Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹17.5 L+₹2.3 L (15.1%)Rejected-Finance HOUSE NO 87 SHAH FAISAL ABAD DHOBI MOHALLA BATAMALOO SRINAGAR 190009 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190009 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹18.1 L+₹2.9 L (18.8%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹18.9 L+₹3.7 L (24.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹20.1 L+₹4.9 L (32.3%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹25.2 L
EMD Value
₹50,400
Closing Date
24 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj. Sujith Mohan, GE
Garrison Engineer 864 Enggr Wks Sec, PIN-913864,C/o 56 APO
Certain comprehensive repairs / maint in Zone A area and RR Bn at BB Cantt Srinagar
2023_MES_620569_1
864/ws-69/2023-24
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹50,400
Yes
13 Nov 2023
26 Sept 2023
28 Oct 2023
26 Sept 2023
24 Oct 2023
10 Oct 2023
Amount
Dismantling plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof coverings complete, all as specified and as directed
S&F Galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coatch screws and washers in roofs, 0.63 mm thick m Gde-o quality, with 120 grms/sqm zinc coating and Gde 'B' (i.e 12.5 mm ) corrugation, complete, all as specified and as directed
S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers complete all as specified and as directed
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.
Dismantling timber scantling 40 sqm and over in section in any position as in unframed/framed work complete, all as specified and as directed
M&L 2nd class hard wood as in scantling clean sawn, complete, all as specified and as directed.
Dismantling of wall and ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and as directed.
M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling, complete, all as specified and as directed.
S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc complete, all as specified and as directed.
S&F 2nd class soft wood plain clean sawn fillets square, rectangular or triangular in section exc 6 sqcm & n.exc 13 sqcm secured with nails or brads complete all as spd and directed
Dismantling wooden boarding, any description , fixed in any position with nails complete all as specified and directed.
S&F 20mm thick boarding clean sawn as in eaves board fixed with nails complete all as specified and as directed.
S&F 15 mm thick 2nd class soft wood clean sawn boards or planks, width n.exc. 25cm as in wall boarding complete all as specified and directed.
S & F 18/19 mm thick preliminated particle interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screwed to timber frame work as in shelves in kitchen, almirah, cup boards complete all as specified and as directed .
S & F in repair Hasp and staple 100 mm safety type Aluminium anodised , with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and as directed .
S&F continous (piano) hinges, 30mm wide mild steel bright hinges 30mm with of flap , mild steel bright finished or electrogalvanised, complete all as specified and as directed.
Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair all as specified and as directed.
M&L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete, all as specified and as directed.
M&L for Vitrified coloured ceramic tiles 9 to 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of mortar 1:6 for layig floor finish complete all as specified and as directed
M&L 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring finished even and smooth with out using extra cement complete all as specified and as directed.
75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection/ path/ hardstanding, laid in panels complete complete all as specifed and as directed .
Supply of 3 mm thick glass dividing strips, width 38 mm and inserted in position conforming to design complete, all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete, all as specified and as directed
M&L for Glazed ceramic coloured/printed tiles 350x250mm or 450X 350mm and 7mm thick as in vertical surfaces such as dado, skirting set jointed in neat cement slurry including pointed in white or coloured cement to match over and including 10 mm thick screed bed in cement mortar 1:4 complete, all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar, complete all as specified and as directed.
M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thcik screed bed or bedding layer in CM 1:3 complete all as specified and directed.
Taking out UNSV storage water tank of capacity 1000 Ltrs complete all as specified and as directed.
Taking out UNSV storage water tank of capacity 500 Ltrscomplete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank ISI marked (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 1000 ltrs, incl ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank ISI marked (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 500 ltrs, including fitting ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia complete all as specified and as directed.
S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia all as specified and as directed
S&F ball in repair valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia all as specified and as directed
Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit. complete all as specified and as directed.
Tubes, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors , complete all as specified and as directed.
Taking up or down steel tubing 20 mm dia and connections and stacking neatly for offering credit. complete all as specified and as directed.
Tubes, medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors
M&L for removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed .
M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and as directed.
M&L for lagging to pipes of internal dia 20 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and as directed.
S&F in repair 15 mm dia bib taps, cast copper alloy wth crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm dia and confirming to IS-781-1977 , complete all as specified and as directed.
M&L PBS roll 20 mtr long and 100 cm wide type-III weight 40 Kg per roll (As per sample) complete all as specified and directed.
Taking down chowkat or frames with shutter (without taking off shutters from the frames) not exc 1.5 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed .
Taking down chowkat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed .
Taking down shutters of any description n.exc 1 sqm each, complete all as specified and as directed .
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each, complete all as specified and as directed .
S&F 2nd class hard wood plain, solid chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete, all as specified and as directed.
S&F Factory made 35 mm thick 2nd class hard wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed.
S&F Factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a) complete all as specified and as directed .
S&F Factory made 30 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (b) complete all as specified and as directed .
M & L PCC 1:2:4 type B1 using 20 mm graded aggregates as in Hold fast blocks rungs etc including necessary form work complete all as specified and directed by Engineer-in charge
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specfied and as directed
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing
S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm complete, all as specified and as directed
S&F butt hinges, medium weight cold rolled, mild steel of size 75 mm complete, all as specified and as directed
S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified
S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified
S&F 150 mm aluminum alloy handles, fabricated type, anodised complete all as specifed
S&F 100 mm aluminum alloy handles, fabricated type, anodised complete all as specifed
S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixin glips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair.
Hacking out old broken glass (any thickness size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed incl S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete, all as specified and as directed
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete, all as specified and as directed
S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete, all as specified and as directed.
M&L for preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water etc.
M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:6,even and smooth w/o using extra cement .
M&L for Rendering 10mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:4,even and smooth w/o using extra cement .
Supply only liquid integral water proofing compound.
M & L preparation of new plastered surface and applying two coat of cement base paint of approved tint/ colour on wall including cornices, pilasters over a coat of primer as directed by Engr-in-Charge and all as specified
M & L preparation of new plastered surface and applying applying two coat of distemper oil emulsion, white or tinted over a coat of primer as directed by the Engr in Charge.
S & F in replacement curtain rod 20 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and directed by Engineer-in-Charge. Note:- The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.
S & F in repair aluminium channel of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed by Engineer-in-Charge.
Dimantling pipes of any desc.fixed to wall or laid under floor
PVC (SWR) single socketed in any length with rubber ring joint fixed with wall of 110mm as in rain water pipe
PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 75mm
PVC SWR branch piece single equal or unequal 110mm
PVC SWR branch piece single equal or unequal75mm
PVC(SWR) bends any radius 110mm.
PVC(SWR) bends any radius 75mm.
S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and conneting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm complete all as specified and directed.
S&F in repair Vitreous china wash down water closet white orissa pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) incl. P or S trap, lean concrete, complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repair wash hand basin vitreous china size 550x400mm white flat back including CP pillar tap heavy duty as approved by GE ,waste,chain plug,pvc connection, pvc waste pipe complete all as specified and directed.
S&F in repair CP Mixer single lever basin mixer fancy type for WHB / Sink with double action for hot/Cold water complete all as specified and as directed.
PVC connection of PTMT nuts 15x600mm long fixed in repair.
PVC connection of PTMT nuts 15x450mm long fixed in repair.
S&F in repairs PVC low level flushing cistern 10 ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc. complete all as specified and as directed.
Taking down aluminum windows including frame if required and repair the same including repair of rubber beadding,aluminum clip,adjusment of glasses,repair of floor spring or hydraulic door closer with oiling or greesing etc.ajusment of horizontal, vertical or middle style, complete all as specified and as directed.
Waste pipe 32mm for WHB with coupling fixed in repairs.
Waste pipe 40 mm for SINK with coupling fixed in repairs.
Dismantling wrought iron or mild steel work of any description not other wise provided, Complete all as specified and directed.
S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0 , complete all as specified and as directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height, complete all as specified and as directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc500 ltr and n exc 1000 ltrs)including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height complete all as specified and as directed.
S&F in repair PVC lid for water storage tank of capacity 500 Ltrs of approved make complete all as specified and as directed.
S&F in repair PVC lid for water storage tank of capacity 1000 Ltrs of approved make complete all as specified and as directed.
Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed .
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed .
M&L for 75mm PCC thick 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation, conconrete mass filling complete all as specified and directed.
M&L for prepolished chequered cement concrete tiles of size 300x300x25mm thick, made using vibratory mechanical system having glazed top layer and set, jointed and pointed in neat cement slurry with white cement and pigment as in treads / floor etc. over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed .
M&L for cement concerte 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in cills, steps, seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates, bond stones etc. including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed .
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Description all as per srl item No 20 but in vertical surface / skirting, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
M&L for 100mm thick PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate) as in path/ hardstanding, laid in panels with 6mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/ PCC Path and paving and finishing the top surface even and fair without using extra cement complete all as specified and as directed.
S&F in repair Angle valve / Stop valve15mm bore cast copper alloy chromium plated fancy type without shank and cup concealed type screwed for iron pipe or for union complete all as specified and as directed.
M/s Lal Enterprises
M/S SHIMAR STAR GLACIER
M/S NORTHERN ELECTRICAL WORKS
Alishan Builders
ZAHOOR ENGINEERING WORKS
M/S ATTAR BUILDERS
M/S DFA Enterprises
M/S Vivek Gupta and Co
mirandcompany
M/S REDLY ENGINEERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .