PROVN OF PATHWAY FOR HQ SWC AND PROVN OF PARKING SHED FOR JCOs CLUB ALONGWITH CERTAIN MINOR WORKS IN ZONE-I AT JAIPUR MIL STN

Amount

B/R Portion Excavation in trenches n.exc 1.5 mt wide and n.exc 1.5 m in depth, for foundation etc or for shafts, wells, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Soft/loose soil complete all as specified and directed.

,--ditto--- all as per item No. 01 above but for each additional 1.5m or part thereof in depth beyond the first 1.5 m and getting out in Soft/loose soil as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks (ols size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 complete all as specified and directed

M & L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and directed

M & L for RCC(nominal mix) 1:1.5:3 (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed Note: Reinforcement shall be measured and paid seperately.

M & L for RCC (nominal mix) 1:1.5:3 (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed Note : Reinforcement shall be measured and paid seperately.

M&L for providing plain cement concrete 1:2:4, type B0 (using 12.5mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands , plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like includingweathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M & L for RCC(nominal mix), 1:1.5:3 (using 20mm graded aggregate) as in Chajjas complete all as specified and as directed. Note: Reinforcement shall be measured and paid seperately.

M & L formwork to sides and soffits of floor or beam, beam haunchings, grider, bressumber, lintels, cantilever, shelves including supports, over hang etc also splay between floor and beams to rough finish surface of concrete flat complete all as specified and directed by Engineer-in-Charge.

M&L for formwork to sides and soffits of suspended slabs such as roof slab, floor slabs landing horizontal or slopping and similar works thikness n.exc 200mm including neccesarry sufficient supports for flat and rough finished surfaces of concrete etc complete all as specified and directed by Engineer-in-Charge.

M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified and as directed.

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

,---ditto--- all as per item No 13 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster on fair faces of brick or concrete surfaces in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick cement plaster on fair faces of brick or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 5 mm thick cement plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over and incl a coat of primer over and incl a coat of 3mm thick wall care putty to make smooth the undulated surfaces including rubbing with suitable sand paper complete all as specified and directed.

M & L for preparing new plastered surfaces and applying three coats of white wash on ceiling surface complete all as specified and directed

M&L for preparation of new plaster surafce and applying two coat of cement base paint over and incl a coat of primer complete all as specified and directed

M&L preparation of new steel or iron surface of any description n. exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

M&L Non- skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L glazed coloured ceramic tiles 300x450x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

S & F for Solid wood grain printed PVC sheet door frame of size 50mm x 95mm made by joining 3nos. Heat bent PVC Sheet 'C' Channel of 5mm thickness of sizes 35mm x 30mm x 25mm & 40mm x 35mm x40mm & 25mm x 30mm x 35mm using solvent cement. The two side `C' Channel shall be reinforced with M.S. tube of size 19mm x 19mm. All the three `C' channel Shall be fixed to flat base of 5mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and joined by inserting 4nos. 150mm long brackets of 15x15mm M.S. Square tube inside the 19mm x 19mm square tubes & remain each of then with four screws as indicated in the drawing complete all as specified & directed.

S&F for 35 mm thick Factory made solid EPS core PVC Moulded Door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design, consisting of frame made out of MS tube 20 mm x 40 mm. The core panel shall consist of 25 mm thick high density EPS routed with design, sandwitched in between front side moulded prelam 2 mm thick Moulded PVC sheet on one face and 2 mm PVC sheet on other side. The shutter on all edges to be sealed with lipping of 10 mm (5mm x 2) thick x 25 mm wide PVC sheet on other side & 60 mm wide PVC sheet for lock lock rail side . the lipping shall be bonded to the 2 mm moulded / plain PVC sheet with solvant cement asas specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2010 (Part-II) and Particular specification & as directed by Engineer-in-charge.Note :- (i) The PVC doors shall be fixed as per manufacturer's instructions and as directed by Engineer-in-charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. Note : Glass and mesh shall be measured and paid for separately.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to steel window and wodden door shutters complete all as specified & directed.

S & F 18 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side decorative as in Sink/ Wash Basin cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of REHAU or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed.

S & F 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side un decorative as in back of kitchen cabinets complete all as specified and directed..

S & F stainless steel Auto clave hinge fancy type of approved make complete all as specified & directed. Make Nebco or equivalent

S & F 100mm size stainless steel handles fancy type anf fixed with screws complete all as specified & directed

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150mm size SS handles cast moulded type fixed with screws complete all as specified & as directed.

S & F 200mm long SS barrel tower bolts not less than 12 mm dia of extruded section complete all as specified & as directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. complete all as specified and directed.

S&F vitreous china Squatting pan 'Orissa' pattern water closet white size 580mm x 440 mm with integral foot rest (excludinfg flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphone pipe etc complete all as specified & as directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.

S&F toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F water storage tanks 500 litres capacity, rotational moulded, double layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs all as specified in SSR Part-I incl dismantling old one and removing complete all as specified and directed.

S & F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and directed.

M & L vitreous china WHB, oval type, italian collection (including all fixing arrangement joint etc and connection ) complete all as specified and directed. Make : CERA, star white, Cat Part No : 10017 or equvilent in Jaquar or hindware as approved by GE

S & F pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed Make : Jaquor Cat Part No : KUP-35001PM or equvilent in Cera or hindware as approved by GE

M & L two way bib tap wall flange cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed Make : Jaquor Cat Part No : ORP-10041PM or equvilent in Cera or hindware as approved by GE

S & F health faucet (ABS Body) with 8mm dia, 1.5mtr long spirochrome flex tube & wall hook complete all as specified and directed. Make : Jaquor Cat Part No : ALD-587 or equvilent in Cera or hindware as approved by GE

S & F stainless steel CP Grating doom 100 mm dia with waste hole complete all as specified and directed.

S & F stainless steel CP Grating doom 100 mm dia complete all as specified and directed.

S& F 32 mm bore PVC waste pipe 75 mm long of approved make complete all as specified and directed.

S&F 25mm bore gun metal gate valve with iron wheel head,screwed down, high pressure, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified & as directed.

S&F angle/stop valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

S&F double Soap dish, CP brass 'R' type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F brass CP towel rail 20mm dia, D type 60 cm long complete all as specified and directed.

S&F 15 mm dia GI tubing, medium grade, with all necessary fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed.

S&F 25 mm dia GI tubing, medium grade, with all necessary fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed.

M&L 18-20 mm thick kesaria Green marble (table rubbed & polished) in cooking plat forms & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

M&L for 25mm marble slab as in vertical partitions, below kitchen cooking plat form and raised platform of kitchen, under kitchen platform complete all as specified and as directed.

S & F 4mm thick figured glass pin headed type and glazing with oil putty in square nexc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes, single socketed in length with rubber ring joints fixed to wall with and incl suitable SS clamp complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes, single socketed in length with rubber ring joints fixed to wall with and incl suitable SS clamp complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm dia PVC (SWR) outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified and as directed.

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M&L precast cement concrete type B1 1:2:4 (20 mm graded aggregate ) set in cement mortar 1:4 in landing, cover slabs (for manholes etc.) chullah hoods,chajjas,water troughs, mangers,shelves and similar articles with plain faces including chamfers, weathering, throating etc complete all as specified and directed

M&L for providing plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in bed to drain pipe of including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed.

S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming toIS 1161-1979 graded St-240 complete all as specified and as directed.

S&F Mild Steel work in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 (Gde E 165) complete all as specified and directed.

S & F mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment conforming to Fe-410 W (Gde E- 250) quality A complete all as specified and directed

M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base to flooring complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring and all other similar works finished even and smooth using extra cement complete all as specified and directed.

