GE/ALP (8438) KOLKATA OF 2025-26

Amount

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L for 5mm thick plastering on ceiling surfaces in CM (1:3) surface finished even and fair complete all as specified and directed.

M&L for 20mm thick (in two layer) plastering on fair face of Brick surface with CM (1:4) mixed with WPC finish surface even and smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster with CM (1:6) on other than fare face of brick wall finsh even and smooth without using extra cement all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) Type B1 (1:2:4) (20mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 9 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar (1:4) complete all as specified and directed.

Dismantling removing all unsound concrete, plastered material by chipping/chiseling gently at all effected and adjoining areas of concrete etc till sound surface is reached all various locations in building (upto 4 storied) subsequently cleaning the surfaces by hair brush and air blower and removing rubbish off the premises and disposing at the dumping site as approved by local authorities including hoisting assembling and fixing of double layer steel scaffolding to external perimeter of building complete all as specified and directed .

Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiseling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area thoroughly by water and allow it to dry and totally rust free of reinforcement bar all as complete as per manufacturer's instruction as specified (upto 4 storied bldg). Make( Rust removing chemical ):- Reebaklens RR of FOSROC or equivalents solutions SIKA/STP.

Material , labour and preparation of existing reinforcement surface by brush and application of two component epoxy zincrich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre. complete all as specified (upto 4 storied bldg). Make- Nitozinc primer of FOSROC or equivalents.

Material and labour for introducing new reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified.(upto 4 storied bldg)

M&L for supply, mixing and placement of micro-concrete cement based prepacked single component chloride free, sulphate free, non-shrink, free flow. elf compacting, ready to use after mixing water in specified proportion of Sika Rep Microconcrete-4 or renderoc-RG of Fosroc in required thickness as per manufacture's instruction and all as directed. Compressive strength (ASTN C 109,cm cube) of 35 MPa at 28 days including application curing compound concrete WB manufactured by Fosroc of equivalent at various locations in Bldgs including necessary form work complete all as per manufactures specification.(upto 4 storied bldg)

M&L for providing and applying at two component structural grade polymer modified reinforcement mortar Fosroc Renderoc S2 or equivalent product of SIKA upto a thickness of 30 mm over a coat of epoxy resin bonding agent Nitobond EP. The cured mortar shall achieve a minimum compressive strength of 12N/mm2 in a day & 45 N/mm2 in 28 days with Flexural strength 8N/mm2 in 28 days Chloride diffusion coefficient shall be Nil after 24 hours when tested by Accelerated electrochemical chloride ion diffusion test method and the depth of carbonation shall be Nil after 24 hours when tested by Accelerated carbonation test. in addition to this percentage of water absorption should be 0.45 after 24 hours in immersion test at various locations in Bldgs complete all as per manufacture's specification.(upto 4 storied bldg)

Material , labour for applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction complete all as specified.(upto 4 storied bldg) Make:- Concure LP90 of FOSROC or equivalents solutions SIKA/STP/ Maruti / Choksey chemicals.

Bore packing of all the Spouts to be done with grouting admixture mixes with Cement Concrete / Mortar @225 ml per bag of Cement complete all as specified and directed.

M&L for providing grouting in RCC walls and slabs by drilling holes @300 mm c/c upto half of the wall depth in zigzag manner using a drill machine and fixing a nozzle of 20mm dia, for injecting of epoxy grout till the refusal of injected grout material (grouting operation pressure shall be in between 2 to 4Kg per sq cm) followed by cutting the exposed nozzle so as to make the wall/ slab free from the grouting pipe and to seal the gap with polymer modified mortar complete all as specified and directed. .

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 sqm n.exe 4 sqm each complete all as specified and directed.

Taking down rusted steel windows/ventilators of any description and size including shutters complete all as specified and as directed

S&F for Factory made single extruded WPC(Wood polymer composite) solid door Frames of size (45 x 70)mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), mimimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as directed.

S & F S&F for Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), mimimum compressive strength of 50 N/Sqmm, modulas of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per dirns of EIC.

S&F 12 mm thick prelaminated particle boards (ISI marked), interior grade prelaminated both side with decorative choice lamination, fixed with necessary clips and other like to aluminium frame work, as in doors, windows, partition etc complete all as specified and as directed.

S&F 4.8 mm thick glass ordinary quality, frosted on one side fixed to aluminium frame work n. exc 0.5 Sq. m in each pane complete all as specified & as directed.

S&F Stainless steel handles 150mm long, bright polished complete all as specified & as directed.

S&F Stainless steel handles 100mm long, bright polished complete all as specified & as directed.

S&F 150mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified & as directed.

S&FAluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F Bearing hinges 100mm, cast brass, with Stainless steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F for Stainless steel wire cloth having 0.36 mm nominal dia of wire and average width of appreature 1.40 mm and fixed with stainless wire staples complete, all as specified .

S&F in repair aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

Dismantling floor , earth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, all as specified.

M&L Anti-skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.06sqm but n.exceeding 0.11 sqm in toilet/bath floor etc.set and jointed with adesive and pointed in epoxy grout with spacers complete all as specified & as directed. Note: Screed bed shall be measured and paid separately

M&L for glazed ceramic (coloured) tiles of size 450x350 6-7mm thick as in vertical surface/dado set and jointed in adesive and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, indow-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

M&L for bedding layer of mortar 10 mm thick in CM (1:3) for laying wall/dado finishes complete all as specified and directed

Demolition of cement concrete above ground floor n.exe 15cm thickness(below or above ground level) complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, (1:2:4) using 12.5mm graded stone aggregate complete all as specified and directed

Supply and applying two coats of High performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. Coving of RCC joints with PCC (1:1.5:3) mixed with Integral Water Proofing compound. Applying one coat of Waterproofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. Sprinkling fine stone aggregate immediately after the application of second coat to get the mechanical key for protective plaster. Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency). Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.( Fosroc/Elantas beck/Kunal conchem) ( Make : SIKA/FOSROC/Hindcon )

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 20mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed (upto 4 storey bldg).

Taking up or down 25mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed (upto 4 storey bldg). complete all as specified and directed

Taking up or down 40mm or 50mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed (upto 4 storey bldg) complete all as specified and directed.

Taking down UPVC pipe 50 mm bore with fittings complete all as specified and directed.

Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed

S&F CPVC pipes 15 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&L 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as directed.

S&L in 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as directed.

S&F galvanised 40mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed (upto 8 storey bldg).

S&F 50 mm bore (Outer dia) UPVC pipes of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed

S&F 25mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed

S&F 50 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 50 mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed

S&F PVC (SWR) bends 110mm dia complete all as specified and directed

S&F PVC (SWR) junction single, (Single T) equal or unequal 110 mm diacomplete all as specified and directed

S&F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete complete all as specified.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed.

S&F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed

S&F in repairs 15mm bore CP angular valve fancy type,with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed.

S & F in repairs 15 mm Dia CP Bib taps,fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm Dia CP Bib taps (Two-in-one), fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm Dia CP stop cock(concealed type) , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore CP pillar taps, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure ,complete all as specified and directed.

S & F in repairs 25 mm Dia brass gun metal gate valve , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair CP Health faucet with all necessary fittings . Make : Prayag/Cera/Jaquar

S&F in repair 600 mm PVC connection pipe 15 mm size with PTMT nut of following length complete all as specified and directed .

S & F in repair 110/125 mm floor trap fixed in floor with grating incl jointing with solvent (1:2:4) cement concrete,complete all as specified and directed

S&F in repair brass CP Shower roses in repair with or without swivel joints, 125mm size, including fixing to steel pipes or union comlete all as specified and directed.

S&F CP Soap dish, fixed to plugs with chromium plated brass screws comlete all as specified and directed.

S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specfied and directed.

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approved by GE complete all as specified & directed.

S&F Louvers type ventilator assembled partially with PVC exhaust fan of 200mm sweep and partially fixed with frosted glass of area n.exc 0.5 sqm including all necessary fittings complete all as specified and directed.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing of rotational moulded polythene water storage tank 1000 litre capacity ISI marked (cylindrical, vertical, double layered with closed top) hoisted and fixed in position including PVC float valve 20mm bore weight not less than 210gms complete all as specified and directed

Taking out/Stripping of old Roof treatment membranes/Tar felt incl layer of cement mortar of any type carefully from roof surfaces (without damaging roof ) and incl preparation of old roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust & receive new treatment complete all as specified and directed.

Material and labour for carry out waterproofing treatment to sound, moisture free concrete surface using Nitoproof 600PF - Liquid applied single component pitch free polyurethane coating capable of bridging substrate cracks upto 2 mm. System includes proper surface preparation to remove loose dust, dirt, loose mortar, curing compound etc., and application of Nitoproof WB Primer, Water dispersible epoxy primer followed by two coats of Nitoproof 600PF coverage @ 2.0 kg/m2 to achieve 1.5 mm WFT in two coats followed by laying of separation layer of 120 gsm non-woven geotextile layer before carry out protection screed etc. complete including all tools and tackles as per manufacturer’s specification. Nitocote 600PF cured material shall be having crack bridging of 2 mm, Elongation (ASTMD 412) – >600 %, Tensile Strength (ASTM D412) –2.5 N/mm2, Recovery from Elongation (ASTM D412) – 95 %, 85% Solid Content, Tear Resistance (ASTM D624) – 15 Kn/m, Shore A Hardness (ASTM D2240) – 60, Water vapour transmission- 0.6 g/m2/hr, Water Permeability @ 5 Bar (BS EN 12390)-Nil, Service Temperature – -40°C to 70°C, Flash Point > 70 °C, Viscosity-60p, Specific Gravity-1.5. The item rate shall be including of all kinds of labour, tools & tackle, machineries, lead & lift, mathadi charges, curing, wastages, consumable, cleaning, shifting of debris outside the site premises, surface preparation, etc. complete as per design, drawing & instructions of EIC. Cost of 120 gsm non-woven geotextile and 75mm Screed concrete Shall be paid separately.

Supply & Laying Geotextiles of 120 Gsm over the waterproofing coating to avoid damage during screed casting complete as per specification and as directed.

Supply & laying of maximum 75 mm thick (at RW outlet) protective screed over the waterproof coating at proportion of 1:2:4 admixed with suitable integral waterproofing compound conforming IS 2645:2003 @ 200ml per bag of cement and reinforced with PP fibres with proper slope towards RW pipes. Green stage saw cutting on the screed will be done in panels (3m X 3m) with a groove size of 10mm X 15mm Complete as per specification and as directed.

Complete removal of existing treatment by using electric sander machine or steel wire brushing to remove all dust and loose scale etc of wall surfaces & prepare to receive wall care putty complete all as specified & directed.

M&L for 3mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. complete all as specified & as directed.

M&L for preparation of newly plastered wall surface two coats of oil emulsion distemper over a coat of primer on complete all as specified and directed.

M&L for preparation old decorated walls & applying two coats of acrylic oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 2mm thick wall care putty and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 1mm thick wall care putty and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed.

M&L for preparation of new decorated Ceiling surface & applying two coats of acrylic oil emulsion distemper complete all as specified and directed.

M&L for preparation of old decorated Ceiling & applying one coats of acrylic oil emulsion distemper complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), type C2, using 40mm graded stone aggte as in plinth protection / paving, surfae finished even & smooth with using extra cement as complete as specified and directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr deep for foundation etc. n. exc 10 Sqm on plan and n. exc 1.5 mtr deep and getting out in hard/dense soil.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation complete all as specified.

Returning filling including spreading, leveling, watering in layers n. exc. 15cm in any type of soil complete all as specified and directed.

Removing excavated soil to a distance exc. 50 mtr and n. exc 250 mtr from starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.

M&L for formwork to flat rough finished surfaces of concrete sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for formwork for rough finished surfaces of concrete to sides of pillars, posts, piers, coloumns and stanchions complete all as specified and directed.

M&L for RCC type B1 (1:2:4) (20mm graded stone aggregate) Nominal mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC type B1 (1:2:4) (20mm graded stone aggregate) Nominal mix as in coloumns, pillars, piers, posts and struts complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5 cm to 30 cm long (dia of neck 16 mm to 20mm) complete all as specified and directed.

S&F Steel work in tubular trusses, posts,rafters, struss etc including special shaped washers etc. complete using ERW or induction butt welded tubes incl preparation surfaces and applying one shop coat of Zinc chromate primer paint etc complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

S&F for Pre painted galvalume aluminium zinc coating GI based corugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and directed.

Material and labour brick work with fly ash brick straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with fly ash bricks old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

M&L for Rendering 20 mm thick in two layers (Top 10mm thick rendering coat mixed with water proofing compound shall be laid over 10mm thcik plastered surface) with CM (1:4) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement to match the existing surface complete in all respect as specified and directed. Note: WPC shall be measured and paid separately under relevant items

M&L for Rendering 15 mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface fair & even without using extra cement to match the existing surface all complete all as specified and directed.

Supply only Integral water proofing compound complete in all respect as specified and directed.

M&L for cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggregate as in hold fast block kerbs or mud stops, rounded or chamfered etc complete all as specified and directed.

Providing& fixing aluminium 10-15 micron powder coated louvered with series-B (18mmx40mmx1mm) thick aluminium pipe frame work, actuating bar with glass holder, locking handle 5mm fdrosted glass at top of ventilator balance portion fixed with frosted glass of same quality complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long, fabricated type,anodised complete all as specified & as directed.

S&F stainless stell sliding door bolts 200mm long with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts complete all as specified & as directed. Make : Prayag Cat Part No SLD-1212 or equivalent make as approved by GE.

S&F Stainless Steel tower bolts with squre type of extruded section with 200 mm long bolt, complete all as specified & as directed. Make : Prayag Cat Part No TBS-2250 or equivalent make as approved by GE.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement mortar (1:2) using marble dust with admixture of pigment to match with shade of granite complete in all respect as specified and directed. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch "A') Note : Size of Granite shall be decided by GE

Hard core of gauge in exc. 63mm broken stone boulders deposited and spread and levelled in layers in.exc. 15mm thick complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (40 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

M&L backing coat/Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) as in dado/skirting complete in all respect as specified and directed.

