Renovation to the Div-III offices on the second floor of Vidyut Bhavan building at Curti, Ponda.

Providing and making plywood table for officer as per the patem shown in drawing and made with of 19mm playwood with drawer unit comprising of 2drawers of depth 6", 1 filling shelf fixed with pull out door (box typehinges)locks D type handles and all accessories to be provided . all drawers on telesscopic channels.inside laminated with 1mm laminate .the table to be topped with 1mm laminated sheet.the side unit is provided with two drawers and filling shelf with two pull out doors,finished in same manner ,CPU platform with foot rest to be provided.

Table for EE cabin with Side table -Supply of modular table size 1800mm W x 750mm D x 750mm H with side storage 1600mm W x 450mm D x 650mm H, Table top:25 mm thick BWP ply including 1mm thick laminate, finishedwith 2mm thick PVC edge banding. Support : 25mm thick Gable end & 18mm thick modesty in BWP ply, all exposed edges finished with 2 mm thick PVC edgebanding . Wire management :provision for cable manager cubby/chargig ports will be done as per requirement. Special Note:4mm x 4mm grooving in modesty panel as per drawings. Side storage:unit made out of 18 mm thick BWP Plyincluding 1mm thick laminate of approved shade at all exposed areas & 0.8mm thick balancing white at inner areas, all exposed edges finished with 2 mm thick PVC edgebanding .Hinges & Telesdcopic channel (soft closing),all shutters to have finger groove space for opening.

Providing and fixing double skin partiton with frame of size 75mm x 38mm and internal frame of 50mm x 38mm and fixing 12mm marine plywood one shade of approved lamination on both sides as per direction of enginner

Providing and making plywood table for staff running counter done using of 19 mm plywwod structure and 1 number of drawer of depth 6"and one open type filling shelf ,finished with 1mm tk laminate on exposed internal surfaces and 0.8 mm laminate in con exposed surfaces with locks ,handles and all the accesories.

Providing and fixing storage door for cabinet under sill level of 19mm plywood structure comprising of intermidiate horizontal one partition,finished with 1 mm laminate inside and outside and frame made up of 19 mm plywood,bottom and top boarder of 0.15cm with locks ,handles and all accessories

Providing and fixing filing cabinet for a height up to ceiling made of 19mm plywood structure comprising of intermediate horizontal racks with openable types doors,finished with 1mm laminate and teak wood beadings neatly melamine polished and inside finished with 1mm laminate , with locks ,handles and all accessories.

PVC false ceiling grid type : Providing and fixing PVC False Ceiling consisting of 600mm x 600mm, 5mm(±0.25) thick Plain PVC sheet of 600 kg/Cbm Density Manufactured by an ISO-9000 certified Company, used as panel insert in a frame work made using anodized aluminum T- section of sizes 1” x1” (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’x2’(600x600mm). The aluminum frame work is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” (25x25mm) angles etc. Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing.

Providing and fixing vertical blinds screen line /yorks/cream make or equivalent ,vertical blinds of 100 mm width along with fitting etc.complete as per the directions of the engineer in charge.

Providing and fixing 12 mm sheets flat pressed three layered melamine faced prelaminated wood based particle board bonded with BWP/BWR exterior grade synthetic resin panelling / cladding as for wall panelling / cladding as per IS-3087 (1985) type I one side approved shade and other side balancing white lamination of Novapan make or equivalent to be fixed to frames by cleates, leaving expansion allowance of 6 MM in between each panel. The width of the panel can be 1.5 feet/2 feet/3 feet as per Architects discretion.

Second class teak wood.

Providing and fixing flush doors shutters commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering and vertical grains or cross bands and face veneers on the both other faces of shutters

35mm thick including anodized aluminium butt hinges with necessary screws:

Provided and fixing chromium plated brass 100 mm. mortice latch and a pair of levers and handles with necessary screws etc. complete (Indian make of approved quality).

Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.

Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete

PARTITION:- Providing & fixing Partitions Yashashri make or equivalent, made out of frame support structure in 2” x 1” M.S. sq tube & walls paneled by 20mm x 155mm x 1.2mm Upvc multi cavity section fixed on structure with hidden screwing system. Door frame & shutter made out of 50mm x 50mm x 2.5mm & 31mm x 150mm x 1.5mm Upvc multi cavity section. Some portion of partition can be made by 4mm fixed glass. The average weight of Partition is 17 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods

Providing & fixing Two Track sliding window in economical section made out of 60mm x 45mm x 2.5mm Upvc multi cavity track section & Shutter made out of 57mm x 31mm x2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Economical) is 12.25 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section

Plain glass

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed partitions

Plain glass

Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section

12mm cement plaster 1:4 (1 cement : 4 fine sand)

Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of distemper primer of approved brand and manufacture on wall surface.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Repairs to the deteriorated /damaged areas of RCC elements in the structures shall be carried out by using Polymer modified repair mortar. The polymer modified mortar is applied when the epoxy bonding coat is still tacky. In one application 20 mm thickness shall be built.Subsequent layer shall be built with one bond coat of Polymer modified cement slurry. The Polymer modified repair mortar shall have the following specifications:• Cement (OPC) : 100 kg • Clean river sand - 2.36 mm down : 300 kg Or 30-80 Graded quartz sand•Polymer latex (Monobond) : 10 kg• Water : 30 litre (Approx)Cure by spraying periodically with water for 3 days and allow to dry for next 5 days. incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.

Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.

With cement mortar 1:4 (1 cement : 4 fine sand)

SCHEDULE- B (ELECTRICAL) Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)

8 way (8+24), double door, Horizontal type Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.'

SP, Cat B

Supplying and fixing following rating four pole 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required

40 A, Cat B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.

2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)

2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit (heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C -- with Cat A Modular Accessories

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connection painting etc. as required. CAT B

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet and 15/16 A modular switch connection painting etc. as required. CAT B

Supplying and fixing call bell/ buzzer suitable for single phase 230 V complete as required

(a) Ding Dong Bell

Supplying and fixing of following sizes of rigid PVC conduit along with accessories in surface (medium) / recess (heavy) including cutting the wall and making good the same in case of recessed conduit as required. (a) 20mm.

Supplying and fixing of following sizes of rigid PVC conduit along with accessories in surface (medium) / recess (heavy) including cutting the wall and making good the same in case of recessed conduit as required. (b) 25mm.

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing required number of modular switches , connection painting etc. as required. ( For group controlled points) (a) Cat A

Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.

Supply and fixing of BLDC 1200mm, 32 watts, ceiling fan with remote.

Supply of split air conditioners conforming to IS 1391(part-2) 1992 with AMD no 1 to 4 conformartion to the following specification: a) Type: High wall mounted split type air conditioner. b) Capacity 2TR capacity with remote control consisting of indoor and outdoor unit standard copper pipe for suction with insulation and copper pipe for discharge with insulation having built in time delay features, Auto start facility, Three speed cooling capacity, Oscillating louvers with rotary compressor, LCD display on board and cord less remote. c) Star rating: BEE 3star and above d)Air circulation: 900m3/hr. e) Refrigerant: HCFC R-22 f) Autoswing: 4 way g) Operating Voltage: 230V AC, 50Hz, 1ph Preferred make: VOLTAS, BLUE STAR, CARRIER, HITACHI.

Supply and Installation of suitable voltage stabilizer operating on single phase AC supply complete with time delay switch off reputed makes like Servel/ V guard/Everest.

Providing and fixing of suilatble stand for outdoor unit of 2 TR split type Air conditioner of 2 TR capacity.

Installation Testing and commissioning of cordless type high wall split type air conditioner of 2TR capacity.

Supplying and erecting LED square / circular 9 to 12 W downlighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for spring loaded mounting clips for flush type or recess type complete.