Transportation, installation, necessary fabrication, commissioning trial run of one no. 1000mm width, 1X9OkW, 550V, single drive belt conveyor along -11D from 72L to 73L for development of sector-F in R-VIIA seam at 3n4 Incline, J.P. Colly.

Amount

Transportation, installation, necessary fabrication, commissioning & trial run of one no. 1000mm width, 1X9OkW, 550V, single drive belt conveyor along -11D from 72L to 73L for development of sector-F in R-VIIA seam at 3&4 Incline, J.P.Colly.

Transportation of the 1000mm width, 1X90kW, 550V Drive Head complete including gear box, motor(90kW/550V), base frame, couplings, bearing blocks, fencing etc from 71L/-4D(R-VII) and installation at (72L-73L)/-11D (R-VIIA) with necessary fabrication job.

Transportation of Discharge Unit complete with girders, strike plate, chute plates, scrappers etc from 71L/-4D(R-VII) and installation at 72L/-11D (R-VIIA) with necessary fabrication job.

Transportation of Tail End Unit complete with fencing from 71L/-4D(R-VII) and installation at 73L/-11D (R-VIIA) with necessary fabrication job.

Transportation of 44mtr. 1000mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from 71L/-4D(R-VII) to 72L/-11D and installation from 72L/-11D to 73L/-11D in R-VIIA seam.

Loading, transportation, unloading & placing of one breaker(550 V/200A), starter (550V/90kW), LS unit from 71L/-4D(R-VII) to 72L/-11D(R-VIIA) (distance-approx. 3400mtr.) with help of haulages and 200mtr manual transport.

Transportation of 250mtr 3.3kV grade 70 sq.mm. PVCDWA cable from 71L/-4D(R-VII) after loading it on trolley and transport by haulages to 71L/16XD (R-VIIA) with 100mtr manual transport and laying-hanging of this cable from 71L/16XD(R-VIIA) ACB to 72L/-11D(R-VIIA) ACB. (Distance approx. 3400 mtr.)

Transportation of 100mtr. 1000mm width PVC belting from 71L/-4D(R-VII) after loading it on a trolley and transport by haulages to proposed the -11D belt installation site (R-VIIA) with help of haulages and 200mtr manual transport. (Distance approx. 3400 mtr.)

Laying, lapping, jointing & tensioning of this 100mtr. 1000mm width PVC belting in proposed -11D belt.

Transportation of 200mtr belt sequence cable from surface to 72L/16XD(R-VIIA) manually (distance- approx. 2400mtr), then laying-placing them from 72L Belt Starter at 72L/15XD(R-VIIA) to proposed -11D belt starter at 72L/-11D(R-VIIA)

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) from surface to proposed -11D belt installation site (R-VIIA) for 44mtr. belt and laying-placing them from 72L/-11D to 73L/-11D in R-VIIA seam.

Testing, trial run, alignment & commissioning of this belt conveyor from 72L/-11D to 73L/-11D in R-VIIA seam.

Civil foundation works for installation of 1 x 90kW, 550V, 1000 mm wide belt conveyer drive head and platform for VCB, Starter at 72L/-11D in R-VIIA seam of 3&4 incline, JPC

Recess cutting in stone

Cleaning of Debris/Muck

Sand filling

Brickwork with fly ash bricks in foundation & plinth in cement mortar 1:6

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources)

12 mm cement plaster of mix: 1:6

Loading material into tub and unloading at site

Roof heightening by drilling blasting in stone, cleaning, roof bolting including cost of drill rod, drill bit for the installation of proposed -11D belt conveyor in R-VII-A seam of 3&4 incline under JPC.

Roof heightening by drilling, blasting in stone including dressing, Cleaning with cost of drill rod and drill bit.(Excluding cost of explosive & detonator).

Roof bolting including carrying of materials from surface to u/g side, drilling, grouting & cost of drill rod and drill bit.

Supply of Materials

Supply of DA Cylinders

Supply of Oxygen Cylinder

Supply of MS Nut + Bolt of 5/8" X 2"

Total impact of GST for the purpose of CTC

BABLU SINHA

RINA ENTERPRISE