Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.4 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹73.7 L+₹15.9 L (27.5%)Rejected-Finance H NO 547 MAHADEV CIRCLE INDIRA COLONY JAISALMER RAJASTHAN 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Higher amount quoted | |
| 3 | L3₹78.1 L+₹20.3 L (35.1%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L3 | Rejected-Finance Higher amount quoted | |
| 4 | L4₹84.2 L+₹26.4 L (45.7%)Rejected-Finance | L4 | Rejected-Finance Higher amount quoted | |
| 5 | L5₹88.9 L+₹31.1 L (53.8%)Rejected-Finance | L5 | Rejected-Finance Higher amount quoted |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
20 Sept 2021, 6:00 pmClosed
CWE (A) Jaisalmer
CWE (A) Jaisalmer
REPAIR AND RESURFACING OF ROAD, CULVERT, KERB STONE AND ROAD FURNITURE IN CERTAIN UNITS IN ZONE-II AREA AT MIL STN JAISALMER UNDER GE (A) JAISALMER
2021_MES_468272_1
83970
Open Tender
Civil Works - Roads
Works
180 days
Jaisalmer
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,000
GE (A) Jaisalmer
₹2.2 L
Yes
1 Feb 2022
16 Aug 2021
22 Sept 2021
16 Aug 2021
20 Sept 2021
6 Sept 2021
Amount
M&L for bituminous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bituminous VG-30 Grd) content by weight of total mix including prepration of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat of bitumen VG-10 grade @ 5Kg/10 Sqm by mechanical sprayer rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge (Note: Repair of road to be carried out in patches).
Premix bituminous macadam,with VG-30 and 4% binder content laid /rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less)with paving bitumenous includiing prepration @ 4% by weight of total mix complete rolling to uniform smooth surface with 8 to 10 ton power road roller complete all as specified and directed by Engr-in-charge
M&L for repair to pot holes of any depth, not exc 1.00 sqm each including sweeping free from dust and mud, or water, scouring sunken surface in roads, paths, etc, cutting around edges to at least 25mm in depth making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadem, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again will rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm
M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.
Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.
Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. NOTE : Dealineator to be of Solar type only.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping etc including weathering, slightly rounded or chamfered angles and throating including necessary form work all as specified.
Dismantling of kerb stone of any description or thickness in floors, aprons etc.pointed in any mortar complete all as specified and directed.
M & L Stone kerb of Lime or sand stone of roughly squared stones of size 30cm x 15cm x 45cm and top one side rounded (half of the width) dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush. NOTE :- Each stone shall not be less than 45 cm except where required as closer or on curve as in repair.
M&L for painting two coat yellow/Black/Red Synthetic enamel paint over one coat priming paint on new kerbs stone surface including preparation on new kerbs stone surfaces and complete all as specified.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation/ filling/ mass concrete all as specified.
Demolition for RCC roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work
M&L RCC (1:1.5:3) type A1 using 20mm graded stone aggregate as in roof slab complete all as specified & directed by Engr-in-charge.
Formwork to soffit of roof slab, landing & similar work, exc 200mm thick complete all as specified.
Formwork to edges , on concrete flats breaks, sides of roof slab, landing & similar work, exc 200mm thick complete all as specified.
M&L for MS steel TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, hooking ends and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified.
Demolition of stone masonry built in cement mortar incl coping of any description all as specified and directed.
M&L squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified.
M&L squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 except stone all as specified.
M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for applying two coats of cement base paint over a coat of primer after preparation of newly plastered surfaces complete all as specified.
Bhawani Construction Company
GEMRARAMCONTRACTOR
Jagdish Prashad and Company
M/s Brij Construction And Engineers
SATI MATA CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .