Repair and Maintenance work for Amma unavagam at Jawaharmaithanam at ward 35 in Rajapalayam Municipality

Dadooingwall with printed design colour glazed tiles of size 300 x 200 x 6mm with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supply and Installation of HDFR False ceiling, square edge, magnesia cement core panels of size 1200x2400x10mm, volume density 1000kgs/m3, weight 10kg/m2, GreenPro certified, installed by using Strut ceiling framework. The Strut ceiling framework system shall include Strut WC25, fully knurled, sectional thickness 0.55mm, length 3600mm, unequal flanges of 20 & 30mm and web of 25mm, fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then suspend Strut MC45, fully knurled, sectional thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the soffit at 1200mm centers with Strut SA25, fully knurled, Suspender angle with sectional thickness 0.55mm, unequal 1 flanges of 25 & 10mm. Strut CC25, fully knurled, sectional thickness 0.55mm, length 3600mm, web 35mm, depth of 25mm and equal flanges 9.5mm is fastened to the Strut MC45 perpendicularly at 400mm centers. HDFR 1200x2400x10mm is installed on the Strut CC25 with self drilling drill tip fasteners in a staggered manner. Long edges of panels should be perpendicular to length of strut CC25, 4mm gap should be maintained between adjacent boards on all sides and filled and finished with Seam Kit. Technical Parameters Fire (Class)-1 & P Thermal (W/mk)-0.118 Climate ("C, RH) -50, 95 Light (%) -Paint dependant, Green (VoC, RC %)- Low, 30 as directed by the department officers. The cost includes, cost of material, cost of labour, Scaffolding, Transportation, Conveyance Etc. complete complying to standard specication. Sqm 2550.00

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings andFloat Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

1000 Litres

Providing and fixing advanced type turbo ventilator to self-supporting roof (Size: 2’x14’) along with 24” turbo ventilators module to self-supported roofing systems. The sheet fixing shall be done to suit the profile of corrugated galvalume sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2mm thick aluminium angel 25x25mm with self-tapping screw to panels. Ventilator should be fixed on 1 to 2mm thick G.I ring which be fixed on 2mm thick polycarbonate sheet. All joints shall be sealed by silicon, include of all material, labour, fittings. Deduction shall not be made for cutting area of self-supported roof.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.

Supply and fixing 20W 4 Feet LED Fitting with LED including all cost and conveynce of materials etc, complete

Supply and fixing 18W LED 3000K Round Type Recessed Fitting with LED including all cost and conveynce of materials etc, complete