S&F CPVC pipes 16 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F CPVC pipes 50 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor. etc complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector bent type complete all as specified & as directed.

S/F in repair PVC (SWR) vent cowl 110 mm dia complete in all respect as specified and directed.

S&F half stall Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F Toilet paper holder of Chromium Plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 100mm dia comlete all as specified and directed.

Supply and fixing of rotational moulded polythene water storage tank 1000 litre capacity ISI marked (cylindrical, vertical, double layered with closed top) hoisted and fixed in position including PVC float valve 20mm bore weight not less than 210gms complete all as specfied and directed. .

M&L for applying Finishing walls in new surfaces with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete in all respect as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper over a coat of 3 mm wall care puty complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required complete all as specified and directed.

S/F 200mm bore salt glazed stone ware drain pipes laid in trenches and jointed including demolition of old pipes etc complete all as specfied and directed.

M&L for concrete bed in cement concrete (1:3:6) type C2 to drain pipes of 200 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specfied and directed.

S&F for Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/valley gutter fixed with self tapping screws as specified.

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L Screed bed or bedding layer 20 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement in equal proportion & no pigment over 15mm thick screed bed with CM (1:6) complete all as specified and as directed

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including concealed PVC conduit not essthan 20 mm dia with concealed modular box suitable for logic modular switches , sockets , etc with logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of cover plate and blank plates as per site requirement (No extra payment will be made for the same)

One light point / one fan point controlled by one, one way swtich.

All as per item No 144.01 here in before but for 5 Amp switch socket on independent board.

All as per item No 144.01 here in before but for 5 Amp switch socket on the same board.

All as per item No 144.01 here in before but size of cable 4.0 sq mm with earth wire of 4.0 sq mm complete all as specified and directed

M/L for modular switch 6 Amps single pole one way complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

M/L for modular socket outlet 2/3 pin 6 Amps combined 2 module complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

All as per item No 144 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed.( circuit to be laid seperatly )

S & F modular socket multipurpose 3 pin 6/16 Amps 2 module complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

S &F modular switch 16 Amps single pole one way, one module complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

S/F ceiling rose , 3 phase/pvc/polycarbonate, isolated body complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

Supply & fixing modular white cover plate with frame for fixing of modular switches of following :-

All as per item No 151 here in before but 8 module complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

All as per item No 151 here in before but 6 module complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

All as per item No 151 here in before but 4 module complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

All as per item No 151 here in before but 3 module complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

S & F blank speacer plate for single module complete all as specified and directed. (Make: Havells /Indo Asian/ legrand)

S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral double door, 08 way, 240 Volts in concealed complete all as specified and directed (Make: Havells /Indo Asian/ legrand)

S &F MCB SPN 32 Amps 240 volts 10 KA rating complete all as specified and directed (Make: Havells /Indo Asian/ legrand)

S&F MCB SP 05 to 32 Amps 240 Volts 10 KA rating complete all as specified and directed (Make: Havells /Indo Asian/ legrand))

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed. Make: Havells/Legrand/L&T/C&S.

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete as as directed and as specified.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

M & L GI water tubing , medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in trenches or under roads, bore of pipe 25mm, complete all as specified and as directed.

M & L Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for foundation of poles, stays, laying of cables etc, complete all as specified and directed.

M&L Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type soil complete all as specified.

M & L Removing surplus excavated material (soil) not exceeding 50m and deposing where directed at a level not exceeding 1.5m above the starting point and entire satisfaction of Engr-in-Charge complete all as specified and as directed.

S & F energy efficient 5 star rated 250 mm PVC air ventilating fan, complete with louvers and making hole to the existing wall, making good to the disturbed surface as per existing and connecting wire up to nearest ceiling rose complete all as specified and directed.

Supply and fixing in replacment of ceiling rose of size 65mm x 50 mm surface bakelite 240 Volts three terminal as specified and directed.

Supply & fix LED 20W surface mounted square shaped luminaire with high transmitivity diffuser suitable for office surface mounted with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length complete all as directed Make-crompton LSRP-20-WW /Havells /Wipro

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and fix power unit 32 Amps including socket 25 AMp ,06 module metal box box for mounting of power unit complete as specified and directed. Make : Legrand Cat Part No.6755 58 /Havells/ ABB/ L&T. for Power unit , 6772 32 for socket 25 Amp and 6890 10 for metal box 6 Module

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00 mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of (1:2:4) type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

RADHA ENTERPRISE (BID ID -3314008)

ESS PEE UDYOG (BID ID -3314713)

PUTUL CONSTRUCTION CO. (BID ID -3313955)