REPAIR TO JOINERY, PETTY REPAIR, WINDOW GLASS, PLINTH PROTECTION, ROOF, PLASTERING, FLOORING IN MD ACCN IN ZONE-I UNDER GE (A) JAISALMER

Amount

Resecuring without taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

Resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified by Engr-in-charge

Resecuring or easing & adjusting without taking down shutters of any description exc 1 and n exc 2 sqm each

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and white wash and cement base paint complete finished all as directed

Ditto- all as per item No 5.00 above but exc 1.5 sqm and n exc 4 sqm each

Running welding in repair thickness of metal to be welded n.exc 6mm

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, S&F in opening as per specification & drawing given in SSR 2010.

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing.

S&F Pressed steel frames for doors size of 125mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge

S&F Pressed steel frames for doors size of 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge

S & F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats second class hard wood 35mm thick for door shutter all as specified and directed

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed

S & F aluminium anodized tower bolt 150mm size complete all as specified and directed.

S & F Butt hinges Aluminum 100 mm type C21 complete all as specified and as directed

S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed

S & F aluminium handle 125 mm cast type anodized

S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

M & L preparation of new wooden surfaces exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.

M&L preparation of new decorded steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a one coat of red oxide zinc chrome primer

S& F Galvanized mild steel wire cloth, .56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples fixed

Hacking out old broken glass of any thickness size,quality or description from metal frames and S&F 3mm thick frosted glass with glazing clips and oil putty complete as directed by EIC.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

M&L for 25 thick sand cushing for laying of precast concrete interlocking tiles including watering and consolidation complete.

M & L for 60mm thk, M 35 grade machine pressed precast concrete interlocking paver block rubber mould using grey cement and no pigment of any shape and size conforming to IS 15658 - 2006 all as specified and ditected.

S & F rubber moulded chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cement and pigments,set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:4 complete.

M&L for PCC 1:2:4, 75mm thick using 20mm graded aggregate as in flooring.

M& L for PCC 50mm thk type C1 1:3:6 (20mm graded stone aggregate laid in alternative as in plinth protection including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar

M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes screeding and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laying floor finishes all as specified and directed.

M&L sand stone slabs 5cm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete

Taking down cement plaster on brick/stone/concrete surface including wall tiling or terrazo finish and hacking out joints hacking for key scrubbing down with water etc complete

M & L rendering 15mm thick on surface of stone masonry or surface other than fair face of brickwork in CM 1:6 all and it is to be finished even and smooth without using extra cement all as specified

M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:4 & finished the surface even & fair without using extra cement all as specified.

M&L for rendering 5 mm thick on fair faces faces of brick work or concrete surfaces of ceilings in cement plaster 1:3 & finished the surface even & fair without using extra cement all as specified.

M & L preparation of new plastered surfaces and applying two coat of oil bound distember over a coat of white wash on walls complete

M & L for two coats of cement base paint over a coat of primer on walls

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles).

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, joint free non skid tiles and including scread bed or bedding layer 15mm thick in CM 1:6 all as specified.

M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed (size 600mm to 600mm)

M & L non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding .11Sqm but n.exc .18Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M & L glazed ceramic coloured tiles (450x300mm)x 7mm thick joint free in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 etc.

Dismantling boarding of any description fixed in any position fixed with screws Complete all as Specified & directed.

S & F 18/19mm thick pre-laminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination alround 6mm th teak fillets fixed in kitchen CB or pelmet complete all as specified.

M&L for 2nd class hard wood fillets square, rectangular as in lippings fixed with nails of area exc 3Sqcm but n.exc 6sqcm complete all as specified & directed.

S & F 40mm width of flaps (when open) continuous (piano) hinges, mild steel bright finish or electroganised fiwed to wooden or angke iron frame Complete all as Specified.

S&F40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as Specified.

S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws /fixed in repairs Complete all as Specified & directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as Specified.

S&F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs Floor door stopper of aluminium alloy body 140mm long Complete all as Specified.

S&F in repair aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .

S&F in repair aluminum handles cast type, anodised, 150mm size Complete all as Specified & directed.

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples Complete all as Specified & directed.

S&F in repair 4 lever mild steel mortice lock, vertical type, size 100 mm

S&F aluminium die cast body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed approved by Engr-in-Charge

S & F in repair anodised aluminium alloy Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.(Curtain rods )

S & F in repair butt hinges Aluminum 100 mm type C21 complete all as specified and as directed

AMBEY MAA CONSTRUCTION COMPANY

Leelashah Enterprises

M/s Shri Inder Construction Company

M/S MAYA CONSTRUCTION COMPANY