S&F mild steel framed such as grills, gratings, etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk way, railings, frame work of water tankand similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel work as in hold fast, hook, pintol hinges or similar works conforming to Fe 290, Gde 165 and simlar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F Expanded metal, weight n exc 4kg per sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.

S&F Mild steel, plain, black sheet 1.25mm thick in hearths, covering to door shutters, covering to door chowkats frames, chullah hoods, water tanks, etc. cut to size edges beaded if directed, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed.

M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Surface excavation n exc 30 cm depth and averaging 15 cm depth and getting out soft/loose soil complete all as specified and directed.

Add to item No. 86 above for every 3cm or part thereof above 15cm average depth complete all as specified and directed.

M&L for 100mm thick plain cement concrete (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base finished even and fair complete all as specified and directed.

M&L machine pressed precast concrete interlocking coloured rubber moulded paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and pigment laid over 25mm thick sand cushion complete all as specified and directed. Note : Sand for cushioning shall be measured and paid seperately.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for PCC path complete all as specified and as directed.

M&L preparation of new concrete/ brick/stone surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of priming paint plaster complete all as specified and as directed.

M&L for precast concrete kerb stones of cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) solid blocks, exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

Taking out delineators embedded in ground in any type of PCC and refixing the same in and aincluding PCC 1:3:6 aside of the path complete all as specified and as directed.

M&L for reinforced concrete pipes, 150mm dia, class NP2, laid and jointed complete all as specified and as directed.

E/M Portion M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade not less then 20mm dia ISI marked with modular metal flush box of thickness not less then 1.0mm thick for covered with modular white sheet cover plate for mounting, switches, sockets, fan regulators etc for one light point controlled by one switch complete all as specified and directed.

,---ditto--- all as per item No. 96 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed.

,---ditto--- all as per item No. 96 here-in-before but for one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken GI metal boxes not less than 1.0mm thick and incl white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc for 3 pin 16 amps socket outlet point controlled by one switch on independent board complete all as specified and directed.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate body complete all as specified and directed.

S&F MCBs Distribution board SPN, 4 ways powder coated, CRCA steel sheet, IP-43, IK09, with reversible double door, 415V, recess mounted having insulated 100 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F in repair MCBs of 'B' curve double pole 40 to 63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F LED batten (0.6m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 900 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 10 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed.

S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 105 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. Make - Philips Cat part BN308C LED20S-6500 L120 PSU WH, Crompton Cat part CIS-305-40-57-SL-DP-NWH, Havells Cat no STOUTPLUS600BS20WLED840SPCWH.

M&L for sub main wiring with two run of 6 Sqmm single core, PVC insulated, FRLS multistranded copper conductor cable alongwith one run of 6.0 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed PVC conduit of 20mm dia ISI marked ivory colour & accessories of suitable size including making connection as required complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire & One run of 6 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length.

S&F exhaust fan, high speed, steel body 300mm sweep, 1200 RPM, four blade, heavy duty motor, copper wound double ball bearings, grey colour with louver fixed on wall by making suitable size of hole and proper arrangement with nuts, bolts and washers and three core 0.75sqmm copper cable connection complete all as specified & directed.

Labour only for boring under road/ drain /PCC path by mannual method for inserting the 25mm dia GI tubing complete all as specified and as directed

S&F 20mm bore gun metal gate valve with iron wheel head,screwed down, high pressure, screwed both ends for iron pipe or for union complete all as specified and directed.

Supplying, laying, connecting and testing 25mm bore steel water tubes medium grade galvanised with all fittings laid in trenches or fixed in wall or ceiling or laid in floor complete all as specified and directed

Supplying, laying, connecting and testing 20mm bore steel water tubes medium grade galvanised with all fittings laid in trenches or fixed in wall complete all as specified and directed

M&L for cutting & screwing the existing line up to 80 mm dia and make new connection including all necessary fittings for leak proof conection complete all as specified and directed

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Shiv Construction Company

Satish kumar and company

ANKIT BUILDERS

MSR INFRATECH

Shree Karni Electrovision