Maint to MD Accn Furniture under GE Satwari

Amount

Note:- Removal of following (Sr.No. 1 to 18) existing unserviceable wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be French polished with high gloss finish in light Walnut shade ,after properly cleaned and smoothened the surface. All kind of work will be executed where the furniture exist in different User Units of GE Satwari including BSO's Furniture Yard, and office hours only as directed by Engineer-in-Charge Timber shall be of First class deodar wood for items.

Bed hard:FD-246: Top shall be 12 mm thick BWR grade plywood. Make-Archidply/Century Ply/ Greenply.

Head Rest as per drg.

Foot Rest as per drg.

Long Rail as per drg.

Stiffener as per drg.

Polishing

Chair dining ,FD-279,262,228,1105:- Back rest

Leg stiffner

Front legs

Rear legs

Rails

Polishing

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Removing the existing unserviceable cane plastic from the chair and S&F PVC seat 4mm thick in lieu of cane after providing corner & centre support if necessary.The PVC seat shall be fixed with proper size screws and good workmanship .Due care shall be taken while fixing the PVC seat, the gaps if appears be filed with putty mixed with adhesive so as to make surface smooth and tidy. The PVC seat shall got approved from GE before supply. Make - Amko.

Chair writing,FD-261,280,250:- Back rest

Leg stiffner

Front legs

Rear legs

Rails

Polishing

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Chair dining Officers FD/MAP-II/04:- Back rest

Vertical stiffner

Front legs

Rear legs

Stiffner

Rails

50 x 50 x 15 mm SS right angle bracket between leg and rails fixed with steel screws 8 nos in one chair

Seat made of 12mmm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth as approved by GE.

Polishing

Side board FD-1112:- Top shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Greenply/Century Ply/Archid Ply .

Shelf shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Greenply/Century Ply/Archid Ply

Drawers, fornt shall be 18mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, 4mm thick teak wood edging shall be provided to all edges of MDF board in matching shade with synthetic adhesive. Sides and back of drawers shall be of 12 mm thick BWR grade plywood. Bottom of drawers shall be of 6 mm thick BER grade plywood.Make of MDF board & Ply : Greenply/Century Ply/Archid Ply

Shutter with 2-3mm thick SS piano/frog hinges & screws as approved by GE. Shutter shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Greenply/Century Ply/Archid Ply

Back, shall be 12 mm thick BWR grade plywood as per drg. Make of MDF board & Ply : Greenply/Century Ply/Archid Ply

Side shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade at open end with synthetic adhesive(Fevicol SH). Make of MDF board : Greenply/Century Ply/Archid Ply

Leg/base of 75 mm high 19 mm thick teak wood with matching shade polish

Polishing

Table 900x600 mm without drawer:- FD-42,55,231&284:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Legs as per drg.

Long Rails as per drg.

Short Rails as per drg.

Leg Stiffener as per drg.

Polishing

Teapoy wooden ,FD-33,232,278:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Greenply/Century Ply/Archid Ply

Legs as per drg

Long Rails as per drg

Short rails as per drg

Stiffener as per drg

Polishing

Table centre ,FD-29,235,375 & 274:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Legs as per drg.

Long Rails as per drg.

Short Rails as per drg.

Stiffener as per drg.

Polishing

Table dining 6 person:-FD-239 & 273,1115:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century /GreenMDF/Actiontesa.

Legs as per drg

Long rails as per drg

Short rails as per drg

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw

Polishing

Table writing:-FD-33,249 & 275:- Adjacent sides of the box. All the four sides of the box shall be 12 mm thick BWR grade plywood ,as per drg.Make of plywood - Archidply/Century ply/Greenply.

Shutter made out of 18mm thick prelaminated MDF board One side laminated with light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading with synthetic adhesive(Fevicol SH) to be fixed with piano type hinges as per drg.

Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Legs as per drg

Long rails as per drg

Long stiffener as per drg.

