Under District Ayodhya, Construction of public toilet in DIOS office premises, Lot No 17

Earth work in excavation by mechanical means (Hydraulic excavator manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and for all lift AS per DSR 2.6.1 pg 91 vol 1(2023)

Laying of C:C 1:4:8 (Zone III) derived natural sources : 8 graded stone aggregate 40mm nominal size derived from natural sources As per DSR 4.1.8 pg 103 vol 1 (2023)

Brick wrok 1:6 cement: coarse sand with common burnt clay F.P.S (non modular ) bricks of class designation 7.50 in foundation and plinth Asper DSR 6.1.2 ph 127 vol1 2023

Banking excavated earth by mechancical / manual means in layers not exceeding 20cm in depth breaking clods, watering ,rolling AS per DSR 2.3.1 pg 91 vol 1 2023

Providing and laying of R:C:C 1:1.5:3 ( 1 cement:1.5 coarse sand (Zone-III) derived from natural sources:3 graded stone aggregate 20mm nominal size derived from natural sources As per DSR 5.1.2 pg 113 vol 1 (2023) in plinth band

Brick wrok 1:6 cement: coarse sand with common burnt clay F.P.S (non modular ) bricks of class designation 7.50 in super structure above plinth level Asper DSR 6.4.2 ph 127 vol1 2023

Brick wrok 1:4 cement: coarse sand with common burnt clay F.P.S (non modular ) bricks of class designation 7.50 in super structure above plinth level Asper DSR 6.4.1 ph 127 vol1 2023

Providing and laying of R:C:C 1:1.5:3 ( 1 cement:1.5 coarse sand (Zone-III) derived from natural sources:3 graded stone aggregate 20mm nominal size derived from natural sources As per DSR 5.1.2 pg 113 vol 1 (2023) in Lintel band

Steel work welded in built up sections /framed work , including cutting hoisting fixing in position and applying a priming coat in gratings frames , guard bar ladder ,railing,brackets gates and simlar works. AS per DSR 10.25.2 pg 185 vol 1 (2023)

RCC work with cement : coarse sand and 20mm stone grit in 1:1.5:3 in slab AS per DSR 5.5 pg 114 vol 1 (2023)

M.S iron work for R:C:C work as per DSR 5.22A.6 pg 118 vol 1(2023)

12mm thick plaster 1:6 cement : coarse sand mortar AS per DSR 13.4.2 pg 217 vol 2 (2023)(Inner side)

12mm thick plaster 1:6 cement : coarse sand mortar AS per DSR 13.4.2 pg 217 vol 2 (2023) (Outer side)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to 1S: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.AS per DSR 8.31

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.As per 11.39

Provinding & applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered well surface to prepare the surface even and smooth complete As per DSR 13.80 pg 223vol 2 (2023)

Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade AS per DSR 13.47.1 pg 220 vol 2 (2023)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC ( volatile organic compound) content less than 50 grams / litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour. AS per DSR 13.83.2 pg 223 vol 2 (2023)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade as per DSR 13.62.1 pg 222 vol 2 (2023)

Centering and shuttering including strutting, propping etc. and removal of form for plinth band, etc. for mass concrete AS per DSR 5.9.5

Centering and shuttering including strutting, propping etc. and removal of form for slab, etc. for mass concrete AS per DSR 5.9.3

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade | Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.21 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other sideAS per DSR 21.2.1

S/f of sign board

Internal electrification work

Wiring for light point/fan point with 1.50 sqmm FRLS PVC insulated copper conductor single core cable As per DSR 1.10.1 group A pg 2 2022

Wiring for light / power plug with 2x4 sqmm FRLS PVC insulated copper conductor single core cable AS per DSR 1.12 pg 3 2022

Wiring for circuit/ submain wiring

2x1.50sqmm + 1x1.50sq mm earth wire 1.14.1

2x4sqmm + 1x4sq mm earth wire 1.14.3

Supply & fixing brass batten /angle holder DSR 1.34 pg 7 2022

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, (handle lever), including flush pipe, with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :AS per DSR 17.2.1

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.AS per DSR 17.23

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.AS per DSR 17.31

Providing and fixing C.P. brass bib cock of approved quality conforming to 18:8931 : 18.49.1 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to 1S:8931. As per DSR 18.52.1

Providing & fixing of CPVC Pipe

15mm dia

20mm dia

25mm dia

32 mm dia

Supply & fixing of 110mm dia pvc pipe AS per SOR ch 01/17/31 pg 7

Supply & fixing of 90mm dia pvc pipe AS per SOR ch 01/17/32 pg 7

Providing & fixing of wash basin with CI brackets 15mm cp brass piller taps 32mm cp brass waste of standard pattern white vitreous china flat back wash basin 550x400mm with single 15mm C.P brass piller tap AS per DSR 17.7.4

Providing and placing on terrace (at all floor levels) polyethylene water storage IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR 18.48

HEP Nahani trap of Indian make HCI 100x75mm 4 Kg.As per SOR Pg no 37 item no 54

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests AS per DSR 17.1.1

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. AS per DSR 17.24

Please Enable Macros to View BoQ information