REPAIR/REPLACEMENT OF SANITARY FITTING, PLUMBING WORK AND ALLIED WORKS AT AF STN THOISE AND AT BASE CAMP UNDER GE(AF) THOISE

Amount

Supply and fixed in repairs sinks made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with waste coupling and pipe all complete as specified and as directed.

Supply and fixed in repairs sinks made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with waste coupling and pipe all complete as specified and as directed.

Taking down rainwater/soil waste & vent pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed by Engr-in-Charge.

M&L for PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engr-in-Charge.

M&L for PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified and as directed by Engr-in-Charge.

M&L for PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm cast iron,sand cast, soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors incl dismantling complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for fixing of WC and making good floor to match the existing surface, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including PCC (1:2:4) type B-1) for fixing of WC and making good floor to match the existing surface, complete all as specified and as directed by Engr-in-Charge.

S & F in repair for Stainless sreel indian water closet pan (Orissa pattern), of size 584.2mm x482.6mm and 3mm thick,Oval shape (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cisterns, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Vitreous China wash basin, flat or angle back type, size 600x480mm, white, including cutting for and pinning in ends of brackets or erecting stand, waste coupling 32 mm PTMT, PVC waste pipe excluding taps, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed by Engr-in-Charge.

S & F in repairs for stainless steel wash basin (304 grade heavy duty rust proof),grid type drain and rectangular in shape, size 500x300mmx150mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm waste coupling of PTMT (half or full threaded) (minimum weight 32 mm -45gms/40 mm-60 gms). complete all as specified and directed.

S&F in repairs towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and as directed by Engr-in-Charge.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and as directed by Engr-in-Charge.

S&F for Galvanised steel tubes, medium grade, 15 mm dia, fixed to walls, ceilings or laid in floors including taking up or down complete all as specified and as directed by Engr-in-Charge.

S&F for Galvanised steel tubes, medium grade, 20 mm dia, fixed to walls, ceilings or laid in floors, including taking up or down complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI Tee 15mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI Tee 20mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI elbow 15mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI elbow 20mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI union 15mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI union 20mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI socket 15mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI socket 20mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI Nipple 15x50mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI Nipple 15x75mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI Nipple 15x100mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

Supply & fixed in repairs GI Nipple 15x150mm (ISI Marked), complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms), complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Bib taps 15 mm dia (chromium plated), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Stop valves, 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Angle stop valve of PTMT, 15 mm dia, any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms), complete all as specified and as directed by Engr-in-Charge.

M&L for disconnecting existing PVC water tanks, exc 250 & n exc 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, complete all as specified and as directed by Engr-in-Charge.

M&L for disconnecting existing PVC water tanks, exc 500 & n exc 1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, complete all as specified and as directed by Engr-in-Charge.

M&L in repairs for ball brass valves 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PUF Insulated tank capacity 500 Litres, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PUF Insulated tank capacity 1000 Litres, complete all as specified and as directed by Engr-in-Charge.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified and as directed by Engr-in-Charge.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and as directed by Engr-in-Charge.

S&F in repair soap tray vitreous china embedded in wall, complete all as specified and as directed by Engr-in-Charge.

S&F in repair cast iron floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4, using 20mm graded stone aggreagte), complete all as specified and as directed by Engr-in-Charge.

S&F in repair cast iron nahani trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4, using 20mm graded stone aggreagte), complete all as specified and as directed by Engr-in-Charge.

S&F in repair vitreous china urinal, bowl type, size 465x355x265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600mm, complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 900mm, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC gully traps, square or round mouthed, type 'P', size 110 x 110 mm, complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC gully traps, square or round mouthed, type 'S', size 110 x 110 mm, complete all as specified and as directed by Engr-in-Charge.

S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight - 45gms), complete all as specified and as directed by Engr-in-Charge.

S&F in repair 40 mm Waste coupling of PTMT (half or full threaded) (Minimum weight -60 gms), complete all as specified and as directed by Engr-in-Charge.

S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight -45gms), complete all as specified and as directed by Engr-in-Charge.

S&F in repair jet pressure of chromium plated, complete all as specified and as directed by Engr-in-Charge. (Make : ESSCO/LEADER/SONA/PARCO)

S&F in repair health faucet of chromium plated, complete all as specified and as directed by Engr-in-Charge. (Make : ESSCO/LEADER/SONA/PARCO)

S&F 1000 ltrs rotational moulded polyethylene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers incl ball brass valves 20 mm, high pressure with polythene float and flynut etc including dismantiling complete all as specified and as directed by Engr-in-Charge. (Make : Sintex or Polycon).

S&F 500 ltrs rotational moulded polyethylene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers incl ball brass valves 20 mm, high pressure with polythene float and flynut etc, including dismantiling complete all as specified and as directed by Engr-in-Charge. (Make : Sintex or Polycon)

M&L for 16mm, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, including taking up or down complete all as specified and as directed by Engr-in-Charge.

M&L for 20mm, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, including taking up or down complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 20mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed by Engr-in-Charge.

Making connection of PP-R pipe 16 to 40mm distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc, complete all as specified and as directed by Engr-in-Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 350X 250 7mm/ 450X 350X 7mm thick set over 10 mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 300x 200x 7mm thick set over 10 mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed by Engr-in-Charge.

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick over 15 mm thick screed bed in CM 1:4, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed by Engr-in-Charge.

M& L Non Skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including15 mm thick screed bed in cm 1:4 in floors etc. set and joint free in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge.

M/S GHULAM MOHAMMAD CHATAPA (BID ID -3284111)

MEHDI ALI (BID ID -3284093)

M/S INDUS HIMALAYAN EXPLORERS (BID ID -3284127)

MS SHOWKAT ALIJOO (BID ID -3284070)