PROVN OF CYCLE SHED AT CHILDREN SCHOOL (SR WING) KANPUR, PROVN OF TOILET BLOCK OF TRG AREA OF 46 COY ASC (SUP) TYPE A AND PROVN OF GUARD ROOM (02 HAV AND 06 OR) AT JOGINDER DWAR UNDER GE (I) KANPUR

PROVN OF CYCLE SHED AT CHILDREN SCHOOL (SR WING) KANPUR UNDER GE (I) KANPUR (ITEM NOS 02 TO 10)

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in post holes(or similar holes) each n.exc 0.5 Cum getting out in soft/loose soil, returning, filling, in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50 Mtr and making good surfaces complete all as specified and directed.

M&L for P:C:C 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete of post hole (incl caps and bases) complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment and Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, plates etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed.

M&L for framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, cooler stands etc conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide & over 10cm width or girth complete all as specified and directed.

PROVN OF TOILET BLOCK OF TRG AREA OF 46 COY ASC (SUP) TYPE ‘A’ UNDER GE (I) KANPUR (ITEM NOS 12 TO 123)

Surface excavation in soft / loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc and getting out in any type of soil complete all as specified and directed.

M&L Plain Cement Concrete type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Formwork to sides of column footing/plinth beam etc, rough finished surfaces of concrete flat complete all as specified and directed.

Formwork to sides of columns, rough finished surfaces of concrete square or rectangular complete all as specified and directed.

Formwork to sides of beam/lintel band and similar structure for flat rough finished surfaces complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of slabs of floor,roofs, cill and similar work etc, and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L RCC M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; base for columns, etc.; basement slabs, unde-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix as in coloums, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 design mix as in beams, lintel band and gable beams complete all as specified and directed.

M&L RCC M-25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for TMT steel bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed.

M&L for TMT steel bars 8 mm dia and above upto and including 10mm dia as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed.

All as per item No 25 above but above 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M &L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius in half brick thick built in CM 1:4 complete all as specified and directed

M&L Damp proof course in cement concrete 1:2:4 type B-0, 40 mm thick including necessary form work with WPC as per manufacturer instruction by weight of cement complete all as specified and directed. Note: WPC will not be paid extra.

M&L for providing plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating,including necessary formwork complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in floor to receive tiles complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neat cement slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C1(using 20 mm graded stone aggregate) as in plinth protection and paving laid in alternate bays finished finish even and smooth wihtout using extra cement complete all as specified and directed

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall even and smooth complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions, surfaces finished even and smooth complete all as specified and directed. Note:- WPC measured and paid separately.

M&L 15mm thick rendering in cement mortar 1:4 on top of roof slab surfaces in green stage, mixed with water proofing compound as per manufacturer's instructions, surfaces finished even and smooth complete all as specified and directed. Note:- WPC measured and paid separately.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall finished even and smooth complete all as specified and directed.

M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash as on wall surfaces complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash as in ceiling surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.

M&L water proofing treatment to roof slab with APP modified polymeric membrane thickness not less than 3 mm plain membrane (weight of membrane not less than 3.50 Kg + 5% per Sqm) and weight of centre core polyster mat shall be 160 gram + 15% per Sqm and lower side finished with 10 to 15 micron thermo fusible polyethylene complete all as specified and directed by Engineer-in-Charge with following courses of descriptions below (a) The surface of roof, parapet and gutters and drains mouth etc over which waterproofing treatment is to be applied shall be thoroughly cleaned of all foreign matter, moss dust etc by wire-brushing and dusting. For cast iron/PVC drains outlets a grove shall be cut around to tuck in the treatment. Concrete angles-fillets provided at junctions between roofs and verticals faces of walls (parapet and other walls) around obstacles such as pipe, chimney stacks etc and other similar situation to ease up about corners. (b) On the prepared surface one coat of Solvent based bituminous primer shall be applied @ 0.35 to 0.50 Kg/sqm till the surface is properly impregnated. The time delay of laying of membrane after application of primer shall be as per manufacturer instructions. (c) Laying of polymeric waterproofing membrane and bonded completely to the substrate & the overlaps are then sealed /fused by flame torch as per manufacturer instructions. (d) The overlaps shall be of minimum 4 Inch (100 mm) side lap and 150mm at end, sealed by the flame-torch. (e) Applying two coats of aluminium paint over a coat of primer on APP Membrane for non accessible terrace only (M&L for two coats of aluminium paint over a coat of primer shall be measured and paid seperately under relevant item).

M&L for preparation of new surfaces and applying two coats of aluminium paint over a coat of aluminium primer on membrane, over 10cm in width or girth complete all as specified and directed.

S&F factory made steel tubular ventilator with side hung shutter including hinges steel peg stay, complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed. Note: 4mm frosted / pin headed sheet glass panes shall be deemed to be included in this item.

M&L solid PVC frame (single rebated) of size 60 mmx 30 mm made out of solid pvc foam with homogenous fine cellular structure having smmoth outer integral skin with suitable metal stifner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.

S&F PVC handle 150mm size complete all as specified and directed.

S&F PVC but hinges 100mm size complete all as specified and directed.

S&F PVC tower bolt 150mm size complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

S&F Vitreous China Squatting pan, Orrisa pattern size 580x440 mm (ISI marked) white with integral foot rest with suitable CP Trap including necessary concrete work and finished to match the surface complete all as specified and directed.

S&F vitreous china pedestal pattern, white with including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, with and including PVC valveless, syphonic action type flushing cistern, low level, white wit inlet,m ball valve, float and handle in cluding brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern, seat cover and jet spray etc. including making good to floor complete all as specified and directed.

S&F vitreous china urinal bowl type flat back size (465 x 355 x 265) mm white grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in CM (1:2) including 60mm brass screws complete all as specified and directed.

S&F vitreous china WHB white flate back size 550x400mm, angle iron brackets complete all as specified and directed.

S&F 600 mm x 450 mm bevelled edge mirror, mounted on 6 mm thick plywood and fitted to wooden plugs with CP brass screws and cup screws complete all as specified and directed.

S&F 10 litre PVC valveless, syphonic action type flushing cistern low level with inlet valve, float and handle including brackets and PVC outlet suitable for IWC/EWC complete all as specified and directed.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 15mm bore CP fancy type short body bib tap with capstan head complete all as specified including flange complete all as specified and directed.

S&F angular stop cock 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed.

S&F pillar taps fency type (ISI marked) cast copper alloy cp with capstan head, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nut screwed for iron pipe of 15mm bore all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges incl brackets complete all as specified and directed.

S&F stainless steel gratings suitable for 75 mm floor trap complete all as specified and as direcred.

S&F PVC waste pipe 32/40mm dia suitable for WHB/Urinal/Sink etc complete all as specified and directed.

S&F PVC connection 15 x 450mm complete all as specified and directed.

S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.

S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified and directed.

S&F rotational moulded polythylene water storage tanks 1000 lit capacity (cylinrical vertical with colsed top) hoisted with 20 mm bore ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe fixed in postion complete all as specified and directed.

S&F gun metal globe or gate valves with iron wheel head, screwed boh ends for iron pipe and fixed of 20mm dia on stone, concrete, block, slab or wall in repairs of ISI marked complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete all as specified and directed.

All as per item No 74 above but 75mm bore complete all as specified and directed.

S&F 110mm PVC (SWR) (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door.

All as per item No 76 above but 75mm bore complete all as specified and directed.

S&F 110mm PVC (SWR) reducer complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F PVC (SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) gully trap 150 x 100 quare or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) cowl 75/100mm dia as required complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and directed.

S&F PVC(SWR) Coupler 75/110 mm dia complete all as specified and directed.

S&F, 110mm dia PVC rain water pipe single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified and directed.

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L hardcore of broken stone or boulder of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to true surface complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base all as specified and directed.

M&L of Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L of Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Providing precast ce- ment concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.

Excavaton in trenches, not exc. 1.5 metere wide andnot exc 1.5 meter in depth, in soft/loose soil, for foundations, laying pipes, drains or manholes 10 sqm on plan and getting out including trimming sides and forming bottom surfaces to required levels/slopes etc, complete all as specified and directed.

M&L for plain cement concrete (1:4:8) Type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate, as in coping, bed plates including necessary form work and finishing the exposed surfaces of concrete as in clause 4.11.16 or SSR 1991 (Part-I) and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick/concrete surface finished even and smooth w/o using extra cement complete all as specified and directed. (with water proofing compund) (Supply only of WPC shall be paid separately)

Material & Labour pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabs, set in cement mortar 1:4 including necessary form work complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately under appropriate items of the shcedule)

Material & labour for mild steel TMT bars 10 mm dia & over cut to length, bent to shape required, including crancking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for plan cement concrete 1:3:6 type C-2 using 40 nmm graded stone aggregate as in concrete bed to reinforced concrete pipes pipes of 150 mm bore laid to falls, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. Note :- Reinforced concrete pipes shall be measured and paid separately.

M&L Reinforced concrete pipes, 150 mm bore (internal dia) class NP3, laid and jointed complete with collars laid in trenches on concrete bed to required slope, jointed and tested complete all as specified and directed. Note :- Excavation/Earth work and concrete bed shall be measured and paid for separately under appropriate items of the Schedule)

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cms thick complete all as specified and directed.

Removing susrplus excavated soil to a distance n.exc 50 mtr and depositing where directed a a level n.exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply only integral water proofing compound, ISI marked as approved complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends etc complete all as specified and directed.

M&L for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Brick work walls and Roof Slab in M-25 including beams etc with Vent shaft , manhole openings with cover connection etc complete all as specified and directed.

M&L for soakage well (3.0 M dia x 4.5 M effective depth) excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete made of Brick masonary in CM, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete all as specified and directed.

Supply and fix in replcement MCB DB double door type single phase with common eath and neutral bus and 200 amps copper bus bars 240 volts, 04 way complete all as specified and directed.

S&F MCB SP 6-32 Amps, 10 KA, 'C' series complete all as specified and directed.

S&F MCB SPN 40 Amps, 10 KA, 'C' Series complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLSH grade ISI marked with multistranded copper conductor drawn through and including concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dully for following complete all as specified and directed:- One light/fan point controlled by one 05 Amps switch.

Supply and fixing in repair surface and wall mounted LED Tube light & fitting 20 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm nominal cross section two core, laying in trenches/wall complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

S& F HDPE double wall corrugated(DWC) electric pipes of size 40 mm dia of 6 mtr length each, manufactured using HDPE polymer having a smooth/plain internal surface & corrugated external surface having with greater stifness withstand soil movement and take higher loads (static and dynamic ) including connecting rings made of HDPE DWC suitable for 40 mm pipes, to pass through LT cable complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point Solids complete all as specified and directed.

Supply and laying in trenches/on the wall pipes galvanized iron pipes, of “medium class” complete including fittings of size 20 mm dia complete all as specified and directed.

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point Solids complete all as specified and directed.

PROVN OF GUARD ROOM (02 HAV AND 06 OR) AT JOGINDER DWAR UNDER GE (I) KANPUR (ITEM NOS 124 TO 247)

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft / loose soil complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for fdn, etc or for shafts, wells, cesspits, manholes, pierholes etc and n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard / dense soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) in foundation, filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M &L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius in half brick thick built in CM 1:4 complete all as specified and directed.

M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

All as per item No 132 above but 8mm dia complete all as specified and directed.

All as per item No 132 above but 8 to 10mm dia as in stirrups complete all as specified and directed.

M&L for formwork to rough finished flat surfaces of footing and plinth beams complete all as specified and directed.

M&L for formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and directed.

M&L for formwork to chajja, roof beams, lintels and soffits of roof projections etc and similar items including edges complete all as specified and directed.

M&L for formwork to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs and landing and similar works complete all as specified and directed.

M&L for formwork to rough finished flat surfaces of edges of window cills, concrete railings, and similar work n.exc 20 cm wide complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for chajjas complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for roof beams and lintels complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for slabs supported on walls, landings and like etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 over brick / conc wall surfaces and sagol finished for internal wall surfaces complete all as specified and directed.

All as per item No 145 above but in CM 1:4 for external wall surfaces and sponge finished complete all as specified and directed.

All as per item No 145 above but 10mm thick in CM 1:3 as in ceiling finished even and smooth using extra cement complete all as specified and directed.

Supply only liquid type water proofing compound complete all as specified and directed.

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C1 (using 20mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete all as specified and directed.

S&F 30mm thick flush shutters, solid core onstruction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 1st class soft wood complete all as specified and directed.

M&L preparation of new wooden surface of any description and applying two coats of synthetic enamel paint over one coat of pink primer, over 10cm width or girth complete all as specified and directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections complete all as specified and directed. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections and rubber beading etc complete all as specified and directed. (a) SP - 20048 (b) Glazing clips - 19352.

S&F MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank, and similar work conformed to Fe-410 or 310-0 complete all as specified and directed.

S&F stainless steel wire cloth 0.71mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11. The width of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2004 Part 11 complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.

All as per item No 161 above but 150mm long complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size complete all as specified and directed.

S&F butt hinges 100mm, medium weight complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured designer glazed ceramic tiles of size 300x600x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 20 to 25mm thick machine cut Kota stone (550 x 550 mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 168 above but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in floor subbase complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregates in kerb stone / PCC kerb includig sharp or chamfered angles as directed and set in CM 1:4 complete all as specified and directed.

M&L for 50mm thick cement concrete type C2 (1:3:6) (using 40mm graded stone aggregate) as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for for preparation newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of OBD of approved tint and pattern over one coatof primer over a coat of 2mm thick wall care putty on wall complete all as specified and directed

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash (for chajjas) complete all as specified and directed.

M& L for preparation of newly plastered surfaces of wall and applying two coat of acrylic emulsion over a coat of alkali resistant primer of same make over one coat of white wash for external walls complete all as specified and directed. Note : Arcylic emulsion of BERGER / ASIAN PAINT/DULUX etc with minimum warranty period of 05 years to be used with primer of the same make

S&F rotional molded polythylene water storage tank 500 ltr capacity (Cylinderical vertical with closed top) with tank nipple 20mm bore hoisted and fixed in position complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore steel tubing fixed on wall / floor including all fittings and necessary cutting of chases for concealed portion etc complete all as specified and directed.

S&F 20mm bore steel tubing fixed on wall / floor including all fittings complete all as specified and directed.

S&F 15mm bore chromium plated bib cock fancy type complete all as specified and directed.

S&F 15mm bore chromium plated angle cock fancy type complete all as specified and directed.

S&F 15mm bore chromium plated concealed cock fancy type complete all as specified and directed.

S&F 15mm bore chromium plated pillar cock fancy type complete all as specified and directed.

S&F brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, with PVC valveless, syphonic action type flushing cistern, low level, white wit inlet,m ball valve, float and handle in cluding brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern etc. including making good to floor, complete all as specified and directed.

S&F vitreous china flat back type wash basin, white of size 550 x 400 mm including brackets complete all as specified and directed.

S/F brass chromium plated waste coupling 32mm dia complete all as specified and directed.

S&F PVC connection 15 x 450mm complete all as specified and directed.

S/F PVC waste pipe for 32 mm dia complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete all as specified and directed.

All as per item No 193 above but 75mm bore complete all as specified and directed.

S&F 110mm PVC (SWR) (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

All as per item No 195 above but 75mm bore complete all as specified and directed.

S&F 110mm PVC (SWR) reducer complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F PVC (SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) gully trap 150 x 100 quare or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) cowl 75/100mm dia as required complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and directed.

S&F PVC(SWR) Coupler 75/110 mm dia complete all as specified and directed.

S&F, 110mm dia PVC rain water pipe single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified and directed.

Point wiring for one light/fan/bell/exhaust fan point/ controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 205 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl PVC conduit complete all as specified and directed.

All as per item No 205 above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

All as per item No 205 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.

Switch piano flush button single pole one way 15/16 amps 230 Volts complete all as specified and directed.

M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts complete all as specified and directed.

M&L for switch piano flush button single pole one way 5/6 amps 240 volts complete all as specified and directed.

M&L for socket 5 amps 3 pin flush type, 230 volts complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC),White colour ,including ceiling rose to connector of ceiling fan 0.75 sqmm twin core copper conductor complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling complete all as specified and directed.

S&F LED in wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W, including Bracket, clamp,nut bolt , washer, grouting with wall & Suitable for connection twin core 1.5 sqmm aluminium conductor ceiling rose to wall security light complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexibl copper conductor cable of suitable size complete all as specified & directed.

Supply and fix sheet metal enclosure MCB distribution board, 8 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified & directed.

M&L for MCB single pole 240 volts, B Curve& 6 to 32 amps, with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply & lay in trenches/wall pipe galvanized , ''Medium class'' including fittings 20 mm dia, such as T, Elbo, Reducer etc, complete all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m indepth; for foundation, etc. orfor shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section two core, complete all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m indepth; for foundation, etc. orfor shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Supply and fixing of HDPE double wall corrugated (DWC) electric pipes of size 40 mm dia of 6 mtrs length each, manufactured using HDPE polymer having a smooth/plain internal surface & currugated external surface having with greater stiffness withstand soil movement & take higher loads (static & dynamic) incuding connecting rings made of HDPE DWC suitable for 40 mm pipes, to pass through LT cable complete all as specified and directed.

Supply & Lay in trenches/wall pipe galvanized, light grade including fittings 25 mm dia, such as T, elbo, Reducer etc, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting complete all as specified and directed.

Excavaton in trenches, not exc. 1.5 metere wide andnot exc 1.5 meter in depth, in soft/loose soil, for foundations, laying pipes, drains or manholes 10 sqm on plan and getting out including trimming sides and forming bottom surfaces to required levels/slopes etc, complete all as specified and directed.

M&L for plain cement concrete (1:4:8) Type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate, as in coping, bed plates including necessary form work and finishing the exposed surfaces of concrete as in clause 4.11.16 or SSR 1991 (Part-I) and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick/concrete surface finished even and smooth w/o using extra cement, complete all as specified and directed. (with water proofing compund) (Supply only of WPC shall be paid separately)

Material & Labour pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabs, set in cement mortar 1:4 including necessary form work complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately under appropriate items of the shcedule)

Material & labour for mild steel TMT bars 10 mm dia & over cut to length, bent to shape required, including crancking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for plan cement concrete 1:3:6 type C-2 using 40 nmm graded stone aggregate as in concrete bed to reinforced concrete pipes pipes of 150 mm bore laid to falls, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. Note :- Reinforced concrete pipes shall be measured and paid separately.

M&L Reinforced concrete pipes, 150 mm bore (internal dia) class NP3, laid and jointed complete with collars laid in trenches on concrete bed to required slope, jointed and tested complete all as specified and directed. Note :- Excavation/Earth work and concrete bed shall be measured and paid for separately under appropriate items of the Schedule)

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cms thick complete all as specified and directed.

Removing susrplus excavated soil to a distance n.exc 50 mtr and depositing where directed a a level n.exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply only integral water proofing compound, ISI marked as approved complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends etc complete all as specified and directed.

M&L for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Brick work walls and Roof Slab in M-25 including beams etc with Vent shaft , manhole openings with cover connection etc complete all as specified and directed.

M&L for soakage well (3.0 M dia x 4.5 M effective depth) excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete made of Brick masonary in CM, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed.