Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC | L1 | Accepted-AOC Found lowest one bidder | |
| 2 | L2₹10.4 L+₹1.5 L (16.3%)Rejected-AOC | L2 | Rejected-AOC Quoted high rate as compared to L1 |
Tender Value
₹10.1 L
Closing Date
29 Aug 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
rural engineering wing leh
Construction of BDC office at Chuchot Block part II
2022_RDD_7358_6
NIT NO 23 - UTL - REWL OF 2022-23
Open Tender
Civil Works - Others
Item Rate
60 days
Leh
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
Payable To Executive Engineer
Exempted
14 Sept 2022
20 Aug 2022
31 Aug 2022
20 Aug 2022
29 Aug 2022
20 Aug 2022
Amount
Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (Not exceeding1.5 mtr in width) and for shafts, wells, cesspits and thelike not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All Kinds of soil.
Dry random rubble masonry with hard stone in foundation and plinth: Using nallah stone without bond stone
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.
Centring and shuttering including strutting, propping etc. and removal of form for Slab: suspended floors, roofs, landings, balconies and access platform
Centring and shuttering including strutting, propping etc. and removal of form for Edge wall below 20 cm wide
Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excludingpanelling which will be paid for separately,al! completeas per direction of engineer- in charge. Second kail wood
Providing and fixing glazed shutters for doors, windowsand clerestory windows using 1 Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt· hinges bright finished of required size with necessary screws.of 30mm thick using second class Kail wood
French spirit polishing with Two or more coats on new works including a coat of wood filler.
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.
Providing and laying of ready made flooring 8mm thick Action Tesa AC4 complete job.
Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber Ineoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing I panelling, C.P.brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately. For fixed portion . Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,minimum anodic coating of grade AC 15)
Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standardtubular sections/appropriate Z. sections and othersections of approved make conforming to IS : 733 and IS:1285, fixed with dash fastener of required dia. and sizeincluding necessary filling up of gaps at junctions i.e, attop, bottom and sides with required EPDM rubber Ineoprene .. gasket felt etc. Aluminium sections shall besmooth, rust free,straight,beading for glazing I panelling, C.P.brass I stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paidfor separately.)For shutters of doors, windows & ventilatorsincluding providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15).
Providing and fixing 12mm thick prelaminated particleboardflat pressed three layer or graded wood particleboard (conforming to IS: 12823 Grade-l type-11) in panellingfixed in aluminium doors, windows shutters and partitionframes with C. P. brass I stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. .
Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubberI neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge. (Costof aluminium snap beading shall be paid in basic item.)With float glass panes of 5.50 mm thickness(weight not less than 13.50 kg I sqm) .
Providing and fixing aluminium round shape handle ofouter dia 1 OOmm with SS screws etc. Complete as per direction of Engineer-in-charge Powder coated minimumthickness 50 each 74.65 micron aluminium
Providing anf fixing of tower bolt barrel type aluminium ISI marked
Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by themanufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete
Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing white vitreous china water closetsquatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm
Providing and fixing P.V.C low level flushing cistern withmanually controlled device (handle lever) conforming toIS: 7231, with all fittings and fixtures complete: 10 litre capacity –White
Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers.
Providing and fixing of Kitchen sink without drain board size 470x420mm bowl depth 178mm.
Granite stone Table rubbed polished stone 16 mm thick (75x50 cm)
Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape(1500x450) mm.
Providing and fixing Brass toilet paper holder including the cost of wooden PVC etc.
Providing and fixing brass bib cock of approved quality. 15mm nominal bore.
Providing and fixing flow trap of PVC .
Providing and fixing C.P Brass close hole basin mixer piller tape of approved quality and make 15mm nominal bore of Standard back type
Providing and fixing C.P Brass angle valve for basin, mixer and geyser.
Providing and fixing soil, waste and vent pipe 100mm dia PVC.
Providing and fixing soil, waste and vent pipes 75mm dia PVC.
Providing and fixing of plain bends of required degree. 100mm dia PVC
Providing and fixing of plain bends of required degree.75mm dia PVC
Providing and fixing of PPR pipe complete with PPR fitting and damps including cutting and making good the walls etc internal complete.15mm dia pipe. .
Providing and fixing of PPR pipe complete with PPR fitting and damps including cutting and making good the walls etc internal complete.20mm dia pipe.
Providing and fixing C.P Jalli
Providing and placing on terrace (at all floor level) polyethylene water storage tank ISI:12701 marked indicating the BIS License NO. with cover and Suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, Star, Lotus or Equivalent having valid ISI License)
Providing and fixing gun metal gate valve with C.l. wheel ofapproved quality (screwed end) 25 mm nominal bore
Providing and fixing gun metal gate valve with C.l. wheel ofapproved quality (screwed end) 32 mm nominal bore
Providing and fixing connection pipe of approved brand
Providing and fixing PTMT Waste Coupling for wash basinand sink, of approved quality and colour Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour
Providing and fixing of tee bends .
Providing and fixing of wall mixer .
Providing and fixing of 12mm thick plyboard with 4'' wide tounged and groove placing in geometrical design including French polishing
Providing and fixing of 2HP Submersible pump with 5KV stabilizer and nessary items , starter,wiring,etc complete job.
Carriage of sand and coarse agg. avg. Lead of 15 Km by MT
Carriage of cement and Steel avg. Lead of 20 Km by MT
M/S MOHSIN ALI GOVT CONTRACTOR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .