Road safety work at Kulpahar Nawgaon road (MDR) in km. 1,2,3,4,5,6,7,8(350)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35

Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 +205. The finished surface to be level, uniform and free for streaks and holes. (As per MORTH specification no 803(8.13) Repated Bar Marking.

Reflective Raised Pavement Markers(CatEye/RoadStud)Supply and fixing or raisedpavement marker with Made of Plastic body or RPM/ Road Stud shall bemoulded from ASA (Acrylic Styrene Acrylonltrite) or HIPS (High-lmoact Polystyrene) or AcryloniitrileButadien Styrene (ABS) or Any other su,table material approved by the Engineer. The Marker shallsupport aloadof13.635 kg testedInaccordance withASTMD4280.The Reflective panels shallcons,stof number of lenses containing single or dual prismatic cubes capable or providing total internal reflection of the light entring the lens face Lenses shall be mouled of methyl methecrylale conformingtoASTM0788 of equivalent.The sloporretro-reflectingsurface shallpreferablybe 35+/.Sdegreet obaseand the area oleac hretro -reflecting surface shall not be less than 13.00sq.cm.them arkerheight shall not be less than 10mm and shall not exceed 20mm&Widthshallnot exceed 130mm.Thebase of the marker shall be flat within 1.3 mm allroad studs shall be legibly marked with the name , trade or other mean so fidentification or the manufacture. epoxy Installations,excess adhesive around theedgeorthemarker,excess adhesiveon the pavement and adhes, veontheexposed surfaces or the markers shall be Immediately removed. The contractor shall submit a two year warranty for satisfactory field perfonnance Including stip ulated retro-reflect anceof the reflecting panel, to the Engineer. Inaddition.at woyear warranty ror satisfactory Infield performance of the finishedroadmarker shallalsobegivenbythe contractor wiho carries out the work of fixmg of reflective road markers. In case the markers aredisplaced , damaged , gel worn out or lose their reflectivity compared to stipulated standards , thecontractor would be required to replace all such markers within 15 days of the intimation from theEngineer. at his own costThe rate shallInclude all materials, labour, T&P, transportation,lnstalla onandincidentalsallcomplete asper direct,onoltheEngineer-on-Charge RPM(withshank)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (As per MORTH specification no 801(X) Hazard Board

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (As per MORTH specification no 801(8.4 (VIII) SINGLE CHEVRON (NORMAL)