Short rails as per drg

Polishing

Sofa set 5 seater,(3+1+1 with cushion) FD-281:- Leg of size 70mmx35mm in section made to shape as shown on drg.

Arm of size 35mmx70mm in section made to shape as shown on drg.

Wooden batten of size 50mmx20mm shall be fixed as shown on drg.

Bearer of size 40mmx40mm as shown on drg

Taking out old pressed /torn old cushions from Nos set and Supply 32 density thick foam cushion of size 21”x22”x4” duly covered with the GM fabric as approved by GE.Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line or equivalent in sleep well).

Polishing

Taking out old torn faded cushion cover from old cushions and S&F new cushion cover to the existing cushion. The cover of the cushion shall be GM fabric as approved by GE. Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting.

Sofa set 4 seater FD-281:- Leg of size 70mmx35mm in section made to shape as shown on drg.

Arm of size 35mmx70mm in section made to shape as shown on drg.

Wooden batten of size 50mmx20mm shall be fixed as shown on drg.

Bearer of size 40mmx40mm as shown on drg

Taking out old pressed /torn old cushions from Nos set and Supply 32 density thick foam cushion of size 21”x22”x4” duly covered with the GM fabric as approved by GE.Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line or equivalent in sleep well).

Polishing

Peg Table : FD-384 , 277 ,236:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/Archid /GreenMDF/Actiontesa.

Long Rails

Short Rails

Stiffener

Polishing

Table dining 4’x3’ (1200x900 mm) :-FD-273:-Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Legs as per drg

Long Rails as per drg

Short Rails as per drg

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw.

Polishing

Table dressing ladies FD-251:- Back shall be 12mm thick BER grade plywood as per drg. Make of Ply : Centuryply/Greeply/ Archidply.

Top shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Bottom shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Drawers, fornt shall be 18mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, with 4mm thick teak wood edging shall be provided to all edges of MDF board in matching shade fixed with synthetic adhesive. Sides and back of drawers shall be of 12 mm thick BWR grade plywood. Bottom of drawers shall be of 6 mm thick BER grade plywood.Make of MDF board & Ply : Century/GreenMDF/ Actiontesa.

Legs as per drg in teak wood with matching shade polish

Looking mirror of size 366 x 1220 mm and 5 mm thick .Make-Saint gobain ,Modi Float, Triveni Float Glass

Polishing

Table dining 8 person:-FD-239 & 273,1115, FD/MAP-II/03:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century /GreenMDF/Actiontesa.

Legs as per drg

Long rails as per drg

Short rails as per drg

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw

Polishing

Chair dining Type-I 'A' HFD-2030:- Front legs

Rear legs

Rails

50 x 50 x 15 mm SS right angle bracket between leg and rails fixed with steel screws 8 nos in one chair

Back made of 12mmm thick BWR grade plywood over which 40 density foam 50mm thick shall be provided duly covered with best quality tapestry cloth as approved by GE.

Seat made of 12mmm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth as approved by GE.

Polishing

Table office officer:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century /GreenMDF/Actiontesa.

Drawers shall be as per existing Shape and pattern. All sides shall be first class sheasham wood and bottom shall be 6mm thick ply. Brass/ SS handles/Knobs as per sample approved by GE.

Polishing

Removal of following (Sr.No.19 to 28)existing unserviceable wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be Deco polished with high gloss finish in light Walnut shade ,after properly cleaned and smoothened the surface. Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century /GreenMDF/Actiontesa. All kind of work will be executed where the furniture exist in different User Units of GE Satwari including BSO's Furniture Yard, and office hours only as directed by Engineer-in-Charge Timber shall be of First class Teak wood for items.

Bed hard:FD-246: Top shall be 12 mm thick BWR grade plywood. Make-Century Ply/ Greenply.

Head Rest as per drg.

Foot Rest as per drg.

Long Rail as per drg.

Stiffener as per drg.

Polishing

Chair dining Officers FD/MAP-II/04:- Back rest

Vertical stiffner

Front legs

Rear legs

Stiffner

Rails

50 x 50 x 15 mm 2mm thick SS right angle bracket between leg and rails fixed with steel screws 8 nos in one chair.

Seat made of 12mmm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly covered with GM fabric Pattern - 55060, Composition of 65% Poly & 35% of Cott or as approved by GE.

Polishing

Peg Table : FD-384 , 277 ,236:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century /GreenMDF/Actiontesa.

Long Rails

Short Rails

Stiffener

Polishing

Sofa set 5 seater,(3+1+1 with cushion) FD-281:- Leg of size 70mmx35mm in section made to shape as shown on drg.

Arm of size 35mmx70mm in section made to shape as shown on drg.

Wooden batten of size 50mmx20mm shall be fixed as shown on drg.

Bearer of size 40mmx40mm as shown on drg

Taking out old pressed /torn old cushions from Nos set and Supply 40 density thick foam cushion of size 21”x22”x4” duly covered with GM fabric Pattern - 55060, Composition of 65% Poly & 35% of Cott or as approved by GE.Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line).

Polishing

Taking out old torn faded cushion cover from old cushions and S&F new cushion cover to the existing cushion. The cover of the cushion shall be GM fabric Pattern - 55060, Composition of 65% Poly & 35% of Cott or as approved by GE. Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting.

Sofa set 4 seater FD-281:- Leg of size 70mmx35mm in section made to shape as shown on drg.

Arm of size 35mmx70mm in section made to shape as shown on drg.

Wooden batten of size 50mmx20mm shall be fixed as shown on drg.

Bearer of size 40mmx40mm as shown on drg

Taking out old pressed /torn old cushions from Nos set and Supply 40 density thick foam cushion of size 21”x22”x4” duly covered with GM fabric Pattern - 55060, Composition of 65% Poly & 35% of Cott or as approved by GE.Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line).

Polishing

Teapoy wooden ,FD-278:- Top

Legs as per drg

Long Rails as per drg

Short rails as per drg

Stiffener as per drg

Polishing

Table centre ,FD-29,235,375 & 274:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Legs as per drg.

Long Rails as per drg.

Short Rails as per drg.

Stiffener as per drg.

Polishing

Table dining 6 person:-FD-239 & 273,1115:- Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century /GreenMDF/Actiontesa.

Legs as per drg

Long rails as per drg

Short rails as per drg

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw

Polishing

Table writing:-FD-33,249 & 275:- Adjacent sides of the box. All the four sides of the box shall be 12 mm thick BWR grade plywood ,as per drg.Make of plywood - Archidply/Century ply/Greenply.

Shutter made out of 18mm thick prelaminated MDF board One side laminated with light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading with synthetic adhesive(Fevicol SH) to be fixed with piano type hinges as per drg.

Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Legs as per drg

Long rails as per drg

Long stiffener as per drg.

Short rails as per drg

Polishing

Table dressing ladies FD-251:- Back shall be 12mm thick BER grade plywood as per drg. Make of Ply : Centuryply/Greeply/ Archidply.

Top shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Bottom shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of MDF board : Century/GreenMDF/Actiontesa.

Drawers, fornt shall be 18mm thick exterior grade pre-laminated MDF board both side laminated in existing/light Wallnut shade or as approved by GE, with 4mm thick teak wood edging shall be provided to all edges of MDF board in matching shade fixed with synthetic adhesive. Sides and back of drawers shall be of 12 mm thick BWR grade plywood. Bottom of drawers shall be of 6 mm thick BER grade plywood.Make of MDF board & Ply : Century/GreenMDF/ Actiontesa.

Legs as per drg in teak wood with matching shade polish

Looking mirror of size 366 x 1220 mm and 5 mm thick .Make-Saint gobain ,Modi Float, Triveni Float Glass

Polishing

M/S Sukhmani Construction Co.

M/S RAJ ENGINEERS

KHAJURIA BUILDERS

K K ENGINEERS AND CONTRACTORS

PACHNANDA BUILDERS

Harson Enterprises