GE 874/EWS-33/2022-23

Amount

B/R and E/M Portion

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil.

Excavation in trenches n.exc 1.5m wide & 1.5m depth and getting out in any type of soil.

Returning filling in including spreading leveling watering & well ramming in layers n.exc 25cm thick all as specified.

Removing excavated materials soil n.exc 50m and depositing where directed at a level n.exc 5m above the starting point.

M&L PCC 1:4:8 type D-2 using 40mm graded stone as in foundation filling and mass concrete.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick walls in built in CM 1:4.

M&L Random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted ,built in CM 1:6 complete all as specified.

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in coping, plinth band, bed block, slabs including rounded or chamfered angle as directed including necessary formwork etc.

M&L Sand filling under floors or in foundations including watering and consolidation in layers complete all as specified and as directed.

M&L Hard core of guage n exc 63 mm of broken stone or boulders.

M&L 75mm thick PCC 1:4:8 type D-2(using 40 mm graded agg) as in sub base under flooring.

M&L for 40mm thick PCC 1:2:4 Type B-1 (using 20mm graded agg) as in sub base under flooring.

Rendering 15 mm thick in cement mortar 1:4 on fair face of brick masonry surface or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick in cement mortar 1:6 on fair face of brick masonry surface or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, lintel beams or shelves complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves/slabs including supports, overhangs, etc. also splays between floors and beams, etc all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS 456:2000 complete all as specified and directed by Engr-in-charge.

TMT bars, 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S & F glazed & skeleten shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats.

S&F frosted or grouded/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.

S&F 100 mm long butt hinges extruded aluminium anodised.

S&F 75 mm size mild steel butt hinges medium weight .

S&F 150mm long aluminium anodised barrel tower bolt of extruded section.

S&F 100 mm long aluminium anodised barrel tower bolt of exturded section.

S&F 75 mm long aluminium anodised barrel tower bolt of exturded section.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle.

S&F 100 mm long aluminium handles cast type anodised.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section.

M&L for 2nd class soft wood scantlings clean sawn, timber fixed as in rafters/purlins for roofing, ceiling all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F 20mm thick 2nd class softwood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and direced by Engr-in-Charge.

M&l for plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling 6mm thick all as specified.

M&L for 2nd class soft wood plain fillets square rectangular or triangular in section clean sawn secured with nails sectional area exc 3 & n.exc 6 Sqcm.

M&L Non skid ceramic coloured tiles 7-8 mm thick,area exc 0.11 sqm but n.exc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg).

M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick in CM 1:4 on fair faces of brick/stonewall surffaces for laying dado/skirting complete all as specified and directed by Engr-in-Charge.

S&F steel water tubing of nominal bore dia 15mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F steel water tubing of nominal bore dia 20mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white including plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed.

S & F Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling incl spreader complete all as specified.

S&F PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.

Supply & Fixing Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified.

S&F PVC connection 15 mm length 450mm.

S&F CP Bib taps fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.

S&F CP Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe.

M&L Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe 15mm dia complete all as specified and as directed.

S&F Chromium plated shower roses with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws.

S&F 1000 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I.

S&F PTMT ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule 20mm dia.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches.

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door.

S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door.

S&F PVC (SWR) reducers any radius 110mm bore.

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access.

PVC (SWR) vent cowl 75mm dia.

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement.

M&L for preparation of new or undecorated surfaces of wall and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic distmper over a coat of primer complete all as specified and as directed.

M&L for Preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L for Preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed.

M&L for 100 mm thk PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in subbase of floor.

M&L Chequered cement concrete tiles 20cm x20cmx25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment over 20mm thick screed bed or bedding layer in CM 1:4 as in floor complete all as specified and directed by Engr-in-Charge.

M&L for 50mm thick PCC 1:3:6 type C-1 as in flooring of plinth protection all as specified.

Construction of 25 users septic tank (brick construction) including inlet and out let chamber with top of slab at ground level including necessary earth work and disposal of surplus spoil to a distance not exceeding 50m supplying and placing vent pipe, in position to manhole cover brick construction and all other relevant works, complete, all as specified and shown on drawing No CESZ/TD-01/1086/2015.

Soakage wells of size 1.2 m dia x 3.0m deep excavation & earthwork in ordinary soil, fdn in PCC 1:3:6 wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonary/filling with brick bats,complete, all as specified and shown on drawing No.CESZ/TD-1104/2015.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes for 150mm SGSW pipe after they are laid and tested in PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

150 mm internal dia salt-glazed stonewere drain pipes laid in trenches and jointed as specified and directed.

M&L for excavation over area n.exc 1.50m deep and getting out in any type of soil.

Rolling and consolidating formation surface in cutting with power roller exc 8 tonne and n exc 12 tonne complete all as specified.

M&L 150mm thick PCC 1:4:8 type D-2 as in sub base,floor complete all as specified

M & L PCC 100mm thick type B-2, 1:2:4 ( Using 20 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement and making impressions of expanded metal, whilst the concrete is green.

M&L for form work to edges of concrete flats, treads, breaks in floors window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc 10cm but n exc 20cm wide.

Forming 12mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'B'. (thickness of concrete slab 150mm).

Forming dummy joints 10mm widex65mm deep primed and sealed with sealing compound grade `A'.

Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 2.50 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.

Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor

Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Supply & fixing Switch socket combination 2 in 1, 5 and 6 Amp universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips

House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified. Make: Havels/Anchor/Polycab/SSK.

1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathings suspended by insulating hangers not more than one meater apart including 4mm suspension wire one twin core cable plate or circular of size 10 sqmm 2 core complete all as specified and directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection single door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.

patriotic builders

Bidder Name

patriotic builders

M/S BEE AAY CONSTRUCTIONS