recorder with Max 320Mbps incoming bandwidth Smart H.265+/H.265/ Smart H.264+/H.264/ MJPEG Up to 12MP resolution preview and playback Support 8 SATA HDDs up to 10TB Each, 4 USB (2 USB3.0, 2USB2.0) 2 HDMI / 2VGA simultaneous video output Support Multi-brand network cameras Support RAID 0/1/5/10 Mobile Software: iCMOB, gCMOB CMS Software: KVMS Pro. The items including supply of 4TB hard disk, connectors, pins and providing complete configuration etc.

Supplying and installing of Power Supply Unit along with necessary Battery backup, suitable for 1 nos. 32 channel network video recorder system.

Supplying and installing of 43" LED colour monitor.

SPEAKER Supplying and installing of 10 Watts, Wall/ceiling mounted type high quality metallic grill type 100V line speaker with built-in line matching transformer and necessary mounting boxes and fixing accessories.

Supplying and installing of 230V, CD/MP3/DVD Player with necessary power chord.

UPS Supply and erection of 3 Phase, 415 V, 10kVA 3P -in 1P out online UPS with suitable BCB (battery circuit breaker), filters, 16 nos. 12V 42Ah SMF batteries with 30minutes backup with necessary fixing accessories etc. Make: Numeric / Consul / Luminous Battery make: Exide/Quanta

MAILAVELU

G.D.builders

M/s. Murali and Bros

S SARAVANAN

JAHIR HUSSAIN

Jenomaranbuilders(p)Ltd